About Sleeving
More
About Heat-Shrink Tubing
More
Chemical-Resistant Heat-Shrink Tubing
![](/prerenderstable/mvPRE/contents/gfx/imagecache/713/7132k77-@halfx_636736729348372142.png?ver=imagenotfound)
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
SAE AMS-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | 1/2 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | Pkg. Qty. | Pkg. | |
0.05" | 0.02" | 0.02" | 1,000 V/mil | 5 | 00000000 | 00000 | |
0.06" | 0.03" | 0.02" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.13" | 0.06" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.19" | 0.09" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.25" | 0.13" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.38" | 0.19" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.5" | 0.25" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.63" | 0.31" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.75" | 0.38" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
1" | 0.5" | 0.04" | 1,000 V/mil | 5 | 00000000 | 0000 | |
1.5" | 0.75" | 0.04" | 1,000 V/mil | 5 | 00000000 | 00000 | |
2" | 1" | 0.05" | 1,000 V/mil | 5 | 00000000 | 00000 | |
3" | 1.5" | 0.07" | 1,000 V/mil | 5 | 00000000 | 00000 | |
4" | 2" | 0.07" | 1,000 V/mil | 3 | 00000000 | 00000 |
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | 5 ft. Lg. | 10 ft. Lg. | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 125 ft. Lg. | 250 ft. Lg. | |
0.05" | 0.02" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
0.06" | 0.03" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
0.13" | 0.06" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.19" | 0.09" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.25" | 0.13" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.38" | 0.19" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.5" | 0.25" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.63" | 0.31" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.75" | 0.38" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
1" | 0.5" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
1.5" | 0.75" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
2" | 1" | 0.05" | 1,000 V/mil | 00000000 | ||||||||
3" | 1.5" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
4" | 2" | 0.07" | 1,000 V/mil | 00000000 |
Tight-Fit Chemical-Resistant Heat-Shrink Tubing
![](/prerenderstable/mvPRE/contents/gfx/imagecache/674/6745k25-@halfx_636904893804723473.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/990/9902t16-@halfx_636736739004990043.png?ver=imagenotfound)
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 285° F
- Temperature Range: 0° to 210° F
- Specifications Met: UL 2556 VW-1, UL Recognized Component
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. Made of PVC, it has excellent resistance to chemicals, oil, and acids. It also resists UV, so it won't fade or discolor when exposed to sunlight. All are flame rated VW-1, so this tubing meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 25 ft. Lg. | 100 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
0.48" | 0.26" | 0.004" | White | 0000000 | 00000 | 0000000 | 000000 |
0.6" | 0.33" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
0.85" | 0.47" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
0.91" | 0.5" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.04" | 0.57" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.13" | 0.62" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.2" | 0.66" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.45" | 0.8" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
1.6" | 0.88" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
Chemical-Resistant Moisture-Seal Heat-Shrink Tubing
![](/prerenderstable/mvPRE/contents/gfx/imagecache/819/8195k25-@halfx_636736738911857446.png?ver=imagenotfound)
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 1,000 V/mil
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
Made of PVC, this tubing resists chemicals, oil, and solvents. An adhesive lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. It resists UV, so it won’t fade or discolor when exposed to sunlight.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 25 ft. Lg. | 100 ft. Lg. | |||||||
---|---|---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Pkg. Qty. | Pkg. | Each | Each | |||
0.19" | 0.09" | 0.04" | Black | 5 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
0.25" | 0.13" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
0.38" | 0.19" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
0.5" | 0.25" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
0.75" | 0.38" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
1" | 0.5" | 0.05" | Black | 5 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
Polyester/rubber tubing is chemical resistant.
Neoprene rubber tubing resists chemicals, oil, and acids.
