Roller Track for Doors
Combine track, mounting brackets, hangers, and end stops to create a system for hanging doors.
Powder-coated steel components are durable, so they resist wear and tear over time. Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors. 304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents.
Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Ceiling-mount brackets wrap around the outside of track and mount to the ceiling to act as supports and joints. Bolt them to joists or hang them from threaded rod. Brackets are required every 2 ft. of track.
Support brackets mount the track in the desired location.
Suspended brackets provide clearance between your track and ceiling. The two mounting holes also provide more track stability than standard ceiling mount brackets.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
With Debris Cap | |||||||
|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Support Brackets | |||||||
Powder-Coated Steel | |||||||
| 400 | 1 3/4" | 3 3/16" | Beige | No | 7/16" | 0000000 | 000000 |
| 600 | 2 1/4" | 4 9/16" | Beige | No | 9/16" | 0000000 | 00000 |
| 800 | 2 5/8" | 4 3/4" | Beige | No | 9/16" | 0000000 | 00000 |
| 1,000 | 2 5/8" | 5" | Beige | No | 11/16" | 0000000 | 00000 |
| 5,000 | 2 13/16" | 6" | Beige | No | 13/16" | 00000000 | 00000 |
Galvanized Steel | |||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 |
304 Stainless Steel | |||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 |
Suspended Support Brackets | |||||||
Powder-Coated Steel | |||||||
| 400 | 1 3/4" | 4 1/4" | Beige | No | 7/16" | 0000000 | 00000 |
Galvanized Steel | |||||||
| 400 | 1 3/4" | 4 1/4" | __ | No | 7/16" | 0000000 | 00000 |
Wall-mount brackets wrap around the outside of track and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
Support brackets are used to mount the track in the desired location.
Double-track brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
With Debris Cap | |||||||
|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Support Brackets | |||||||
Powder-Coated Steel | |||||||
| 400 | 1 3/4" | 4 11/16" | Beige | No | 7/16" | 0000000 | 000000 |
| 600 | 2 1/4" | 7 1/16" | Beige | No | 9/16" | 0000000 | 00000 |
| 800 | 2 5/8" | 7 3/16" | Beige | No | 9/16" | 0000000 | 00000 |
| 1,000 | 2 5/8" | 7 5/16" | Beige | No | 11/16" | 0000000 | 00000 |
| 5,000 | 2 13/16" | 8 3/16" | Beige | No | 13/16" | 0000000 | 000000 |
Galvanized Steel | |||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 00000 |
304 Stainless Steel | |||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 000000 |
Double-Track Support Brackets | |||||||
Powder-Coated Steel | |||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 |
Galvanized Steel | |||||||
| 400 | 1 3/4" | 8" | __ | No | 7/16" | 00000000 | 00000 |
Debris caps can also be attached to prevent dust and debris from getting inside the track (these should not be used as end stops).
| For Inside Track Wd. | For Track Capacity, lbs. | Ht. | Mounting Fasteners Included | Each | |
Galvanized Steel | |||||
|---|---|---|---|---|---|
| 1 3/4" | 400 | 2 1/4" | No | 00000000 | 00000 |
| 2 1/4" | 600 | 3 1/4" | No | 00000000 | 00000 |
| 2 5/8" | 800 | 3 1/4" | No | 00000000 | 00000 |
| 2 5/8" | 1,000 | 3 1/4" | No | 00000000 | 00000 |
| 2 13/16" | 5,000 | 4" | No | 00000000 | 00000 |
304 Stainless Steel | |||||
| 1 3/4" | 600 | 2 1/4" | No | 00000000 | 00000 |
| 2 1/4" | 600 | 3 1/4" | No | 00000000 | 00000 |
Dust-Resistant Roller Track for Doors
Round track reduces edges where dust and debris can accumulate. Combine track, hangers, and accessories to create a system for hanging doors. For durability and corrosion resistance, the track is made of galvanized steel.
Door stops (sold separately) mount to the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Debris caps keep dirt and debris out of the track and roller. They won’t prevent hangers from rolling off the track.
| Mounting Fasteners Included | Pair | |
| Yes | 0000000 | 00000 |
Corrosion-Resistant I-Beam Roller Track for Doors and Curtains
Build your own system for hanging doors and curtains in marine environments. The track is anodized aluminum and the hangers are 316 stainless steel for corrosion resistance. Combine track, hangers, joints, and accessories for a complete system.
For technical drawings and 3-D models, click on a part number.
Debris caps keep dirt and debris out of the track and roller. They won’t prevent hangers from rolling off the track.
