About Grease
More
About Lubricants
More
Electric Motor Bearing Grease
Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is more economical than synthetic-oil-based grease. Grease with polyurea thickener has excellent heat resistance and good moisture and oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote G-0010 Multi-Purpose—Polyurea Thickener | ||||||||
2 | Mineral | 14.1 | Grease Gun Cartridge | -20° to 340° | 525° | Green | 000000 | 000000 |
Mobil Polyrex EM—Polyurea Thickener | ||||||||
2 | Mineral | 13.7 | Grease Gun Cartridge | 100° to 210° | 500° | Blue | 000000 | 0000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote G-0010 Multi-Purpose—Polyurea Thickener | |||||||||
2 | Mineral | 14.1 | Grease Gun Cartridge | -20° to 340° | 525° | Green | 10 | 000000 | 0000000 |
Mobil Polyrex EM—Polyurea Thickener | |||||||||
2 | Mineral | 13.7 | Grease Gun Cartridge | 100° to 210° | 500° | Blue | 10 | 000000 | 00000 |
Moisture-Resistant Bearing Grease
Made with moisture-resistant thickeners, this grease stays in place in wet environments. It is wear resistant for use in a wide range of bearings.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease. Grease with polyurea thickener has excellent heat resistance and good oxidation resistance. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Polyurea Thickener | ||||||||||
2 | Mineral | PTFE | 0.75 fl. oz. | __ | Tube | -35° to 455° | 500° | Green | 0000000 | 00000 |
2 | Mineral | PTFE | 14.5 fl. oz. | __ | Grease Gun Cartridge | -35° to 455° | 500° | Green | 0000000 | 00000 |
2 | Mineral | PTFE | __ | 1 lbs. | Can | -35° to 455° | 500° | Green | 0000000 | 00000 |
2 | Mineral | PTFE | 1 gal. | __ | Pail | -35° to 455° | 500° | Green | 0000000 | 00000 |
2 | Mineral | PTFE | 5 gal. | __ | Pail | -35° to 455° | 500° | Green | 0000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
Polyurea Thickener | |||||||||||
2 | Mineral | PTFE | 0.75 fl. oz. | __ | Tube | -35° to 455° | 500° | Green | 24 | 00000000 | 0000000 |
2 | Mineral | PTFE | 14.5 fl. oz. | __ | Grease Gun Cartridge | -35° to 455° | 500° | Green | 16 | 00000000 | 000000 |
2 | Mineral | PTFE | __ | 1 lbs. | Can | -35° to 455° | 500° | Green | 6 | 00000000 | 000000 |
2 | Mineral | PTFE | 1 gal. | __ | Pail | -35° to 455° | 500° | Green | 6 | 00000000 | 000000 |
Adjustable-Flow Grease Dispensers
For more control over the flow rate of your grease, choose these gas-driven dispensers over spring-driven dispensers. Their continuous flow automatically adjusts based on the dispensing duration you set on their dial (from one to 12 months). Because you control when they’ll empty, these dispensers make it easy to plan maintenance. To prevent over-lubrication when your machine is down, turn the dial to zero to cut off flow without uninstalling the dispenser. They’re best for applications with consistent temperatures, so the viscosity of the grease won’t change how quickly it flows. All have a clear bowl so it's easy to monitor the grease level.
Rated IP68, these dispensers seal out dust and water from temporary submersion. They’re ATEX certified for use where explosive gases and dust could be present, such as mines and oil refineries.
Grease-filled dispensers are ready to go right out of the box, so they're faster to install. They eliminate the mess of filling and keep out contaminants because you throw them away when empty. Grease-filled dispensers also reduce the chance you’ll fill a lubrication point with the wrong grease. Grease fitting adapters let you connect these dispensers to your lubrication point if they're different.
For technical drawings and 3-D models, click on a part number.
Mobil Polyrex EM grease handles moderate loads at high speeds, so it’s a good choice for electric motor bearings in fans, pumps, and dryers. Grease with a polyurea thickener has excellent heat resistance and good moisture and oxidation resistance.
Grease Outlet (Male) | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Grease NLGI Viscosity Grade | Grease Color | Flow Rate, oz./day | Max. Grease Outlet Pressure, psi | Bowl Dia. | Overall Ht. | Thread Type | Pipe Size | Max. Distance from Lubrication Point, ft. | Specifications Met | Each | |
Mobil Polyrex EM—Polyurea Thickener | ||||||||||||
2 | 2 | Blue | 0.006-0.065 | 73 | 2 1/8" | 3 1/8" | BSPP | 1/4 | 3 | ATEX I M1 Ex ia I Ma ATEX II 1 D Ex ia IIIC T80° C Da ATEX II 1 G Ex ia IIC T6 Ga CE Marked | 0000000 | 000000 |
4 1/8 | 2 | Blue | 0.012-0.135 | 73 | 2 1/8" | 4 1/2" | BSPP | 1/4 | 3 | ATEX I M1 Ex ia I Ma ATEX II 1 D Ex ia IIIC T80° C Da ATEX II 1 G Ex ia IIC T6 Ga CE Marked | 0000000 | 00000 |
Type | Shape | Material | Connection | Each | |
Adapter | 45° Elbow | Steel | 1/4 BSPP Male × 1/4 BSPP Female | 0000000 | 000000 |
Adapter | 90° Elbow | Steel | 1/4 BSPP Male × 1/4 BSPP Female | 0000000 | 00000 |
Reducing Adapter | Straight | Steel | 1/2 BSPP Male × 1/4 BSPP Female | 0000000 | 00000 |
Reducing Adapter | Straight | Steel | 3/8 BSPP Male × 1/4 BSPP Female | 0000000 | 00000 |
ID | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | Lg. | Wd. | Ht. | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
2"-2 3/16" | 51-56 | 2 5/16" | 15/16" | 3 1/8" | Nylon Plastic | 20° to 180° | UL 2239 | 1 | 000000000 | 00000 |