About Installing Solid Rivets
More
About Installing Blind Rivets
More
Copper Domed Head Blind Rivets
Copper rivets are electrically conductive, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
Brass Mandrel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Dia. | |||||||||||
0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | __ | 100 | 000000000 | 000000 |
0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | __ | 100 | 000000000 | 00000 |
0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | __ | 50 | 000000000 | 00000 |
0.251"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | Not Rated | Not Rated | __ | 50 | 000000000 | 00000 |
Steel Mandrel | |||||||||||
1/8" Dia. | |||||||||||
0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 210 | 300 | IFI 114 Standards | 100 | 000000000 | 0000 |
0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 210 | 300 | IFI 114 Standards | 100 | 000000000 | 00000 |
0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 210 | 300 | IFI 114 Standards | 100 | 000000000 | 0000 |
0.251"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 210 | 300 | IFI 114 Standards | 100 | 000000000 | 00000 |
Copper Domed Head Solid Rivets
Copper rivets are electrically conductive, nonmagnetic, and have good corrosion resistance.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Domed Head Style | Head Dia. | Head Ht. | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||
---|---|---|---|---|---|---|---|---|---|
0.188" | 0.25" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 200 | 000000000 | 000000 |
0.313" | 0.375" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 200 | 000000000 | 00000 |
0.438" | 0.5" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
0.688" | 0.75" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 00000 |
0.938" | 1" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 50 | 000000000 | 0000 |
3/16" Dia. | |||||||||
0.281" | 0.375" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
0.406" | 0.5" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 00000 |
0.656" | 0.75" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 00000 |
0.906" | 1" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 25 | 000000000 | 0000 |
1.406" | 1.5" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 25 | 000000000 | 00000 |
1/4" Dia. | |||||||||
0.375" | 0.5" | 0.257" | F | Round | 0.46" | 0.196" | 25 | 000000000 | 00000 |
0.625" | 0.75" | 0.257" | F | Round | 0.46" | 0.196" | 25 | 000000000 | 00000 |
0.875" | 1" | 0.257" | F | Round | 0.46" | 0.196" | 10 | 000000000 | 0000 |
Copper Flat Head Solid Rivets
Copper rivets are electrically conductive, nonmagnetic, and have good corrosion resistance.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Pkg. Qty. | Pkg. | |
1/8" Dia. | ||||||||
---|---|---|---|---|---|---|---|---|
0.188" | 0.25" | 0.129" | No. 30 | 0.26" | 0.048" | 200 | 000000000 | 000000 |
0.313" | 0.375" | 0.129" | No. 30 | 0.26" | 0.048" | 200 | 000000000 | 00000 |
0.438" | 0.5" | 0.129" | No. 30 | 0.26" | 0.048" | 100 | 000000000 | 00000 |
0.688" | 0.75" | 0.129" | No. 30 | 0.26" | 0.048" | 25 | 000000000 | 0000 |
0.938" | 1" | 0.129" | No. 30 | 0.26" | 0.048" | 25 | 000000000 | 0000 |
3/16" Dia. | ||||||||
0.281" | 0.375" | 0.191" | No. 11 | 0.387" | 0.069" | 50 | 000000000 | 00000 |
0.406" | 0.5" | 0.191" | No. 11 | 0.387" | 0.069" | 25 | 000000000 | 0000 |
0.656" | 0.75" | 0.191" | No. 11 | 0.387" | 0.069" | 25 | 000000000 | 00000 |
0.906" | 1" | 0.191" | No. 11 | 0.387" | 0.069" | 25 | 000000000 | 00000 |
1.406" | 1.5" | 0.191" | No. 11 | 0.387" | 0.069" | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||||
0.375" | 0.5" | 0.257" | F | 0.515" | 0.091" | 25 | 000000000 | 00000 |
0.625" | 0.75" | 0.257" | F | 0.515" | 0.091" | 25 | 000000000 | 00000 |
0.875" | 1" | 0.257" | F | 0.515" | 0.091" | 25 | 000000000 | 00000 |
Solid Rivets with Washer for Soft Material
The washer creates a large holding surface on the back of the material. Also known as belt rivets, use for fastening conveyor belts or leather. Install in a countersunk hole and the angled head sits flush with the material's surface. These rivets are made of copper, which is electrically conductive, nonmagnetic, and has good corrosion resistance.
Installation requires access to both sides of the material as well as a tool and a hammer.
