Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.

Compatible with ARO-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Compatible with Schrader-shape plugs and sockets.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Compatible with Lincoln-shape plugs and sockets.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Connect your hose to a cam-and-groove vapor recovery valve.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF, also known as Kynar.

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.

Protect your hose when it’s not in use.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.

Transfer and spray water at low pressures.

The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.

Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Reels are enclosed to protect your hose when it's not in use.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Yarn reinforcement gives this hose good strength under pressure.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Adjust the flow while dispensing liquid chemicals.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Barbs grip onto tubing.

Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Made of stainless steel, these fittings have better corrosion resistance than brass fittings.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Couplings can handle pressures up to 250 psi.

Don’t get your lines crossed—use one of these couplings to quickly connect or disconnect multiple tubes at once.

Made of stainless steel, these couplings stand up to wet environments.

A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Fittings can withstand temperatures up to 200° F.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage.

A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow.

These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.

Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.

Also known as I-line fittings, these fittings have a male adapter that interlocks with a female adapter for more support than standard quick-clamp fittings.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.