We will reply to your message within an hour.
More
Thicker walls and a 304 stainless steel seal make these valves tougher than brass pressure-regulating valves.
A cast iron body absorbs vibration from pressure changes to reduce wear and noise in your pipeline.
For a longer service life than brass and cast iron valves, these have a durable bronze body.
These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure.
Use this valve in light duty water systems with garden hose thread (GHT) connections.
Often used in wet conditions and harsh environments, these valves have a 316 stainless steel body for excellent corrosion resistance.
To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged to Fed. Std. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.
Change outlet pressure without using a gauge—turn the dial to adjust the outlet pressure in 5 or 10 psi increments.
Excellent performance at low pressures.
Often used on dispensers, humidifiers, and fountains, these valves have a 316 stainless steel body that can stand up to deionized water and corrosive conditions.
Valves have a brass body and NPT connections.
Prevent changes to your pressure setting—these valves come set at a nonadjustable outlet pressure.
Withstand more than six times the inlet pressure of standard pressure-regulating valves.
Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.
Often used for oxygen service and other high-purity applications, these valves are cleaned and bagged to meet CGA G-4.1 standards to prevent contamination.
For extremely high-pressure applications in tight spots, these valves handle the same inlet pressures as other ultra-high-pressure-regulating valves within a smaller footprint.
A 316 stainless steel body provides exceptional corrosion resistance in wet conditions and harsh environments.
Valves have a brass body.
Withstand inlet pressures up to 3,500 psi.
Our smallest pressure-regulating valve.
For easy panel mounting in your water system, these valves have threads below the adjustment knob and come with a panel-mount nut.
Regulate pressure in air and inert gas systems from your instrument panel—these valves have threads below the adjustment knob and come with a panel-mount nut.
Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.
Commonly used for oxygen service and other high-purity applications, these valves come cleaned and bagged to prevent contamination.
Reduce contaminants in gases used in research sample systems, emission monitoring systems, chromatography, and other high-purity applications. These valves have a 316 stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination.
These valves automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure.
Often used for pressure-vessel testing and other high-pressure applications, these valves can handle at least seven times the outlet pressure of standard tank-mount pressure-regulating valves.
Designed for nitrogen gas purging in air conditioning, refrigeration, and plumbing systems.
Commonly used in TIG welding where gas flow/coverage is a concern.
Flowmeters let you see the gas flow rate from a distance.
Body is cast iron.
For a longer service life than cast iron valves, these have a durable bronze body.
Control steam line pressure with ±1 psi accuracy.
These valves meet NSF/ANSI 61 for use in drinking water systems.
Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings.
Push-to-connect fittings form a low-pressure seal around plastic or soft metal tubing.
Valves have NPT connections.
A plastic body and fluoroelastomer seal stand up to harsh chemicals.
For a longer service life than standard valves for cryogenic liquids, these have a durable bronze body. They’re for use with liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.
Designed for oxygen service and other high-purity applications, these valves can withstand the extreme cold of liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.
Choose from valves for liquid argon, liquid nitrogen, liquid carbon dioxide, or liquid oxygen tanks.
Regulate air, gas, and liquid pressure on food, beverage, and pharmaceutical lines with these valves—they’re 3-A certified to meet sanitary design standards.
Designed to reduce contaminants in high-purity applications using hydrogen and methane gas, these valves have a stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination.
For use with acetylene, hydrogen, methane, propane, or propylene gas.
Install these valves directly in gas distribution pipelines.
It's like getting four regulators in one—each comes with four springs so you can change between regulating pressure ranges of 2-30, 10-50, 30-90, and 100-180 psi.
These valves have a cast iron body.
For a longer service than cast iron valves, these have a durable bronze body and a 303 stainless steel seal.
Use these valves in pipelines.
Threads below the adjustment knob and an included panel-mount nut allow you to add these valves to your instrument panel.
Designed to meet 3-A sanitary standards, these valves regulate liquid, gas, and air pressure in hygienic zones of food and beverage plants.
Alter the set pressure to suit your application.
These valves are commonly used with pumps in low-pressure water systems.
Change set pressure without guesswork—the adjustment screw is marked in 25 psi increments for making pressure adjustments without a gauge.
To gradually relieve pressure in lines for diesel fuel, fuel oil, gasoline, and kerosene, these valves begin opening at the set pressure and fully open at about 10% over the set pressure.
A finely threaded adjustment screw lets you make precise set pressure adjustments.
Less than a quarter of the height of standard pressure-relief valves, these are often installed on tanks in low-clearance areas.
For a low-pressure seal around plastic and soft metal tubing, these valves have push-to-connect fittings.
Design a valve specifically for your process media and set pressure. Choose from a valve for air, inert gas, water, hydraulic oil, fuel oil, gasoline, or diesel fuel and a set pressure.
With a three-port design, these valves allow inline flow from the inlet to the outlet during normal conditions and divert flow through the relief port in overpressure conditions. They are often used with feed pumps for fertilizers and bleach.
These valves are often used with catalysts, pH buffers, and electroplating solutions.
These valves are often used in hydraulic and lubrication systems.
Cleaned and bagged for oxygen service and other high-purity applications, these valves are built to withstand the extreme cold of liquid carbon dioxide, liquid nitrogen, and liquid oxygen.
These valves have a bronze body for durability and a long service life. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Commonly used with high-volume blowers, compressors, and air-powered conveyors, these valves quickly relieve a large amount of air in systems with a pipe size of 2 or greater.
Commonly used with high-volume blowers, compressors, and air-powered conveyors, these valves quickly relieve a large amount of air in systems with a pipe size of 2 or greater. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
With a 316 stainless steel body for exceptional corrosion resistance, these valves are often used in wet conditions and harsh environments. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Body is brass or nickel-plated brass. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
The most basic option for air and inert gas applications.
For corrosion resistance in wet conditions and harsh environments, these valves have a 303 stainless steel body. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Change set pressure to suit your application—this valve includes four interchangeable color-coded springs with different set pressure ranges.
These valves meet ASME Code Section VIII for use with water pressure vessels.
Also known as T & P valves, these open when water temperature reaches 210° F or at the set pressure.
Protect your water-heating system with these valves that meet ASME Code Section IV for hot water heaters and boilers.
These valves meet ASME Code Section I for use with steam power boilers requiring pressure relief above 15 psi.
For use with low-pressure steam-heating boilers requiring pressure relief at 15 psi, these valves meet ASME Code Section IV.
Choose these valves for small steam-heating boilers requiring pressure relief between 5 psi and 12 psi.
Use these valves with liquid argon, liquid nitrogen, and liquid oxygen.
Our only valves that meet ASME Code Section VIII for use with cryogenic pressure vessels. They are for use with argon, carbon dioxide, helium, hydrogen, methane, nitrogen, and oxygen.
For a longer service life than brass vacuum-regulating valves, these are made of bronze for strength and durability.
For precise control over your vacuum level, these valves have ±0.1% accuracy.
Regulate vacuum levels from your instrument panel with these valves that have threads below the adjustment handle and a panel-mount nut.
A lighter and more corrosion-resistant alternative to metal vacuum-regulating valves.
These valves have a brass body.
When input pressure varies, use these valves to maintain a consistent pressure.
To set the pressure, unscrew the cap and turn the adjusting screw.
The pressure setting on these valves cannot be adjusted while they are installed.
An external nut lets you adjust the pressure without disassembling the valve.
These valves maintain a consistent pressure in a system when input pressure varies.
Set a specific pressure and these valves will maintain it by diverting excess fluid to a tank.
Set a specific pressure and these valves will maintain it.