Rounded Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet-mount nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Slotted  | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.15" to 0.2" | 0.438" | 0.39" | 0.625" | 0.13" | 0.85" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.2" to 0.25" | 0.438" | 0.39" | 0.625" | 0.13" | 0.9" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 0.625" | 0.13" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 0.625" | 0.13" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Phillips | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet these nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.88" | 0.44" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.88" | 0.44" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.88" | 0.44" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.88" | 0.44" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.88" | 0.44" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.88" | 0.44" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.25" to 0.3" | 0.438" | 0.39" | 1.1" | 0.43" | 0.95" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 1.1" | 0.43" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 1.1" | 0.43" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Front Press-Fit Nut
Press these nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating to resist corrosion in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Inner Panel | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Installation Thick. | Min. Thick. | Hole Dia. | For Min. Space Between Panels | Wd. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.03"-0.05" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.48" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Front Press-Fit Nut
Press these nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating to resist corrosion in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Inner Panel | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Installation Thick. | Min. Thick. | Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Slotted | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.03"-0.05" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.48" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Phillips | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Back Press-Fit Nut
Press these nuts into the backside of a panel in applications where you have access to both sides of the panel. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating that provides corrosion resistance in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total | Min. Inner | For Inner Panel Hole Dia. | For Min. Space Between Panels | Wd. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.07" to 0.09" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.48" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09" to 0.11" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.5" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11" to 0.13" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.52" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.13" to 0.15" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.54" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.15" to 0.17" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.56" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Back Press-Fit Nut
Press these nuts into the backside of a panel in applications where you have access to both sides of the panel. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating that provides corrosion resistance in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total | Min. Inner | For Inner Panel Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Slotted | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.11" to 0.13" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.52" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.13" to 0.15" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.54" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.15" to 0.17" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.56" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Phillips | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09" to 0.11" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.5" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Clip-On Nut
The nut clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner | Total | For Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temperature Range, °F | Color | Each | |
Slotted | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.026" | 0.375" | 0.09" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.026" | 0.375" | 0.09" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.026" | 0.375" | 0.09" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.026" | 0.375" | 0.09" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.026" | 0.375" | 0.09" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.026" | 0.375" | 0.09" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.03" to 0.09" | 0.19" to 0.24" | 0.512" | 0.04" | 0.625" | 0.13" | 0.85" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.24" to 0.29" | 0.512" | 0.04" | 0.625" | 0.13" | 0.9" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 0.04" | 0.625" | 0.13" | 1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 0.04" | 0.625" | 0.13" | 1.1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Phillips | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.026" | 0.375" | 0.09" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.026" | 0.375" | 0.09" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.026" | 0.375" | 0.09" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.026" | 0.375" | 0.09" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.026" | 0.375" | 0.09" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.026" | 0.375" | 0.09" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Clip-On Nut
A clip-on nut allows you to mount the screw near the edge of a thin panel. Lock and release access panels, doors, and covers with a quarter-turn. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner | Total | For Hole Dia. | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temperature Range, °F | Color | Each | |
Zinc-Plated Steel | ||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.88" | 0.44" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.88" | 0.44" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.88" | 0.44" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.88" | 0.44" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.88" | 0.44" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.88" | 0.44" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | ||||||||||||
| 0.03" to 0.09" | 0.29" to 0.34" | 0.512" | 1.1" | 0.43" | 0.95" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 1.1" | 0.43" | 1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 1.1" | 0.43" | 1.1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Twist-to-Lock Press-Fit Captive-Panel Retractable Spring Plungers
Lock the nose in the retracted position by pulling the knob and rotating it 90°. Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Dia. | Lg. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.249" | 0.32" | Nickel-Plated Steel | 000000000 | 00000 |
Press-Fit Captive-Panel Retractable Spring Plungers
Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Pull the knob to withdraw the pin from inner panel. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.32" | 0.249" | Nickel-Plated Steel | 000000000 | 00000 |
Twist-to-Lock Thread-In Captive-Panel Retractable Spring Plungers
Lock the nose in the retracted position by pulling the knob and rotating it 90°. Insert the nose into a panel; then thread on the nut and tighten using an installation wrench (sold separately). These spring plungers have a spring-loaded pin that retracts to release sliding parts. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Spring Plungers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia. | Body | Nose | Installation Wrenches | ||||||||
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | |||||||||||
| 0.025" to 0.06" | 0.281" | 0.188" | 0.53" | 0.53" | 0.25" | 0.183" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 000000 |
| 0.031" to 0.125" | 0.359" | 0.25" | 0.69" | 0.72" | 0.31" | 0.245" | 6262 Aluminum | 000000000 | 0000 | 000000000 | 00000 |
Thread-In Captive-Panel Retractable Spring Plungers
Insert the nose into a panel; then thread on the nut and tighten using an installation wrench (sold separately). These spring plungers have a spring-loaded pin that retracts to release sliding parts. Pull the knob to retract the nose. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Spring Plungers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia. | Body | Nose | Installation Wrenches | ||||||||
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | |||||||||||
| 0.025" to 0.06" | 0.281" | 0.188" | 0.53" | 0.53" | 0.25" | 0.183" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 000000 |
| 0.031" to 0.125" | 0.359" | 0.25" | 0.69" | 0.72" | 0.31" | 0.245" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 00000 |
Turn-Button Fastener Bases
Mount one of these bases to a solid surface with screws, insert the button through an eyelet (sold separately) and give it a quarter turn to secure.
Double-stud bases are taller than single-stud bases, so they can secure thicker materials. They also have a stainless steel pin and spring for a tighter and longer-lasting hold.
For technical drawings and 3-D models, click on a part number.
Bases | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Eyelets | |||||||||||||
| Base Style | Lg. | Wd. | Height | Mounting Fasteners Included | For Mounting Screw Size | Center-to-Center | No. of | Features | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Nickel-Plated Brass | ||||||||||||||
| Single Stud | 1 1/4" | 1/2" | 11/16" | No | No. 6 | 7/8" | 2 | __ | 5 | 000000000 | 000000 | 5 | 000000000 | 00000 |
| Double Stud | 1 1/4" | 1/2" | 7/8" | No | No. 8 | 7/8" | 2 | Stainless Steel Pin and Spring | 5 | 000000000 | 00000 | 5 | 000000000 | 0000 |
Turn-Button Fastener Eyelets
Create an eyelet for turn-button fastener bases. Cut the fabric using a cutting punch (sold separately), push the eyelet prongs through the fabric, and crimp the prongs over the washer on the opposite side.
For technical drawings and 3-D models, click on a part number.
Turn-Button Fastener Bases with Threaded Stud
Drive the threaded stud into a solid surface using a hand driver, insert the button through an eyelet, and give it a quarter turn to secure. Hand driver and eyelets are sold separately.
For technical drawings and 3-D models, click on a part number.