Safety Railings
Connect rails and posts with included slip-on fittings to quickly assemble a railing. They come unassembled, so you can cut them to length as needed.
Steel railings have a yellow powder coating for good visibility.
Aluminum railings are corrosion-resistant in wet environments.
Use add-on railings to extend the length of your railing. They include rails, fittings, and a post.
Select your own fittings, rails, and posts to create custom configurations. Rails and posts do not come with fittings.
Tees are used to connect rails and posts. Pass-through tees slide over a rail so you can add a post in the center. Joining tees connect the ends of two rails to a post.
Adjustable-angle fittings have a moveable joint, so you can position your rails at any angle. Tighten set screws to secure them to rails.
When properly installed, they meet OSHA 29 CFR 1910.29 requirements for guardrail systems.
For technical drawings and 3-D models, click on a part number.
No. of | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Top Rail Ht. | Rail Dia. | Color | Set Screw Hex Size | Mount. Hole Dia. | Mount. Hardware | Specifications Met | Posts | Mount. Holes | Each | |
Railings | |||||||||||
Powder-Coated Steel | |||||||||||
Straight | |||||||||||
| 4'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 0000000 |
| 6'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
| 8'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
Corner | |||||||||||
| 4'0" × 4'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 3 | 12 | 0000000 | 000000 |
Incline | |||||||||||
| 8'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
Aluminum | |||||||||||
Straight | |||||||||||
| 4'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
| 6'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
| 8'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 2 | 8 | 0000000 | 000000 |
Corner | |||||||||||
| 4'0" × 4'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 3 | 12 | 0000000 | 000000 |
Add-On Railings | |||||||||||
Powder-Coated Steel | |||||||||||
Straight | |||||||||||
| 4'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
| 6'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
| 8'0" | 42" | 1 7/8" | Yellow | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
Aluminum | |||||||||||
Straight | |||||||||||
| 4'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
| 6'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
| 8'0" | 42" | 1 7/8" | __ | 3/16" | 7/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1910.29 | 1 | 4 | 0000000 | 000000 |
Mount. Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Slip-On Framing Component Shape | For Rail OD | Color | Specifications Met | No. of | Dia. | Mount. Fasteners Included | Includes | Each | |
Powder-Coated Aluminum | |||||||||
Connector | |||||||||
| 90° Elbow | 1 7/8" | Black | __ | __ | __ | __ | Set Screws | 0000000 | 000000 |
| Three-Way 90° Elbow | 1 7/8" | Black | __ | __ | __ | __ | Set Screws | 0000000 | 00000 |
| Adjustable-Angle Elbow | 1 7/8" | Black | __ | __ | __ | __ | Set Screws | 0000000 | 00000 |
| Tee | 1 7/8" | Black | UL 2703 | __ | __ | __ | Set Screws | 0000000 | 00000 |
Through-Hole Connector | |||||||||
| Four-Way 90° Elbow | 1 7/8" | Black | __ | __ | __ | __ | Set Screws | 0000000 | 00000 |
| Tee | 1 7/8" | Black | UL 2703 | __ | __ | __ | Set Screws | 0000000 | 00000 |
| Cross | 1 7/8" | Black | __ | __ | __ | __ | Set Screws | 0000000 | 00000 |
| Adjustable-Angle Wye | 1 7/8" | Black | UL 2703 | __ | __ | __ | Set Screws | 0000000 | 00000 |
Rail End | |||||||||
| Round Flange | 1 7/8" | Black | __ | 4 | 7/16" | No | Set Screws | 0000000 | 00000 |
Through-Hole Rail Support | |||||||||
| Flange | 1 7/8" | Black | __ | 4 | 7/16" | No | Set Screws | 0000000 | 00000 |
| Ht. | Rail Dia. | Color | Each | |
Powder-Coated Steel | ||||
|---|---|---|---|---|
| 3'4" | 1 7/8" | Yellow | 0000000 | 000000 |
| Lg. | Ht. | Color | Mount. Slot Wd. | Mount. Hardware | Each | |
Aluminum | ||||||
|---|---|---|---|---|---|---|
| 4'0" | 4" | __ | 1/4" | Connecting Fasteners Included | 0000000 | 000000 |
| 6'0" | 4" | __ | 1/4" | Connecting Fasteners Included | 0000000 | 00000 |
| 8'0" | 4" | __ | 1/4" | Connecting Fasteners Included | 0000000 | 00000 |
Powder-Coated Aluminum | ||||||
| 4'0" | 4" | Yellow | 1/4" | Connecting Fasteners Included | 0000000 | 00000 |
| 6'0" | 4" | Yellow | 1/4" | Connecting Fasteners Included | 0000000 | 00000 |
| 8'0" | 4" | Yellow | 1/4" | Connecting Fasteners Included | 0000000 | 000000 |
Quick-Install Safety Railings
No assembly required with these one-piece railings.
