These jobbers'-length bits have the rigidity and length required for most applications.

An open spiral-flute design clears chips quickly, so these bits can bore smooth, deep holes through construction lumber, railroad ties, and utility poles. Also known as pole or ship auger bits.

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.

The spear-shaped point drills smoothly through glass and ceramic.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

Cobalt steel bits are heat resistant and maintain their sharp edges when drilling hard material. They are for use in both hand-held drilling and machine-tool applications.

Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

Also known as spade bits, these have a centering point and two cutting edges for boring holes in hard and soft wood.

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

Also known as step drill bits. The 82° countersink angle is compatible with the profile of flat- and oval-head inch screws.

An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.

These countersinks have an angled hole that passes through the center of the tool to reduce vibration and chatter for creating smooth cuts and preventing chips from clogging the tool.

An angled hole passes through the center of these countersinks to reduce vibration and chatter, creating smooth cuts and preventing chips from clogging the tool.

To create a clean, smooth finish on your material, these countersinks have specially designed spiral flutes that reduce chip buildup on the cutting edge.

More heat and abrasion resistant than high-speed steel, cobalt steel has better performance on hard-to-machine materials.

More heat and abrasion resistant than high-speed steel for better performance on hard-to-machine materials.

Specially designed spiral flutes reduce chip buildup on the cutting edge, so these countersinks produce a clean, smooth finish on your material.

Often used to cut hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.

The 100° countersink angle is compatible with the profile of rivets.

These highly accurate countersinks have a tolerance of 0" to +0.001", so you can use them with computer-controlled machines.

Designed for use with computer-controlled machines, these highly accurate countersinks have a tolerance of 0" to +0.001".

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

For use on hard-to-machine materials, these countersinks are cobalt steel for better heat and abrasion resistance than high-speed steel.

For general purpose use.

These countersinks create a surface that minimizes contact between the material and the lathe centers to prevent damage and allow for more precise machining.

Carbide is harder, stronger, and more wear resistant than high-speed steel for excellent performance on hard and abrasive materials.

Use in general purpose applications.

These countersinks come attached to a high-speed steel jobbers’ bit.

For excellent performance on hard and abrasive materials, carbide is harder, stronger, and more wear resistant than high-speed steel.

Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.

The 100° countersink angle is compatible with the profile of rivets.

An angled hole passes through the center of the countersinks in these sets to reduce vibration and chatter, which creates clean cuts and prevents chips from clogging the tool.

The manually powered, angled shank lets you countersink and debur next to a shoulder and in hard-to-access holes.

Use in general purpose applications.

Choose countersinks of different sizes from these sets. Compared to countersinks with round shanks, these 1/4" hex-shank countersinks can be gripped more tightly by compatible drills and screwdrivers for greater torque.

For general purpose use.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

Use with plastic and wood.