Filter by
DFARS Compliance
How to Prime Your Pump
More
How to Determine Feet of Head
More
About Process Pumps
More
High-Pressure Metering Pumps for Chemicals with Locking Lever
An adjustment dial with a locking lever allows for easy flow control. Also known as diaphragm metering pumps, these can be used with pressures up to four times higher than standard chemical metering pumps. They're often used for general purpose dispensing of chemicals such as ammonia and acid-washing solutions. The adjustment dial alters flow rate in 5% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. Do not run dry or use with solids.
Repair kits include a pump head assembly, valves, a diaphragm, and mounting hardware.
Intake | Discharge | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gal./day | Max. Pressure, psi | Max. Viscosity, cP | Temp. Range, °F | Horsepower | Current, A  | Tube ID | Tube OD | Tube Lg., ft. | Tube ID | Tube OD | Tube Lg., ft. | Lg. | Wd. | Ht. | Each | |
120V AC, Single Phase—Without Thermal Overload Protection | ||||||||||||||||
Plug | ||||||||||||||||
| 0.3-3 | 100 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 0000000 |
| 0.7-7 | 100 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 000000 |
| 1.5-15 | 100 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 000000 |
| 2.4-24 | 100 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 000000 |
| 3-30 | 100 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 000000 |
| 10-100 | 60 | 300 | 35° to 125° | 1/60 hp | 1 | 5/16" | 7/16" | 4 | 3/8" | 1/2" | 8 | 8 7/8" | 7 1/4" | 6 3/4" | 0000000 | 000000 |
| Repair Kit | 0000000 | Each | 0000000 |