About Heat-Shrink Tubing
More
Chemical-Resistant Heat-Shrink Tubing
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
SAE AMS-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | |||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | Pkg. Qty. | Pkg. | |
1/2 ft. Lg. | |||||||
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 1" | 0.5" | 0.04" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 2" | 1" | 0.05" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 3" | 1.5" | 0.07" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 4" | 2" | 0.07" | 1,000 V/mil | 3 | 00000000 | 00000 | |
1 ft. Lg. | |||||||
| 0.63" | 0.31" | 0.03" | Not Rated | 5 | 0000000 | 0000 | |
| 0.75" | 0.38" | 0.03" | Not Rated | 5 | 0000000 | 0000 | |
| 1" | 0.5" | 0.04" | Not Rated | 5 | 0000000 | 0000 | |
| 1.5" | 0.75" | 0.04" | Not Rated | 5 | 0000000 | 00000 | |
| 2" | 1" | 0.05" | Not Rated | 3 | 0000000 | 00000 | |
| 3" | 1.5" | 0.07" | Not Rated | 1 | 0000000 | 0000 | |
| 4" | 2" | 0.07" | Not Rated | 1 | 0000000 | 00000 | |
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | 5 ft. Lg. | 10 ft. Lg. | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 125 ft. Lg. | 250 ft. Lg. | |
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.63" | 0.31" | 0.03" | Not Rated | 00000000 | ||||||||
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.75" | 0.38" | 0.03" | Not Rated | 00000000 | ||||||||
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 1" | 0.5" | 0.04" | Not Rated | 00000000 | ||||||||
| 1" | 0.5" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
| 1.5" | 0.75" | 0.04" | Not Rated | 00000000 | ||||||||
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
| 2" | 1" | 0.05" | Not Rated | 00000000 | ||||||||
| 2" | 1" | 0.05" | 1,000 V/mil | 00000000 | ||||||||
| 3" | 1.5" | 0.07" | Not Rated | 00000000 | ||||||||
| 3" | 1.5" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
| 4" | 2" | 0.07" | Not Rated | 00000000 | ||||||||
| 4" | 2" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
| 5" | 2.5" | 0.08" | Not Rated | 00000000 | ||||||||
Tight-Fit Chemical-Resistant Heat-Shrink Tubing
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 285° F
- Temperature Range: 0° to 210° F
- Specifications Met: UL 2556 VW-1, UL Recognized Component
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. Made of PVC, it has excellent resistance to chemicals, oil, and acids. It also resists UV, so it won't fade or discolor when exposed to sunlight. All are flame rated VW-1, so this tubing meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 25 ft. Lg. | 100 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
| 0.48" | 0.26" | 0.004" | White | 0000000 | 00000 | 0000000 | 000000 |
| 0.6" | 0.33" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 0.85" | 0.47" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 0.91" | 0.5" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.04" | 0.57" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.13" | 0.62" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.2" | 0.66" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.45" | 0.8" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
| 1.6" | 0.88" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
Chemical-Resistant Moisture-Seal Heat-Shrink Tubing
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 1,000 V/mil
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
Made of PVC, this tubing resists chemicals, oil, and solvents. An adhesive lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. It resists UV, so it won’t fade or discolor when exposed to sunlight.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 25 ft. Lg. | 100 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Pkg. Qty. | Pkg. | Each | Each | |||
| 0.19" | 0.09" | 0.04" | Black | 5 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 0.13" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.38" | 0.19" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.5" | 0.25" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.75" | 0.38" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 1" | 0.5" | 0.05" | Black | 5 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
| Includes | Number of Pieces | Lg., ft. | Color | Each | |
| 0.09"-0.38" ID Before Shrinking of PVC (5 sizes) | 175 | 1/2 | Black | 000000 | 000000 |
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|
| Includes | Number of Spools | Type | No. of Holes | Hole Dia. | Fasteners Included | Color | Each | |
| 0.06" ID Before Shrinking of PVC (100 feet) 0.13", 0.19", 0.25", 0.38" ID Before Shrinking of PVC (25 feet each) | 5 | Screw On | 2 | 1/4" | No | Black | 000000 | 0000000 |
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Features | Color | Each | |
| 0.06"-0.75" ID Before Shrinking of PVC (6 sizes) | 100 | 1/2ft. | 2:1 | 215° | Chemical Resistant, UV Resistant | Black | 000000 | 000000 |
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |
| 0.13"-0.5" ID Before Shrinking of Polyolefin with Adhesive Lining (5 sizes) 0.13"-0.5" ID Before Shrinking of PVC (5 sizes) 0.13"-0.5" ID Before Shrinking of PVDF (5 sizes) | 150 | 1/2ft. | 2:1 | 195° to 350° | Black, Clear | 000000 | 000000 |