DIN-Rail Power Supplies
Mount these power supplies onto DIN rails inside electrical panels and enclosures—they convert AC to DC voltage to power electronic equipment. With a set of standard features, they're a cost-effective option for clean, controlled environments with a stable supply of electricity. Use them to power testing and measuring devices as well as commercial equipment, such as printers and ATMs. Unlike heavy duty power supplies, they're not made for tough, dirty environments.
All of these power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot.
If you exceed the maximum voltage, current, or load, these power supplies shut down to protect both the power supply and the connected equipment. Some also meet the voltage requirements for use in an SELV (separated extra low voltage) circuit.
With various domestic and international certifications, such as UL listing, CE marking, and TUV certification, these power supplies meet stringent safety standards.
Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.
Power factor shows how effectively a power supply draws AC power from the main electrical supply. The higher the power factor—up to a maximum score of 1—the lower your operating cost.
Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. High-efficiency power supplies cost less money to operate and produce less heat, meaning cooler temperatures in your electrical cabinet.
Power supplies that cannot be sold to the regions listed do not meet local energy efficiency requirements.
Output | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Voltage (Adjustment Range) | Current, A | Max. Output Noise Peak-to-Peak, mV DC | Power Factor | Efficiency | For Isolated Low Voltage Circuit Type | Specifications Met | Cannot Be Sold To | Each | |
Single Phase—100-240V AC Input Voltage | |||||||||
Screw-Clamp Terminals Input and Output | |||||||||
| 48V DC (43.2-52.8V DC) | 5 | 180 | 0.98 @ 115 V AC 0.9 @ 230 V AC | 88% @ 115 V AC 90% @ 230 V AC | SELV | UL Listed C-UL Listed UL Recognized Component C-UL Recognized Component CE Marked D Marked UL 508 | CA, VT | 00000000 | 0000000 |
Motor-Starting DIN-Rail Power Supplies
Convert AC voltage to power DC motors, solenoid valves, charging capacitors, and other devices that require large start-up current. These power supplies mount onto DIN rails and are capable of briefly boosting power above their maximum output. It means you don't have to use an oversized power supply just to handle spikes in demand. With a set of standard features, they're a cost-effective way to power motors in clean, controlled environments that have a stable supply of electricity. They're not recommended for tough industrial environments.
All of these power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. Some are also SEMI F47 compliant, meaning they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.
If you exceed the maximum voltage, current, or load, these power supplies shut down to protect both the power supply and the connected equipment. Some also meet the voltage requirements for use in an SELV (separated extra low voltage) circuit.
With various domestic and international certifications, such as UL listing, CE marking, and TUV certification, these power supplies meet stringent safety standards. Some meet additional standards for marine vessels classed by DNV-GL.
Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.
Power factor shows how effectively a power supply draws AC power from the main electrical supply. The higher the power factor—up to a maximum score of 1—the lower your operating cost.
Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. High-efficiency power supplies cost less money to operate and produce less heat, meaning cooler temperatures in your electrical cabinet.
Power supplies with an output voltage signal send a signal that indicates the status of their output voltage, so you know if your power supply isn't working correctly. Configure them to light up a panel or activate an alarm when voltage drops, or connect them to a PLC for remote system monitoring. They have a remote on/off feature that can be controlled by connecting to an external DC power source, such as a battery. Configure the power source to send a signal when you press a button or flip a switch, and the power supply will turn on or off.
Power supplies that cannot be sold to the regions listed are restricted by local energy efficiency requirements.
Output | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Voltage (Adjustment Range) | Current, A | Peak Current | Max. Output Noise Peak-to-Peak, mV DC | Power Factor | Efficiency | For Isolated Low Voltage Circuit Type | Cannot Be Sold To | Each | |
Single Phase—100-240V AC Input Voltage | |||||||||
Screw-Clamp Terminals Input and Output—With Output Voltage Signal and Remote On/Off Feature | |||||||||
| 24V DC (22.5-26.4V DC) | 20 | 30 A, 5 seconds | 150 | 0.98 @ 115 V AC 0.93 @ 230 V AC | 92% @ 115 V AC 94% @ 230 V AC | SELV | __ | 00000000 | 0000000 |
| 24V DC (22.5-28.5V DC) | 5 | 7.5 A, 5 seconds | 150 | 0.98 @ 115 V AC 0.93 @ 230 V AC | 90% @ 115 V AC 92% @ 230 V AC | SELV | CA, VT | 0000000 | 000000 |
| 24V DC (22.5-28.5V DC) | 10 | 15 A, 5 seconds | 150 | 0.98 @ 115 V AC 0.93 @ 230 V AC | 92% @ 115 V AC 94% @ 230 V AC | SELV | CA, VT | 00000000 | 000000 |
| 48V DC (45-55.2V DC) | 10 | 15 A, 5 seconds | 150 | 0.98 @ 115 V AC 0.93 @ 230 V AC | 92% @ 115 V AC 94% @ 230 V AC | SELV | __ | 00000000 | 000000 |
Power Supplies
(Screw Terminal Input ×
Screw Terminal Output)
To power electronics ranging from simple prototypes to complex industrial automation and process control equipment, these general purpose power supplies convert AC to DC voltage. Mount them to a surface inside your device’s enclosure.
So you don’t accidentally touch internal components and shock yourself, these power supplies have their own housing. If you occasionally need to poke around inside your device’s enclosure, the housing also protects the power supplies themselves from damage. But compared to open-frame power supplies, these have a larger footprint, so they won’t fit in tight spaces.
For output wire connections, choose from standard screw terminals, screw-clamp terminals, and tab terminals. Use tab terminals if you have wires with ring terminal ends. To connect them, slide a screw through the hole in the tab terminal, slip the ring terminal from your wire over the screw, and tighten a nut on the end of the screw to hold everything in place. Screws, nuts, and ring terminals are not included.
All of these power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. Power supplies that are SEMI F47 compliant meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.
If you exceed the maximum current, load, or voltage, these power supplies shut down to protect both the power supply and the connected equipment. All meet stringent safety standards.
Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.
Power factor shows how effectively a power supply draws AC power from the main electrical supply. The higher the power factor—up to a maximum score of 1—the lower your operating cost.
Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. High-efficiency power supplies cost less money to operate and produce less heat, meaning cooler temperatures in your electrical cabinet.
Power supplies that cannot be sold to the regions listed are restricted by local energy efficiency requirements.
For technical drawings and 3-D models, click on a part number.
Output | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Voltage (Voltage Adjustment) | Current, A | Power, W | Number of Power Connections | Max. Output Noise Peak-to-Peak, mV DC | Power Factor | Efficiency | Ht. | Wd. | Dp. | Protections Provided | Specifications Met | Cannot Be Sold To | Each | |
Single Phase—100V AC-240V AC Input Voltage | ||||||||||||||
Screw Terminals Input × Screw Terminals Output | ||||||||||||||
| 5V DC (4.5V DC-5.5V DC) | 50 | 250 | 2 | 120 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 73% @ 100 V AC 74% @ 115 V AC 77% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 0000000 |
| 5V DC (4.5V DC-5.5V DC) | 100 | 500 | 2 | 120 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 76% @ 100 V AC 77% @ 115 V AC 79% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 12V DC (10.8V DC-13.2V DC) | 8.4 | 100.8 | 1 | 150 | 0.9 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 82% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 1.6" | 3.8" | 4.3" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 12V DC (10.8V DC-13.2V DC) | 12.5 | 150 | 1 | 150 | 0.93 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 84% @ 115 V AC 87% @ 230 V AC | 1.6" | 3.8" | 5.1" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 12V DC (10.8V DC-13.2V DC) | 25 | 300 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 79% @ 100 V AC 80% @ 115 V AC 82% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 12V DC (10.8V DC-13.2V DC) | 50 | 600 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 81% @ 100 V AC 82% @ 115 V AC 84% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 15V DC (13.5V DC-16.5V DC) | 6.7 | 100.5 | 1 | 150 | 0.9 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 83% @ 100 V AC 83% @ 115 V AC 86% @ 230 V AC | 1.6" | 3.8" | 4.3" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 15V DC (13.5V DC-16.5V DC) | 10 | 150 | 1 | 150 | 0.93 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 84% @ 115 V AC 87% @ 230 V AC | 1.6" | 3.8" | 5.1" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 15V DC (13.5V DC-16.5V DC) | 20 | 300 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 81% @ 100 V AC 82% @ 115 V AC 84% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 15V DC (13.5V DC-16.5V DC) | 40 | 600 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 82% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 24V DC (21.6V DC-26.4V DC) | 4.3 | 103.2 | 1 | 150 | 0.9 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 85% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 1.6" | 3.8" | 4.3" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 24V DC (21.6V DC-26.4V DC) | 6.4 | 153.6 | 1 | 150 | 0.93 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 87% @ 100 V AC 87% @ 115 V AC 90% @ 230 V AC | 1.6" | 3.8" | 5.1" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 24V DC (21.6V DC-26.4V DC) | 12.5 | 300 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 82% @ 100 V AC 83% @ 115 V AC 86% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 24V DC (21.6V DC-26.4V DC) | 25 | 600 | 2 | 150 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 36V DC (32.4V DC-39.6V DC) | 2.8 | 100.8 | 1 | 200 | 0.9 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 86% @ 100 V AC 86% @ 115 V AC 89% @ 230 V AC | 1.6" | 3.8" | 4.3" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 36V DC (32.4V DC-39.6V DC) | 4.2 | 151.2 | 1 | 200 | 0.93 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 87% @ 100 V AC 87% @ 115 V AC 90% @ 230 V AC | 1.6" | 3.8" | 5.1" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 36V DC (32.4V DC-39.6V DC) | 8.4 | 302.4 | 2 | 200 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 83% @ 100 V AC 83% @ 115 V AC 87% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 36V DC (32.4V DC-39.6V DC) | 16.7 | 601.2 | 2 | 200 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 85% @ 100 V AC 86% @ 115 V AC 88% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 48V DC (43.2V DC-52.8V DC) | 2.1 | 100.8 | 1 | 200 | 0.9 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 86% @ 100 V AC 86% @ 115 V AC 89% @ 230 V AC | 1.6" | 3.8" | 4.3" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 48V DC (43.2V DC-52.8V DC) | 3.2 | 153.6 | 1 | 200 | 0.93 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 87% @ 100 V AC 87% @ 115 V AC 90% @ 230 V AC | 1.6" | 3.8" | 5.1" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | CA, VT | 00000000 | 00000 |
| 48V DC (43.2V DC-52.8V DC) | 6.3 | 302.4 | 2 | 200 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 82% @ 100 V AC 83% @ 115 V AC 86% @ 230 V AC | 1.6" | 4" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 48V DC (43.2V DC-52.8V DC) | 12.5 | 600 | 2 | 200 | 0.95 @ 230 V AC, 0.98 @ 115 V AC, 0.99 @ 100 V AC | 85% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 4.7" | 7.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
Screw Terminals Input × Tab Terminals Output | ||||||||||||||
| 12V DC (10.8V DC-13.2V DC) | 84 | 1,008 | 1 | 210 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 81% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 2.4" | 5.9" | 9.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 12V DC (10.8V DC-13.2V DC) | 125 | 1,500 | 1 | 210 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 81% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 2.4" | 7" | 10.6" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 15V DC (13.5V DC-16.5V DC) | 67 | 1,005 | 1 | 210 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 82% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 2.4" | 5.9" | 9.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 15V DC (13.5V DC-16.5V DC) | 100 | 1,500 | 1 | 210 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 82% @ 100 V AC 82% @ 115 V AC 85% @ 230 V AC | 2.4" | 7" | 10.6" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 24V DC (21.6V DC-26.4V DC) | 42 | 1,008 | 1 | 150 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 5.9" | 9.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 24V DC (21.6V DC-26.4V DC) | 64 | 1,536 | 1 | 150 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 7" | 10.6" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 36V DC (32.4V DC-39.6V DC) | 28 | 1,008 | 1 | 200 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 5.9" | 9.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 36V DC (32.4V DC-39.6V DC) | 42 | 1,512 | 1 | 200 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 7" | 10.6" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 48V DC (43.2V DC-52.8V DC) | 21 | 1,008 | 1 | 300 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 85% @ 115 V AC 88% @ 230 V AC | 2.4" | 5.9" | 9.5" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
| 48V DC (43.2V DC-52.8V DC) | 32 | 1,536 | 1 | 300 | 0.95 @ 230 V AC, 0.98 @ 100 V AC, 0.98 @ 115 V AC | 84% @ 100 V AC 84% @ 115 V AC 87% @ 230 V AC | 2.4" | 7" | 10.6" | Overcurrent, Overload, Overvoltage | UL Recognized Component, C-UL Recognized Component, CE Marked, D Marked, SEMI F47 Compliant | __ | 00000000 | 000000 |
Open-Frame Power Supplies
Convert AC to DC voltage to power equipment in tight spaces—since these power supplies don’t have an enclosure, you can use them inside devices where enclosed power supplies can’t fit. The open construction lets heat out, so they also run cooler than standard power supplies with the same output. However, since they are not enclosed, these power supplies can shock you if you touch their components. They are best for devices with sealed housings, and should not be used in enclosures that are opened frequently.
Reliable
These use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system. It also means they won’t get too hot.
When these power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this won't affect most applications, this noise can interfere with other signals in extremely sensitive applications. The lower the output noise, the less interference it creates.
Energy Efficient
The combination of power factor and efficiency gives you a sense for how efficiently these draw AC power and convert it into DC power, which ultimately affects your operating cost. The closer the power factor is to 1, and the higher the efficiency percentage, the lower the operating cost. The more efficient your power supply, the cooler it runs too.
Safe
These power supplies meet U.S. and international safety standards. If you exceed the maximum current, load, or voltage, they’ll shut down to protect both the power supply and the connected equipment.
Output | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power, W | Voltage | Current, A | No. of Output Power Connections | Max. Output Noise Peak-to-Peak, mV DC | Power Factor | Efficiency | Ht. | Wd. | Dp. | Specifications Met | Each | |
Single Phase—100-240V AC Input Voltage | ||||||||||||
Wire Leads Input and Output | ||||||||||||
| 30 | 12V DC | 2.5 | 1 | 360 | Not Rated | 85% @ 100 V AC 88% @ 230 V AC | 1.1" | 2" | 3.5" | UL Recognized Component C-UL Recognized Component CE Marked D Marked | 000000 | 000000 |
| 30 | 24V DC | 1.3 | 1 | 360 | Not Rated | 87% @ 100 V AC 90% @ 230 V AC | 1.1" | 2" | 3.5" | UL Recognized Component C-UL Recognized Component CE Marked D Marked | 000000 | 00000 |
| 100 | 12V DC | 8.5 | 1 | 400 | 0.97 @ 100 V AC 0.87 @ 230 V AC | 87% @ 100 V AC 89% @ 230 V AC | 1.1" | 2.4" | 6.1" | UL Recognized Component C-UL Recognized Component CE Marked D Marked | 000000 | 00000 |
| 100 | 24V DC | 4.3 | 1 | 600 | 0.97 @ 100 V AC 0.87 @ 230 V AC | 86% @ 100 V AC 89% @ 230 V AC | 1.1" | 2.4" | 6.1" | UL Recognized Component C-UL Recognized Component CE Marked D Marked | 000000 | 00000 |