Switches immediately cut power with a single push. Use these switches where ignitable gas and dust may be present. Their contact blocks are explosion proof and UL listed for Class I, Division 2, Groups B, C, and D hazardous locations. All are rated NEMA 4X and IP65 for protection from corrosion and washdowns. They include enough contact blocks to control the number of circuits listed.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 4X and 13, these switches resist corrosion, washdowns, and oil/coolant spraying. They include enough contact blocks to control the number of circuits listed. Use legend plates (not included) to label switches.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

A quick push is all it takes to actuate these simple switches. Mount them in a standard panel cutout diameter. The contact block is rated IP20. Switches include enough contact blocks to control the number of circuits listed. For an easy way to tell different switches apart, choose a different actuator color for each or label them with legend plates (not included).

Illuminated switches are easy to see in dim and dark areas.

NEMA and IP rated, all switches seal out dust, water from washdowns, and splashing oil or coolant. NEMA 3S rated switches function in cold temperatures, even when covered in ice. IP69K rated switches are protected from high-pressure washdowns.

Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

Mounting tools (sold separately) make it easier to install switches in crowded panels.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Push button is rated NEMA 13 for protection against dust, corrosion, and oil/coolant spraying. The clamp ring at the base of the button is rated NEMA 4 or 4X for protection against dirt and washdowns.

Add up to three contact blocks (sold separately) to control a maximum of eight circuits.

For technical drawings and 3-D models, click on a part number.

Immediately cut power with a single push. These switches meet EN 418 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. They include enough contact blocks to control the number of circuits listed.

Pull reset, illuminated pull reset, and turn reset switches are rated NEMA 4, 13, and IP66. Contact blocks for these switches are rated IP20.

Note: Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

Pull reset switches with lockout latch when you depress the button, and can be locked in that position using a padlock with a max. 3/16" shackle diameter. Switches are rated NEMA 13 and IP65.

For technical drawings and 3-D models, click on a part number.

Immediately cut power with a single push. These switches meet EN 418 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. They're rated IP66, IP69K, NEMA 3S, NEMA 4X, and NEMA 13, and are UL and C-UL Recognized Components. Switches include enough contact blocks to control the number of circuits listed. Contact blocks are rated IP20 and are UL and C-UL Listed.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying. Housed in a yellow enclosure for quick identification, they immediately cut power with a single push. They meet EN 60947-5-1 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. UL listed and CSA certified, they also meet American and Canadian safety standards. The front of these switches is UL recognized.

Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying. Housed in a yellow enclosure for quick identification, they immediately cut power with a single push. They meet EN 418 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick.

Switches with a power indicator alert you from the front and sides when the switch has been actuated.

Switches with a guard prevent accidental actuation. For extra security, lock the button in the off position with a padlock (not included) to stop these switches from being reset or turned on during machine repairs.

For technical drawings and 3-D models, click on a part number.

Choose an actuator and contact block to make your own switch. All switches are rated for protection from washdowns and oil/coolant spraying. NEMA 4X rated switches are also protected from corrosion. Use legend plates (not included) to label switches.

Switch guards protect flush and projecting switches from accidental activation.

For technical drawings and 3-D models, click on a part number.