Rated IP67 for protection from dust and temporary submersion.

Able to withstand high currents, these switches are often used with motors and pumps.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Rated IP67, these switches are protected from temporary submersion.

A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.

A nickel-plated brass cap protects toggles from impact.

Mount these switches under your desktop to keep your workspace clear and prevent accidental switching.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Thanks to their ability to handle higher current than switches with contact blocks, these switches are often found in applications from large motors to warehouse lighting systems.

The enclosure not only protects these switches, but also adds options for how you install them.

A quick push is all it takes to actuate these switches.

A housing seals in anything that could ignite flammable material, so you can use these switches where explosive gas, dust, and fibers may be. They actuate with a quick push.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

A base that lights up draws attention to emergency stops. When pushed, these switches immediately cut power.

Save space on your panel by using one switch for several tasks. These switches actuate with the push of a button.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Save space on a panel by using one switch to perform multiple switching functions.

Immediately cut power with a single push.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Immediately cut power with a single push.

Send a signal from your circuit board with the push of a button.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Install in 8 mm dia. cutouts.

Made of stainless steel, these covers protect push-button actuators from impact.

Install in 12 mm dia. cutouts.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns.

Made of yellow polycarbonate plastic, these enclosed switches are easy to see and resist dents, chips, and cracks. They are more corrosion resistant than aluminum enclosed switches and withstand washdowns and oil/coolant spraying.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Immediately cut power with a single push.

Often used to trigger alarms, these switches have a recessed button to prevent accidental activation. Mount under desks or in other discrete locations to avoid drawing attention.

Snap these switches onto your T-slotted framing rails—no need to drill or disassemble your existing structure.

Alternate between two batteries without interrupting power.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 16 mm switch.

These switches withstand temporary submersion.

A durable rubber housing covers the buttons and protects these switches from impact.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.

Control machinery such as cranes, hoists, or trolleys with a wireless switch. About the size of a cell phone, these switches fit in the palm of your hand.

Keep your hands free for other tasks by triggering switches with your foot.

Apply pressure from any direction to actuate these switches.

Send signals to equipment up to 130 feet away. Because these foot switches are self-powered, they eliminate the clutter of wires and the fuss of batteries.

Step on these switches for hands-free actuation in an area with frequent washdowns.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. Yank the cable anywhere along your line to quickly cut power in emergencies.

Tug on the cable anywhere along your line to immediately cut the flow of power. This multi-functional unit also sends a signal to restart machinery with the push of a button, doing the job of two units in one.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

Step on these mats to control doors, lights, or alarms.

Customize the length of these switches by cutting them from a 25-foot roll.

Customize the length of these switches by cutting them from a 50-foot roll.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment.