At less than two inches in length, these cylinders actuate small devices in spots where other cylinders don’t fit.

Also known as air clamps, these cylinders are used to apply force in holding applications.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Also known as pancake cylinders, these deliver as much force as other cylinders, but with a shorter stroke to function in small spaces.

Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.

Move loads between three positions instead of two.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour.

Move grippers, printing heads, and other devices in areas constantly exposed to dust and powders as fine as flour.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.

Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.

For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length.

Cylinders have two parallel piston rods that prevent twisting as they extend and retract.

Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.

Get the power and stroke of other tie rod cylinders in less than half the space.

Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.

Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

A good choice for automated clamping, these retractors use compressed air to extend and retract a locating pin, protecting the pin from damage in applications where fixtures move through a process, such as along a conveyor belt.