Aluminum railings offer some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Mount. Holes | Without Toeboard | With Toeboard | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | No. of Posts | Top Rail Ht. | Rail Dia. | No. of | Dia. | Mount. Hardware | Specifications Met | Each | Toeboard Ht. | Each | |||
Aluminum | |||||||||||||
With Round Corners | |||||||||||||
| A | 2'0" | 2 | 42" | 1 1/2" | 2 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 0000000 | 4" | 0000000 | 0000000 |
| A | 3'0" | 2 | 42" | 1 1/2" | 2 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
| A | 4'0" | 2 | 42" | 1 1/2" | 2 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
| A | 5'0" | 2 | 42" | 1 1/2" | 2 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
| B | 6'0" | 3 | 42" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
| B | 7'0" | 3 | 42" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
| B | 8'0" | 3 | 42" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 0000000 | 000000 | 4" | 0000000 | 000000 |
Steel | |||||||||||||
With Round Corners | |||||||||||||
| C | 3'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| C | 5'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| D | 8'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| D | 10'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
With Square Corners | |||||||||||||
| C | 3'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| C | 5'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| D | 8'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
| D | 10'1 1/2" | 2 | 42 3/4" | 1 1/2" | 4 | 9/16" | Fasteners Not Included | OSHA Compliant 29 CFR 1926.1052 | 00000000 | 000000 | 4" | 00000000 | 000000 |
Slip-On Railings
Slip these posts and rails together for a complete railing—no fittings required. Use an add-on railing to create a longer length.
All railings come unassembled so you can cut them to length as needed.
For technical drawings and 3-D models, click on a part number.
No. of | ||||||||
|---|---|---|---|---|---|---|---|---|
| Top Rail Ht. | Rail Dia. | Mount. Hole Dia. | Mount. Hardware | Lg. | Posts | Mount. Holes | Each | |
Railings | ||||||||
Satin 316 Stainless Steel | ||||||||
Straight | ||||||||
| 42" | 1 1/2" | 7/16" | Fasteners Not Included | 8'0" | 3 | 12 | 0000000 | 0000000 |
Corner | ||||||||
| 42" | 1 1/2" | 7/16" | Fasteners Not Included | 4'0" × 4'0" | 3 | 12 | 0000000 | 000000 |
Add-On Railings | ||||||||
Satin 316 Stainless Steel | ||||||||
Straight | ||||||||
| 42" | 1 1/2" | 7/16" | Fasteners Not Included | 4'0" | 1 | 4 | 0000000 | 000000 |
Build-Your-Own Railings
Modular mix-and-match components allow flexible railing configurations.
Rails can be cut to length. The assembled length refers to the total installed length of the rail with posts on each side.
For technical drawings and 3-D models, click on a part number.
Railing Barriers
A hook on each end lets you join multiple barriers to create the length and configuration you need.
Stainless steel barriers offer excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
ADA-Compliant Railings
Make stairs and ramps safe and accessible for all with these ADA-compliant railings. They’re made of high-strength galvanized steel for durability and corrosion resistance, even outdoors. These railings are paintable and can be cut to length.
Ground-mount railings are supported by posts that mount to your staircase or ramp. They’re inline with the posts to give you space to navigate in narrow areas. Add an additional post for extra support if your railing extends beyond six ft.
Wall-mount railings are supported by brackets that mount to your wall. They’re commonly used for stairs or ramps that don’t have space for mounting posts. Because they’re offset with the wall, a portion of the grab bar juts out for easy access. Add another wall bracket for more support if your railing is longer than six ft.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||
|---|---|---|---|---|
| Number of | Diameter | Mounting Hardware | Each | |
Galvanized Steel | ||||
Inline | ||||
| 2 | 9/16" | Fasteners Not Included | 0000000 | 0000000 |
Mounting Holes | |||||
|---|---|---|---|---|---|
| Offset Depth | Number of | Diameter | Mounting Hardware | Each | |
Galvanized Steel | |||||
Offset | |||||
| 2 1/2" | 3 | 5/16" | Fasteners Not Included | 0000000 | 000000 |
Aluminum Slip-On Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
Fittings that meet UL 2703 are approved for use in solar rack mounting systems.
