Pull Down Clamps | McMaster-Carr

Filter by

Clamping Action

Clamp Type

Handle Position When Clamped

System of Measurement

Overall Length When Clamped

Holding Capacity

Draw Arm Style

Thread Size

Body Material

Mount Type

Holding Screw Thread Size

Maximum Clamping Clearance

Holding Screw Tip Material

Handle Style

Arm Length

Number of Mounting Holes

Length

Overall Height When Clamped

Material

Mounting Hole Diameter

REACH Compliance

RoHS Compliance

DFARS Compliance

Forward

How can we improve?

638 Products

Latch-Style Clamps

Latch-Style Toggle Clamps

Fit the draw arm over a latch plate and pull the handle to clamp.

Latch-Style Toggle Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Heavy Duty Latch-Style Toggle Clamps

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Right-Angle Latch-Style Toggle
Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Right-Angle Latch-Style Toggle Clamps

Mount the clamp on a lid and the latch plate on the side of a container.

Hold-Down Toggle Clamps

Mount these clamps to a bench top or other surface to keep workpieces in place.

Nonreflective Hold-Down Toggle Clamps

A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

Low-Profile Hold-Down Toggle Clamps

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Low-Profile Hold-Down Toggle
Clamps with Extra Hand Clearance

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

Heavy Duty Low-Profile Hold-Down Toggle Clamps

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Auto-Adjusting Heavy Duty
Hold-Down Toggle Clamps

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Heavy Duty Hold-Down Toggle Clamps

Hold-Down Toggle Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Auto-Adjusting Low-Profile
Hold-Down Toggle Clamps

Hold workpieces of different thicknesses without adjustment.

Low-Profile Hold-Down Toggle
Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Compact Hold-Down Toggle Clamps

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Compact Hold-Down Toggle
Clamps with Locking Handle

Push the lever to lock the handle and prevent accidental opening.

Dual-Mount Hold-Down Toggle Clamps

Two sets of mounting holes allow mounting on the bottom or side.

Weld-On Side-Mount Hold-Down Toggle Clamps

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

Side-Mount Hold-Down Toggle Clamps

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Undermount Hold-Down Toggle Clamps

Mount these clamps below a surface.

Rail-Mount Hold-Down Toggle Clamps

The mounting base secures these clamps to a rail or bar.

Low-Profile Rail-Mount Hold-Down Toggle Clamps

The handle locks in a horizontal position for more clearance above the clamp.

Long-Life Dual-Mount Air-Powered
Hold-Down Toggle Clamps

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

Dual-Mount Air-Powered Hold-Down Toggle Clamps

Air-Powered Hold-Down Toggle Clamps

These clamps have mounting holes on the bottom.

Holding Screws for Toggle Clamps

Replace worn screws or customize your clamps.

Tips for Toggle Clamp Holding Screws

Attach one of these nonmarring rubber or plastic tips to prevent a metal holding screw from damaging workpiece surfaces.

Bar-Style Hold-Down Clamps

Bench-Mount Bar-Style Hold-Down Clamps

Mount the base to a work surface using screws.

Drop-In Bar-Style Hold-Down
Clamps for Workholding Tables

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Fixture Clamps

Hold-Down Fixture Clamps

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Air-Powered Hold-Down Fixture Clamps

Mount using the holes in the base.

Threaded Air-Powered Hold-Down Fixture Clamps

Screw these clamps directly into a tapped hole in a fixture.

Ball-Lock Quick-Change Fixture Clamps

Build these components into fixture plates, machine subplates, and tombstones for quick changes. The system clamps and locates at the same time for accurate positioning with repeatability of ±0.0005".

Machine Table Clamps

Self-Supporting Setup Clamps

Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

Setup Clamps

Use with T-slot nuts or bolts and a support to secure a workpiece, vise, or fixture to a machine table.

Setup Clamps with Threaded Hole

Instead of a step block, support these clamps using a screw, leveling mount, or any other threaded object.

Step Setup Clamps

The stepped end provides support and quick height adjustment when paired with a step block.

Economy Setup Clamp and T-Slot Fastener Kits

Good for occasional machining, economy kits contain lower-strength components than standard kits.

Low-Profile Setup Clamps with Threaded Hole

Designed to provide more clearance above the nut than standard clamps, these have an offset shape. Also known as gooseneck clamps.

Dual-Clamping Low-Profile Setup Clamps

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

Low-Profile Setup Clamps

The offset shape provides more clearance above the nut than standard clamps. Also known as gooseneck clamps.

Setup Clamp and T-Slot Fastener Kits

Get everything needed for basic workholding on a machine table.

Nonmarring Setup Clamps

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.

Setup Clamps for Angled Workpieces

Unlike other setup clamps that grip the horizontal surface of a workpiece, these clamps have a pivoting ball in the tip to get a firm hold on angled parts.

Fingertip Setup Clamps

Making minimal contact with the workpiece while holding securely, these clamps are good for small parts and can clamp into holes and notches.

Machine Table Clamps for Round Workpieces

Use these clamps to hold large round parts for machining. Each clamp comes with five lengths of chain that combine to accommodate different size workpieces.

Vise Mounting Clamps

Smaller than standard setup clamps, these clamps leave more usable space on a machine table when mounting a vise.

Screw Clamps

Revolving Screw Clamps

When loosened, you can spin the body of this clamp around its mounting point for better access to the workpiece.

Hole-Mount Screw Clamps

Also known as press screws, mount these clamps through a drilled hole and turn the crank to move the jaw end of the screw in and out.

Screw Clamps

The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces.

Quick-Clamping Coil-Threaded
Rods, Screws, and Nuts

Combine fast-threading components to build a clamping assembly.

Bench-Top Locking Plier Clamps

Bench-Mount Locking Plier Clamps

Mount to the top of your workbench.

Portable Bench-Top Locking Plier Clamps

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

Push/Pull Toggle Clamps

Push or pull the plunger to hold your workpiece from the side.

Bench-Mount No-Twist C-Clamps

Hold the workpiece down against a bench or table.

T-Slotted Framing Toggle Clamps

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Angled-Edge Washers for Toggle Clamp Holding Screws

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Latch-Style Clamps

Latch-Style Toggle Clamps

Latch-Style Toggle Clamps with Locking Handle

Heavy Duty Latch-Style Toggle Clamps

Right-Angle Latch-Style ToggleClamps with Locking Handle