About Heat-Shrink Tubing
More
High-Strength Heat-Shrink Tubing
With excellent durability and chemical resistance, this tubing withstands demanding use.
PVDF tubing resists cuts from being dragged over rough surfaces, along with tears from stretching or flexing. It has an additive that makes it flame retardant, so it resists combustion and minimizes the spread of flames.
SAE AMS-DTL-23053/8 tubing meets requirements for material quality.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: See Table
- Temperature Range: -65° to 345° F
- Specifications Met: See Table
ID | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Shrink Temp., °F | Specifications Met | Color | Clarity | Each | |
1/2 ft. Lg. | |||||||||
| 0.13" | 0.06" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 0.25" | 0.13" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 0000 |
| 0.38" | 0.19" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 0000 |
| 0.75" | 0.38" | 0.02" | 595 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 0000 |
| 1" | 0.5" | 0.02" | 595 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 0000 |
4 ft. Lg. | |||||||||
| 0.05" | 0.023" | 0.007" | 800 V/mil | 300° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1 | Clear | Semi-Clear | 00000000 | 0000 |
| 0.06" | 0.03" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 0.13" | 0.06" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 0000 |
| 0.25" | 0.13" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 0.38" | 0.19" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 0.5" | 0.25" | 0.01" | 800 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | 595 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | 595 V/mil | 335° | SAE AMS-DTL-23053/8, UL Recognized Component, UL 224 VW-1, CSA Certified | Clear | Clear | 0000000 | 00000 |
Flame-Retardant Abrasion-Resistant Heat-Shrink Tubing
- Material: PVDF Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 400 V/mil
- Shrink Temperature: 305° F
- Temperature Range: -65° to 300° F
- Specifications Met: UL Recognized Component, SAE AMS-DTL-23053/18 Class 2, UL 2556 VW-1
Made of PVDF, this tubing has excellent cut and abrasion resistance. A flame-retardant additive makes it combustion resistant and minimizes the spread of flames. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Tubing meets SAE AMS-DTL-23053/18 Class 2 for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Choose a Color | Pkg. Qty. | Pkg. | Each | ||
| 0.19" | 0.09" | 0.01" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
| 0.25" | 0.13" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.38" | 0.19" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.5" | 0.25" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 00000 |
| 0.75" | 0.38" | 0.02" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 0.5" | 0.02" | Black, Clear | 1 | 0000000 | 0000 | 0000000 | 00000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |
| 0.13"-1" ID Before Shrinking of Polyolefin (22 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive (31 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of PVDF (20 pieces, 7 sizes) | 73 | 1/2ft. | 2:1, 3:1 | 250° | Black, Clear, Red | 0000000 | 000000 |
| 0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes) | 150 | 1/2ft. | 2:1 | 195° to 350° | Black, Clear | 000000 | 000000 |