| For Rail OD | For Pipe Size | Includes | Specifications Met | Each | |
90° Elbow | |||||
|---|---|---|---|---|---|
Black Powder-Coated Aluminum | |||||
| 1 7/8" | 1 1/2 | Set Screws | __ | 0000000 | 000000 |
Adjustable-Angle Elbow | |||||
Black Powder-Coated Aluminum | |||||
| 1 7/8" | 1 1/2 | Set Screws | __ | 0000000 | 00000 |
Tee | |||||
Black Powder-Coated Aluminum | |||||
| 1 7/8" | 1 1/2 | Set Screws | UL 2703 | 0000000 | 00000 |
Three-Way 90° Elbow | |||||
Black Powder-Coated Aluminum | |||||
| 1 7/8" | 1 1/2 | Set Screws | __ | 0000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
Fittings that meet UL 2703 are approved for use in solar rack mounting systems.
| For Rail OD | For Pipe Size | No. of Through Holes | Includes | Specifications Met | Each | |
Four-Way 90° Elbow | ||||||
|---|---|---|---|---|---|---|
Black Powder-Coated Aluminum | ||||||
| 1 7/8" | 1 1/2 | 1 | Set Screws | __ | 0000000 | 000000 |
Tee | ||||||
Black Powder-Coated Aluminum | ||||||
| 1 7/8" | 1 1/2 | 1 | Set Screws | UL 2703 | 0000000 | 00000 |
Cross | ||||||
Black Powder-Coated Aluminum | ||||||
| 1 7/8" | 1 1/2 | 1 | Set Screws | __ | 0000000 | 00000 |
Adjustable-Angle Wye | ||||||
Black Powder-Coated Aluminum | ||||||
| 1 7/8" | 1 1/2 | 1 | Set Screws | UL 2703 | 0000000 | 00000 |
Rail ends attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings.
Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
Flange | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Rail OD | For Pipe Size | Dia. | Overall Ht. | No. of | Dia. | Mounting Fasteners Included | Includes | Each | |
Round | |||||||||
Black Powder-Coated Aluminum | |||||||||
| 1 7/8" | 1 1/2 | 4 1/2" | 2 5/16" | 4 | 7/16" | No | Set Screws | 0000000 | 000000 |
Through-hole fittings allow rails to run all the way through.
Rail supports secure long runs of railing.Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
Flange | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rail OD | For Pipe Size | Lg. | Wd. | Overall Ht. | No. of | Dia. | Mounting Fasteners Included | Includes | Each | |
Flush | ||||||||||
Black Powder-Coated Aluminum | ||||||||||
| 1 7/8" | 1 1/2 | 5" | 5" | 3" | 4 | 7/16" | No | Set Screws | 0000000 | 000000 |
Grab Bars
 |  Smooth |
 Textured |
Provide safety and support for users with limited mobility. Grab bars help you comply with ADA when properly installed.
For technical drawings and 3-D models, click on a part number.
| Bar Dia. | Lg. | Ht. | Projection | Mount. Orientation | Material | Mount. Flange Dia. | Mount. Hardware Included | Specifications Met | Each | |
Smooth | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Toilet Partition | ||||||||||
| 1 1/4" | 48" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 000000 |
| 1 1/2" | 48" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
Straight | ||||||||||
| 1 1/4" | 12" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 16" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 18" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 24" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 36" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 42" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/4" | 48" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 12" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 16" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 18" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 24" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 36" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 42" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
| 1 1/2" | 48" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 00000 |
Floor-to-Wall | ||||||||||
| 1 1/2" | __ | 33 1/2" | 30" | Left Hand | Stainless Steel | 3 1/4" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 000000 |
| 1 1/2" | __ | 33 1/2" | 30" | Right Hand | Stainless Steel | 3 1/4" | Yes | ADA Compliant, ANSI A117.1 | 0000000 | 000000 |
Textured | ||||||||||
Toilet Partition | ||||||||||
| 1 1/4" | 48" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 000000 |
| 1 1/2" | 48" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 000000 |
Straight | ||||||||||
| 1 1/4" | 12" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 16" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 18" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 24" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 36" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 42" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/4" | 48" | __ | 2 3/4" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 12" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 16" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 18" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 24" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 36" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 42" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
| 1 1/2" | 48" | __ | 3" | __ | Stainless Steel | 3" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 00000 |
Floor-to-Wall | ||||||||||
| 1 1/2" | __ | 33 1/2" | 30" | Left Hand | Stainless Steel | 3 1/4" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 000000 |
| 1 1/2" | __ | 33 1/2" | 30" | Right Hand | Stainless Steel | 3 1/4" | Yes | ADA Compliant, ANSI A117.1 | 00000000 | 000000 |