Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Insert these caps into a cam-and-groove socket to protect the end of the coupling from damage. The attached handle allows you to easily maneuver hose.

Kits contain Industrial quick-disconnect plugs in four coupling sizes so you can determine the size of your couplings without needing to measure.

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Compatible with Lincoln-shape plugs and sockets.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO A-shape plugs and sockets.

Add quick connection points for mechanical gauges and other diagnostic equipment to your line. These couplings are also known as test ports and diagnostic couplings.

Ideal for lines with rapid changes in pressure and flow, these couplings have threads that lock them together. They connect more securely than push-to-connect couplings, whose bearings wear out in high-impulse conditions.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

A cap, bumper, and handle in one. Not only do these fittings seal your food or beverage line, they extend past the socket’s levers, so they take the brunt of damage from bumps and drops.

Couplings are compatible with quick-disconnect Plastic-shape plugs and sockets. They are designed for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 100 psi.

With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.

Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.

Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Made of platinum-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.

Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.

The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.