To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices. They also have a Means of Protection rating of 2xMOPP, which is the highest level of shock protection available for medical-grade power supplies, so in addition to using them with lab and medical equipment, you can use them with devices that come into contact with patients.

Unlike adapters with bodies that plug directly into an outlet, the body of these adapters rests on a desk or the floor, so it won’t block multiple outlets. Adapters with an IEC C8 input connection require power cords with a C7 socket. Those with an IEC C14 input connection require power cords with a C13 socket.

When selecting an adapter, make sure the DC voltage and amps for the pin output connection can handle the requirements of your device. Choosing a DC voltage and amps that are much higher than you need will not improve performance.

These adapters use switching regulation, which means they produce the stated voltage despite fluctuations in your outlet’s power and the power being drawn by your device. It also means they won’t get too hot.

If you exceed the maximum voltage or load, these adapters shut down to protect both the adapters and the connected equipment.

All of these adapters meet European safety standards. Adapters with Class II shock protection have two levels of insulation to prevent electrical shocks. Those with Class I shock protection prevent electrical shocks with a combination of insulation and a protective ground.

Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics. Designed with switching regulation, they maintain consistent voltage during power fluctuations and don’t get too hot. They meet U.S., Canadian, European, Australian, New Zealand, and Chinese safety standards.

A limited power source (LPS) low-voltage output decreases the risk of electric shock if something fails inside these cords. Class II shock protection means they have two levels of insulation. These cords meet U.S. DOE (Department of Energy) Level VI standards for energy efficiency when they're in-use, as well as when they're plugged in but not in use.

Choose an adapter cord with an output voltage that matches the voltage of your device. The polarity of the adapter cord and your device must also be the same. Look for the polarity illustration on your device or the adapter cord you’re replacing and pick a cord to match.

Plug these cords into a vehicle socket to charge devices that run on AC voltage. Also known as inverters or converters, they prevent damage from overloads.

Power up mobile devices and other electronics.

Unlike many chargers in the market, these are high quality and reliable. All have passed strict U.S., Canadian, or European Union safety standards. Some of these chargers even have an LPS output, so if something fails inside the charger, it limits the risk of electrical shock. Most of our wall chargers also meet standards for energy efficiency when they're in-use, as well as when they're plugged in but not charging. Chargers that use switching regulation produce the stated voltage despite fluctuations in your outlet’s power and the power being drawn by your device. It also means they won’t get too hot.

USB-C chargers are quickly becoming the new standard, often seen on new phones and tablets. Some are USB-C Power Delivery 3.0 certified, so they charge your devices on average 3-4 times faster than standard chargers because they send more power over your cable. 18W chargers will power phones and tablets sold after 2016. 27W chargers will power small laptops. Choose chargers with an output greater than 27W to charge large laptops and other high-power devices.

USB-A chargers have the traditional USB connection. 5W chargers are typically used with small electronic devices such as speakers, routers, and cameras. 18W chargers will power phones and tablets sold after 2016. To charge large laptops and other high-power devices, use chargers with an output greater than 27W.

Chargers cannot be sold to the listed areas due to energy efficiency regulations.

Simply place smartphones on these pads to immediately start charging them—there’s no need to remove most cases or plug them into a charging cord. All pads are compatible with smartphones that have Qi technology, so they work with Apple iPhones made in 2017 or later and many Android phones, including the Samsung Galaxy S series. Often used on desks and other flat surfaces, these charging pads make it easy to grab your phone while it’s charging because you don’t have to unplug it.

Pads that are Qi certified meet safety, compatibility, and energy-efficiency standards set by the Wireless Power Consortium. They’re CE Marked, so you know they meet strict European safety standards. They’re also FCC compliant to meet regulations for electromagnetic interference.

Style 5 charging pads come with a mounting stand and a clip, so you can install them on windshields, dashboards, or vents in a variety of vehicles. Adjustable clamps with silicon pads hold your phone in place while it’s charging, even when driving through turns and over bumps. A USB cord is included.

A variety of USB cords and USB chargers are sold separately.