Viton® fluoroelastomer rubber tubing resists chemicals, oil, acids, and abrasion.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/806/8061k3p1-d01b-digital@halfx_635887284990000000.png?ver=imagenotfound)
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
Includes | Number of Pieces | Lg., ft. | Color | Each | |
0.09"-0.38" ID Before Shrinking of PVC (5 sizes) | 175 | 1/2 | Black | 000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/806/8061k7-@halfx_636736737246858773.png?ver=imagenotfound)
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
Mounting | ||||||||
---|---|---|---|---|---|---|---|---|
Includes | Number of Spools | Type | No. of Holes | Hole Dia. | Fasteners Included | Color | Each | |
0.06" ID Before Shrinking of PVC (100 feet) 0.13", 0.19", 0.25", 0.38" ID Before Shrinking of PVC (25 feet each) | 5 | Screw On | 2 | 1/4" | No | Black | 000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/749/7496k21-@halfx_636736731687763138.png?ver=imagenotfound)
Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Features | Color | Each | |
0.06"-0.75" ID Before Shrinking of PVC (6 sizes) | 100 | 1/2ft. | 2:1 | 215° | Chemical Resistant, UV Resistant | Black | 000000 | 000000 |
0.19-0.75" ID Before Shrinking of Polyester/Rubber Blend (5 pieces, 5 sizes) 0.19-0.75" ID Before Shrinking of Neoprene (5 pieces, 5 sizes) 0.19-0.75" ID Before Shrinking of Viton® Fluroelastomer Rubber (5 pieces, 5 sizes) | 15 | 2" | 2:1 | 250° to 350° | Chemical Resistant | Black | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/806/8061k4p1-d01b-digital@halfx_635887434070000000.png?ver=imagenotfound)
Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |
0.13"-1" ID Before Shrinking of Polyolefin (22 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive (31 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of PVDF (20 pieces, 7 sizes) | 73 | 1/2ft. | 2:1, 3:1 | 250° | Black, Clear, Red | 0000000 | 000000 |
0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes) | 150 | 1/2ft. | 2:1 | 195° to 350° | Black, Clear | 000000 | 000000 |
0.13"-0.75" ID Before Shrinking of Polyolefin with Adhesive Lining (58 pieces, 6 sizes) | 58 | 6" | 3:1 | 160° to 250° | Black | 00000000 | 00000 |
0.16"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (27 pieces, 6 sizes) | 27 | 6" | 4:1 | 215° to 300° | Black | 00000000 | 00000 |
0.5"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (42 pieces, 3 sizes) | 42 | 6" | 3:1 | 250° | Black, Red | 00000000 | 000000 |
Continuous-Flex Wrap-Around Sleeving
Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying. It can even be used over cable and hose carriers for an added layer of protection. This sleeving opens along its entire length, so there’s no need to disconnect lines or use tools for maintenance such as adding or removing cable.
PVC fabric sleeving has a chemical-resistant polyester coating, so it’s commonly used to protect wire in areas where painting or sealing takes place. A hook-and-loop closure allows access for maintenance at any point. Elastic on both ends holds sleeving in place.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/583/5830n103-@halfx_637413934460492670.png?ver=imagenotfound)
Temperature Range, °F | 3 ft. Lg. | 6 1/2 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
For Carrier OD | Min. | Max. | Color | Each | Each | ||
1.69" / 43 mm | -20° | 100° | White | 00000000 | 000000 | 00000000 | 0000000 |
2.13" / 54 mm | -20° | 100° | White | 00000000 | 00000 | 00000000 | 000000 |
2.56" / 65 mm | -20° | 100° | White | 00000000 | 000000 | 00000000 | 000000 |
2.76" / 70.2 mm | -20° | 100° | White | 00000000 | 00000 | 00000000 | 000000 |
3.19" / 81 mm | -20° | 100° | White | 00000000 | 000000 | 0000000 | 000000 |
3.72" / 94.5 mm | -20° | 100° | White | 00000000 | 000000 | 00000000 | 000000 |
4.5" / 108 mm | -20° | 100° | White | 00000000 | 000000 | 00000000 | 000000 |
5.31" / 135 mm | -20° | 100° | White | 00000000 | 000000 | 00000000 | 000000 |