The small dial on these gauges allows for installation in tight spaces.

Measure small pressure changes in ventilation systems, hydraulic applications, and other critical processes.

Also known as isolators or diaphragm seals, these protect gauges from corrosive process media.

Read pressure directly at the source and send data remotely with one device.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

Remotely track your system's pressure readings from the convenience of a smartphone or tablet. Good for preventative maintenance and route-based monitoring, these battery-powered transmitters use Bluetooth to alert you when equipment requires your attention.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.

Specifically made for compressed air and gas systems, these transmitters remotely monitor pressure and vacuum.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Designed for compressed air and gas systems, these transmitters remotely monitor vacuum.

Often used for oxygen service and other high-purity applications, these valves are cleaned and bagged to meet CGA G-4.1 standards to prevent contamination.

Withstand inlet pressures up to 3,500 psi.

Commonly used for oxygen service and other high-purity applications, these valves come cleaned and bagged to prevent contamination.

Designed for nitrogen gas purging in air conditioning, refrigeration, and plumbing systems.

Reduce contaminants in gases used in research sample systems, emission monitoring systems, chromatography, and other high-purity applications. These valves have a 316 stainless steel and brass body with a smooth finish to reduce dust collection and internal components designed to protect the seal and diaphragm from contamination.