Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

Designed for use in 1/4" or 1/2" dia. through holes.

Secure cabinet doors and other fixtures that have smaller-than-standard-diameter through holes. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.

Trigger a light, alarm, or other device to signal your door is unlocked.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and other fixtures.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.

Secure cabinet doors and file drawers that have smaller than standard-diameter through holes. Offering more security than standard keyed cam locks, these have circular keys that are difficult to duplicate.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw.

Designed for smaller-than-standard-diameter through holes, these locks are often used for securing cabinet doors and filing cabinet drawers.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

A gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants.

Quickly snap these locks into a through-hole cutout—there’s no need to fasten them with a screw. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

A gasket stops water from getting past these locks during high-pressure, high-temperature washdowns common in food processing plants. They lock with a hex key, so they’re great if you don’t want to keep a complicated keying system.

Install these locks in smaller-than-standard diameter through holes to secure enclosure doors and file drawers. They open with a hex key, so they’re great for a facility where you don’t need a complicated keying system.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a female hex key (sold separately), so they match a keying system that’s common for industrial enclosures and other machinery but are more secure than locks that open with a male hex key or screwdriver.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

An gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs.

Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.

Trigger a light, alarm, or other device to signal your door is unlocked.

An O-ring keeps water from entering through the lock during high-temperature, high-pressure washdowns. This helps you maintain an IP69K rating on sealed enclosures, such as those found in food processing plants.

Quickly snap these locks into a through-hole cutout—no need to fasten them with a screw. These locks open with a two-way key, also called a double-bit key. This means they match a keying system that’s common for industrial enclosures, but they’re more secure than locks that open with a hex key or screwdriver.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.

Open each of these locks with a different key.

For a simplified keying system, these cam locks open and close with a slotted screwdriver. Also called quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal.

Choose these locks if you need each one to open with a different key.

With a molded inset grip, the handle remains recessed to stay out of the way.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down into the recess to create compression and minimize rattling from vibration. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Stop burglars from breaking in with saws, screwdrivers, pliers, and other common tools—these locks meet RC2 security standards. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Designed for smaller-than-standard through holes, these latches are often used for securing doors and drawers.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.

Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. A gasket helps keep dust and low-pressure washdowns from entering through the latch. It’s harder to snag straps and other items on these latches than on T- or L-handle latches.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Prevent water, dirt, and dust from getting into your cabinets and file drawers through the latch during low-pressure washdowns.

The T-handle lays flush in the recess, so you won’t bump into or catch your clothes on these latches. Also called quarter-turn latches, they have a cam that rotates 90° to secure enclosures.

Fold the handle into the recess to stay out of the way when not in use. Also known as compression cam latches, they create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

With a finger-grip knob, these latches fit where latches with handles won't.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.

Often installed on sealed server cabinets and electrical panels, these latches have a gasket that prevents water, dust, and dirt from getting through the latch. Lift their handle and it swings smoothly to latch and unlatch the door.

To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Add a padlock for extra security.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

A slotted screwdriver opens and closes these locks, so you can avoid a complicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on server cabinets and electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Secure these latches with a padlock.

To fit in tight areas, these latches have a knob instead of a handle. Add a padlock for extra security.

More secure than locks that open with a hex or slotted driver, these locks open with a square key. Add a padlock for extra security.

Set a combination and reset it at any time.

Secure these locks with a three-number combination or a key. Often used on sealed server cabinets and electrical panels, they have a gasket that keeps low-pressure washdowns and dust from getting through the lock.