About Pulleys
More
Mounted Pulleys for Wire Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Single-Groove Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 2" | 1" | 3 1/4" | 2 1/2" | Steel | Steel | 2 | 1/4" | 2 1/4" | __ | 0000000 | 000000 |
| 1 | 3/8" | Not Rated | 3" | 1 5/32" | 4 3/4" | 3 1/2" | Steel | Steel | 2 | 1/4" | 3 5/8" | __ | 0000000 | 00000 |
| 2 | 3/16" | Not Rated | 2 1/2" | 1 3/32" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 3/16" | 7/16" | 0000000 | 00000 |
| 2 | 1/4" | Not Rated | 3 1/4" | 1 7/16" | 4 3/4" | 3 3/8" | Steel | Steel | 4 | 1/4" | 4 1/8" | 13/16" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 4 1/2" | 1 5/8" | 6 5/16" | 4 3/4" | Steel | Steel | 4 | 1/4" | 5 1/2" | 13/16" | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 2" | 7/8" | 4 1/8" | 2 5/16" | Steel | Steel | 4 | 1/4" | 3 7/16" | 13/16" | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 3" | 1 1/8" | 5 9/16" | 3 11/32" | Steel | Steel | 4 | 1/4" | 4 3/4" | 1 1/16" | 0000000 | 00000 |
| 4 | 3/16" | Not Rated | 2 1/2" | 15/16" | 4" | 2 1/2" | Steel | Steel | 4 | 3/16" | 3 1/2" | 9/16" | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 3 1/4" | 1 1/16" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 3/8" | 13/16" | 0000000 | 00000 |
| 4 | 3/8" | Not Rated | 4 1/2" | 1 1/8" | 7" | 4 1/2" | Steel | Steel | 4 | 1/4" | 6 1/4" | 3/4" | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
| 5 | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 1 3/4" | Steel | Stainless Steel | 3 | 3/16" | __ | __ | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
| 6 | 3/16" | Not Rated | 2 1/2" | 1 7/16" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 1/4" | 7/8" | 0000000 | 00000 |
| 6 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/2" | Steel | Steel | 4 | 1/4" | 4 1/8" | 1 1/16" | 0000000 | 00000 |
| 7 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 7/16" | 3/4" | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove With Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Carabiner | ||||||||||||
| C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 0000000 |
Mounted Pulleys for Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
With Ball Bearing | ||||||||||||||
| 7 | 3/8" | 1,100 | 2 3/16" | 15/16" | 3 1/8" | 2 13/16" | Nylon Plastic | Nylon Plastic | 2 | 1/4" | 2 3/16" | __ | 0000000 | 000000 |
Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Bronze | Bronze | 2 | 5/32" | 1 3/8" | __ | 0000000 | 00000 |
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Steel | Steel | 2 | 5/32" | 1 3/8" | __ | 000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Bronze | Bronze | 4 | 17/64" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Steel | Steel | 4 | 17/64" | 1 3/8" | 1 3/4" | 000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 1/8" | 13/16" | Steel | Steel | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 3/16" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 3/4" | 3 5/8" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 13/16" | 3 9/16" | 13/16" | Steel | Steel | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 1 1/2" | 1" | 3 11/16" | 1" | Steel | Steel | 2 | 3/16" | 3" | __ | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 1" | 1 5/8" | 1 5/8" | 3 1/2" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 5/16" | Not Rated | 1 1/4" | 1 5/8" | 1 5/8" | 4 5/16" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 3/8" | Not Rated | 1 1/2" | 2 3/16" | 2 3/16" | 4 5/8" | Iron | Iron | 4 | 1/4" | 1 3/16" | 1 3/16" | 000000 | 00000 |
| 5 | 3/8" | Not Rated | 1 1/2" | 7/8" | 2 15/16" | 2 1/16" | Steel | Steel | 2 | 15/64" | 2 1/8" | __ | 000000 | 00000 |
| 5 | 5/8" | Not Rated | 2 1/2" | 1 1/4" | 4 5/8" | 3 5/16" | Steel | Steel | 2 | 9/32" | 3 1/2" | __ | 000000 | 00000 |
| 6 | 5/16" | Not Rated | 1 3/8" | 7/8" | 2 9/16" | 1 13/16" | Steel | Steel | 2 | 13/64" | 1 13/16" | __ | 000000 | 0000 |
| 6 | 1/2" | Not Rated | 2" | 1 1/16" | 3 1/2" | 2 5/8" | Steel | Steel | 2 | 15/64" | 2 5/8" | __ | 000000 | 00000 |
| 8 | 1/2" | 1,750 | 2" | 7/8" | 2 3/4" | 2 1/2" | Nylon Plastic | Stainless Steel | 2 | 1/4" | 2 3/16" | __ | 0000000 | 00000 |
Mounted Pulleys for Wire Rope—For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant than steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||||
| 1 | 3/16" | 600 | 2" | 5/8" | 2" | 2 3/8" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 000000 |
| 1 | 1/4" | 800 | 3" | 5/8" | 3" | 3 9/16" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 00000 |
| 1 | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 0000000 | 00000 |
| 1 | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
| 2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Stainless Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 0000000 | 000000 |
| 2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 00000000 | 000000 |
| 2 | 3/8" | 7,000 | 6" | 6 3/4" | 6" | 6 1/2" | Steel | 4 | 1/2" | 3 1/4" | 4 13/16" | ASME B30.26 | 00000000 | 000000 |
| 2 | 1/2" | 10,500 | 8" | 8 7/8" | 8" | 8 3/8" | Steel | 4 | 11/16" | 4 1/2" | 5 15/16" | ASME B30.26 | 00000000 | 000000 |
| 3 | 1/4" | 3,500 | 4 1/4" | 4 23/32" | 5 5/16" | 6 21/32" | Steel | 4 | 1/2" | 3 15/16" | 3 1/2" | ASME B30.26 | 0000000 | 000000 |
| 3 | 3/8" | 7,000 | 6" | 7 1/4" | 9 3/4" | 10 1/4" | Steel | 4 | 9/16" | 8 1/2" | 5 7/8" | ASME B30.26 | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
| 4 | 3/16" | 600 | 2" | 1 7/32" | 2" | 2 3/8" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
| 4 | 1/4" | 800 | 3" | 1 7/32" | 3" | 3 9/16" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |