We will reply to your message within an hour.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.
Fasten clips to a surface, and snap the channel on the back of an outlet strip into the clips.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Clamp an outlet strip to your work surface to quickly plug in and unplug devices.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
Keep personnel safe from electric shock with ground fault protection.
Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
Power computers, lab equipment, and office machines that have IEC connections.
A filter through the middle isolates two pairs of outlets, so high voltage equipment plugged into one pair won’t affect the other pair.
With a rubber housing, these outlet strips withstand drops and other impact.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.
Connect multiple devices from a single outlet.
These curved outlet strips clamp onto a pole or table leg.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
Mount these strips into standard 19" wide electronics racks and enclosures.
No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.
Install these extra-long strips onto the frame of an electrical cabinet.
Bring power to workstations that are not near a wall—these poles mount from the ceiling.
Power devices above and below your workbench while keeping your outlet strip out of the way.
Designed for indoor use, these cords are often used to power appliances.
Power multiple devices with one extension cord.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Put overhead outlets in arm’s reach.
A locking lever on the socket keeps multiple devices connected to these extension cords.
Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.
Charge multiple devices at once.