We will reply to your message within an hour.
An extended spring on these seals accommodates variations in seal cavity length and pump misalignment.
With a smaller seal OD than standards seals, these seals have an extended spring that accommodates variations in seal cavity length.
These seals are commonly used in well, sump, and displacement pumps.
Built for small circulation and dispensing pumps, these seals have short springs.
Multiple internal springs ensure these seals keep the sealing surfaces in contact in demanding applications, such as agricultural, chemical, and mining pumps.
Also known as oil seals, use these to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes. A spring secures the lip against the shaft, preventing messy leaks. Press-fit seals into the bore around the shaft.
Install these seals faster and with less technical expertise than other mechanical shaft seals that come in two pieces. They come with their seal and seat already assembled.
Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.
These lubricated PTFE fiber seals stand up to most chemicals. Use them in pumps and valves.
Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.
Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners.
Made of ePTFE with a graphite filler and reinforced by Aramid, these seals combine heat protection with chemical and abrasion resistance.
Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds.
Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps.
Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.
The most abrasion resistant of all our packing seals, these are made of PTFE-impregnated aramid fiber that has been saturated in a lubricant. They are for use in pumps.
Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.
Since they require lighter packing pressure than standard oil- and water-resistant packing seals, these seals cause less friction and reduce shaft wear. They are for use in pumps and valves.
Offering excellent flexibility, these seals are made of expanded graphite yarn. Use them for steam applications in pumps and valves.
Use these graphite-impregnated graphite seals for steam applications in pumps and valves.
Made of graphite-impregnated carbon, these steam-resistant seals dissipate heat from the shaft to protect pumps and valves when operating at high speeds.
Made of flax fiber, these seals are excellent for marine applications since they resist salt water.
These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.
For use in valves and pumps, this thin, flexible tape is made from high-purity graphite with no fibers or binders that could contaminate your process line.
Install between layers of packing seals to ensure lubricants are distributed evenly. These lubricating rings are also known as lantern rings.
Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves.
Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.
Safely use these balls in food and pharmaceutical environments to clean screens in vibrating sifters or to act as a seal in pumps and check valves.
Use these polyurethane balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. They are made of polyurethane, which combines the shock absorbing qualities of rubber with the strength of plastic.
FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.
Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves.
Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.
Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner.