About Grease
More
About Lubricants
More
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants with PTFE provide long-lasting lubrication. Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic. Lubricants with boron nitride last long and cure to a semi-dry film that resists corrosion from salt water and won’t wash off.
Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).
DuPont® Silicone Lubricant repels moisture and is nonstaining.
Container | Each | Package | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Type | Additive | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | ||
DuPont® Multi-Use High Performance Lubricant | |||||||||
| 4 | __ | Squeeze Bottle | Boron Nitride | -20° to 250° | 00000000 | 00000 | __ | 000000 | 00 |
DuPont® Silicone Lubricant | |||||||||
| __ | 14 | Aerosol Can | Boron Nitride, Silicone | -40° to 400° | 00000000 | 00000 | 6 | 0000000 | 000000 |
Tri-Flow cleans, lubricates, and protects, even in extreme temperatures.
Long-Life Penetrating Lubricants
Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants. They go on as a foam to cling to parts and resist dripping.
High-Pressure Food Industry Penetrating Lubricants
Formulated to handle high loads and temperatures, these lubricants are NSF registered H1 for incidental food contact. Use them with chain and gears in food-processing and preparation areas and with hinges on ovens. They cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment. Lubricants go on as a foam to cling to parts and resist dripping.
Penetrating Lubricants for Chain
For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with PTFE provide long-lasting lubrication.
Lubricants with boron nitride penetrate into roller chain links and pins while wet—below 120° F it acts as a dry lubricant that won’t attract dust or dirt; above 120° F it acts as a wet lubricant.
Moisture-Resistant Grease
Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.
NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.
Grease with lithium thickener offers good heat resistance. Grease with boron nitride cures to a semi-dry film that resists corrosion from salt water and won’t wash off.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont® Pro Grease White Lithium Premium—Lithium Thickener | |||||||||
| 2 | Mineral | Boron Nitride | 10 oz. | Aerosol Can | -10° to 350° | 500° | White | 00000000 | 000000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont® Pro Grease White Lithium Premium—Lithium Thickener | ||||||||||
| 2 | Mineral | Boron Nitride | 10 oz. | Aerosol Can | -10° to 350° | 500° | White | 6 | 00000000 | 000000 |
Food Industry Grease
Use this grease in food-processing and preparation areas.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance. Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.
Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Grease cannot be sold to the listed areas due to product regulations.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Cannot Be Sold To | Each | |
Aluminum Thickener | |||||||||||
| 2 | Mineral | PTFE | 13 1/2 oz. | Aerosol Can | 15° to 350° | 500° | White | NSF Registered H1 | __ | 0000000 | 000000 |
Silica Thickener | |||||||||||
| 2 | Synthetic | PTFE | 11 oz. | Aerosol Can | -45° to 450° | Not Rated | White | NSF Registered H1 | CA, NY | 0000000 | 00000 |
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Aluminum Thickener | ||||||||||||
| 2 | Mineral | PTFE | 13 1/2 oz. | Aerosol Can | 15° to 350° | 500° | White | NSF Registered H1 | __ | 12 | 0000000 | 0000000 |
Silica Thickener | ||||||||||||
| 2 | Synthetic | PTFE | 11 oz. | Aerosol Can | -45° to 450° | Not Rated | White | NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |
No-Residue Mold-Release Lubricants
Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
Lubricants with PTFE create a long-lasting film that withstands high temperatures.
Dry-Film Lubricants
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with PTFE can be used on most rubber and plastic surfaces. Aerosol can with a flip-up straw has a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense as a spray. Lubricants with boron nitride resist corrosion from salt water and won’t wash off.
Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.
Food Industry Dry-Film Lubricants
Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour. Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.
Lubricants cannot be sold to the listed areas due to product regulations.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Lubricants | |||||||
| 5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 000000 |
| 11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Lubricants | ||||||||
| 5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 0000000 | 0000000 |
| 11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |
Long-Life Dry-Film Lubricants
Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOC (volatile organic compounds).
Overhead Door Dry-Film Lubricants
Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. These silicone lubricants repels water for use outdoors. Once dry, they form a thin lubricating layer that won’t rub off or attract dust.
Dry-Film Lubricants for Chain
A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.
Lubricants with PTFE can be used with most plastics and are chemically inert.