For technical drawings and 3-D models, click on a part number.
For Max. Material Thick. | Lg. | Overall Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Countersink Angle | Washer Thick. | Material | Pkg. Qty. | Pkg. | |
No. 6—0.2" Dia. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
0.546" | 0.66" | 0.75" | 0.234" | A | 0.688" | 0.09" | 144° | 0.062" | 110 Copper | 10 | 000000000 | 000000 |
No. 6—0.228" Dia. | ||||||||||||
0.796" | 0.91" | 1" | 0.234" | A | 0.688" | 0.09" | 144° | 0.062" | 110 Copper | 5 | 000000000 | 0000 |
1.296" | 1.41" | 1.5" | 0.234" | A | 0.688" | 0.09" | 144° | 0.062" | 110 Copper | 5 | 000000000 | 0000 |
No. 7—0.191" Dia. | ||||||||||||
0.335" | 0.43" | 0.5" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 0000 |
0.46" | 0.555" | 0.625" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 0000 |
0.585" | 0.68" | 0.75" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 0000 |
0.835" | 0.93" | 1" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 00000 |
1.085" | 1.18" | 1.25" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 00000 |
1.335" | 1.43" | 1.5" | 0.194" | No. 10 | 0.563" | 0.07" | 144° | 0.056" | 110 Copper | 10 | 000000000 | 00000 |
No. 8—0.181" Dia. | ||||||||||||
0.222" | 0.312" | 0.375" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 25 | 000000000 | 00000 |
0.347" | 0.437" | 0.5" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 25 | 000000000 | 00000 |
0.472" | 0.562" | 0.625" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 25 | 000000000 | 00000 |
0.597" | 0.687" | 0.75" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 25 | 000000000 | 00000 |
0.722" | 0.812" | 0.875" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 10 | 000000000 | 0000 |
0.847" | 0.937" | 1" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 10 | 000000000 | 00000 |
1.097" | 1.187" | 1.25" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 10 | 000000000 | 00000 |
1.347" | 1.437" | 1.5" | 0.182" | No. 14 | 0.5" | 0.063" | 144° | 0.05" | 110 Copper | 10 | 000000000 | 0000 |
No. 9—0.161" Dia. | ||||||||||||
0.237" | 0.317" | 0.375" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 50 | 000000000 | 00000 |
0.362" | 0.442" | 0.5" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 50 | 000000000 | 00000 |
0.487" | 0.567" | 0.625" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
0.612" | 0.692" | 0.75" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
0.737" | 0.817" | 0.875" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
0.862" | 0.942" | 1" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
1.112" | 1.192" | 1.25" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
1.362" | 1.442" | 1.5" | 0.166" | No. 19 | 0.469" | 0.058" | 144° | 0.045" | 110 Copper | 25 | 000000000 | 00000 |
No. 10—0.151" Dia. | ||||||||||||
0.245" | 0.32" | 0.375" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 25 | 000000000 | 00000 |
0.37" | 0.445" | 0.5" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 25 | 000000000 | 00000 |
0.495" | 0.57" | 0.625" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 25 | 000000000 | 00000 |
0.62" | 0.695" | 0.75" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 25 | 000000000 | 00000 |
0.745" | 0.82" | 0.875" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 10 | 000000000 | 0000 |
0.87" | 0.945" | 1" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 10 | 000000000 | 0000 |
1.12" | 1.195" | 1.25" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 10 | 000000000 | 0000 |
1.37" | 1.445" | 1.5" | 0.152" | No. 24 | 0.438" | 0.055" | 144° | 0.041" | 110 Copper | 10 | 000000000 | 0000 |
No. 12—0.137" Dia. | ||||||||||||
0.262" | 0.33" | 0.375" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 50 | 000000000 | 00000 |
0.387" | 0.455" | 0.5" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 25 | 000000000 | 0000 |
0.512" | 0.58" | 0.625" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 25 | 000000000 | 0000 |
0.637" | 0.705" | 0.75" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 25 | 000000000 | 00000 |
0.887" | 0.955" | 1" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 25 | 000000000 | 00000 |
1.137" | 1.205" | 1.25" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 25 | 000000000 | 00000 |
1.387" | 1.455" | 1.5" | 0.138" | 3.5 mm | 0.375" | 0.045" | 144° | 0.033" | 110 Copper | 10 | 000000000 | 0000 |