Pneumatic Lifts | McMaster-Carr

Filter by

Weight Capacity

Stroke Length

Jack Type

Compressed Height

Air Spring Type

Full Stroke Lifting Force @ Pressure

Extended Height

Height

OD @ Full Stroke

Length

Hoist Sling Type

Operation Type

Beginning Stroke Lifting Force @ Pressure

Maximum Pressure

Body Material

REACH Compliance

Height @ Full Stroke

RoHS Compliance

DFARS Compliance

Air Inlet Pipe Size

Width

Lifting Speed

Clearance

Forward

How can we improve?

89 Products

Air-Powered Hydraulic Lifting Jacks with Wheels

Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.

Note: Jacks should not be moved when under load.

Warning: Never use to support people or loads over people.

For technical drawings and 3-D models, click on a part number.

Capacity				Saddle			Base						Air Inlet
tons	lbs.	Ht.	Max. Lift	Type	Movement	Dia.	Lg.	Wd.	Ht.	Handle Lg.	Air Pressure, psi	Air Hose Lg., ft.	Hose Connection Type	Pipe Size	Gender	Body Material	Wheel Material		Each
22	44,000	9 3/4"-19 1/4"	9 1/2"	Flat	Rigid	2"	22 7/8"	12 1/2"	7"	48 3/4"	110-150	3	Quick-Disconnect	1/4	Male	Steel	Plastic	00000000	0000000

Air-Powered Hydraulic Bottle Jacks

These jacks use air pressure to raise loads with less effort than other bottle jacks. They can also be operated manually.

Warning: Never use to support people or loads over people.

For technical drawings and 3-D models, click on a part number.

Capacity					Base					Air Inlet
tons	lbs.	Ht.	Max. Lift	Ram OD	Lg.	Wd.	Handle Lg.	Air Pressure, psi	Air Hose Lg., ft.	Hose Connection Type	Pipe Size	Gender	Body Material	Features		Each
12	24,000	9 1/2"-18 1/2"	9"	1 3/4"	7 7/8"	6 1/4"	24"	110-175	4	Quick-Disconnect	1/4	Male	Steel	Manual Override, Removable Handle	00000000	0000000
20	40,000	9 3/4"-18 3/4"	9"	2 1/4"	8 1/2"	7 1/8"	24"	110-175	4	Quick-Disconnect	1/4	Male	Steel	Manual Override, Removable Handle	00000000	000000
30	60,000	11"-18 1/8"	7 1/8"	2 1/2"	10 1/4"	8 1/4"	38 1/8"	110-175	4	Quick-Disconnect	1/4	Male	Steel	Manual Override, Removable Handle	00000000	000000

Air-Powered Lifting Bags

Use these rugged rubber lifting bags under heavy loads with less than 1 1/8" of clearance. They also work well on soft surfaces and under water. To increase lift height, stack with an additional bag.

Lifting Bags
Capacity				Base				Air Inlet					Replacement Bags
tons	lbs.	Ht.	Max. Lift	Lg.	Wd.	Max. Pressure, psi	Coupling Type	Pipe Size	Gender	Material		Each		Each
1.1	2,200	1 1/8"-3"	2.7"	6"	6"	116	Quick Disconnect	3/8	Male	Rubber	000000000	000000000	000000000	0000000
3.1	6,200	1 1/8"-5"	5.1"	9"	9"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	000000
6.1	12,200	1 1/8"-6 1/4"	5.9"	12"	12"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	00000000
10.8	21,600	1 1/8"-8 1/4"	7"	15"	15"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	00000000
14.2	28,400	1 1/8"-9 3/4"	8.6"	18"	18"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	00000000
22.7	45,400	1 1/8"-11 3/4"	10.6"	22"	22"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	00000000
35.3	70,600	1 3/16"-15"	14.1"	27"	27"	116	Quick Disconnect	3/8	Male	Rubber	000000000	00000000	000000000	00000000

Replacement Hose

000000000

Each

0000000

Pumps for Hydraulic Jacks

(4) Air-Powered Pump

(5) Air-Powered Pump

(6) Air-Powered Pump

Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.

Style 4, 5, and 6 pumps use air power to operate where electricity is not available and require minimal effort. Use the pedal with your hand or foot to activate and release your ram.

Warning: Never use to support people or loads over people.

For technical drawings and 3-D models, click on a part number.

				Pump								Mounting
Style	Working Orientation	Oil Capacity, cu. in.	No. of Speeds	Lg.	Wd.	Ht.	Max. Pressure, psi	Pipe Size	Thread Type	Gender	Material	Fasteners Included	No. of Holes	Hole Dia.		Each
Air
4	Horizontal	36	1	14 3/4"	5 5/8"	5 3/4"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	5/16"	00000000	000000000
5	Horizontal	90	1	10 5/8"	5 3/4"	8 1/8"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	3/8"	00000000	000000
6	Horizontal	127	1	13 5/8"	6 1/2"	8 3/8"	10,000	3/8	NPTF	Female	Aluminum, Steel	No	4	3/16"	00000000	00000000

Air-Powered Stationary Lift Tables

Bellows

Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables																Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Tabletop Ga.	Material	Air Pressure, psi	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender	Elevation Speed, in./sec.	Hose Lg., ft.	Control Cord Lg., ft.	Specifications Met		Each		Each
550	32"	19 1/2"	6"-28"	13	Steel	40	1/4	NPT	Female	1/2	6	6	ANSI MH 29.1	0000000	000000000	0000000	0000000
660	40"	20"	9 1/2"-54"	10	Steel	40	1/4	NPT	Female	3/4	6	6	ANSI MH 29.1	0000000	00000000	0000000	00000000
1,100	40"	20"	6"-31 1/2"	10	Steel	40	1/4	NPT	Female	1/2	6	6	ANSI MH 29.1	0000000	00000000	0000000	000000

Design-Your-Own Stationary Air-Lift Tables

Choose your table based on capacity, then choose the type of control that best suit your application. You'll also need a tabletop. No hydraulics, motors, or pumps to maintain and no electrical connection required, just connect these tables to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Frame

Frame

Capacity, lbs.	Lg.	Wd.	Ht.	Frame Ga.	Material	Air Pressure, psi	Flow Rate	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender		Each
1,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	000000000
2,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	00000000
3,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	00000000

Lift Table Bellows

Bellows

Ht.	Material	Frame Material	Flexibility	Color	Protects Against	Mounting Fasteners Included		Each
7"-32"	Vinyl Fabric	Plastic	Flexible	Black/Yellow	Abrasive Grit, Coolant, Debris, Dust, Metal Chips, Oil, Salt Water, Wood Chips	No	000000	000000000

Stationary Air-Lift Tables

Bellows

Tables come ready to operate with no hydraulics, motors, or pumps to maintain and no electrical connection required. These tables connect to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables													Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Tabletop Ga.	Material	Air Pressure, psi	Flow Rate	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender		Each		Each
2,000	48"	48"	8"-32"	3	Steel	80	15 cfm @ 80 psi	1/4	NPT	Female	00000000	000000000	0000000	000000000
4,000	48"	48"	8"-32"	3	Steel	80	15 cfm @ 80 psi	1/4	NPT	Female	00000000	00000000	0000000	00000000

Air-Powered Wire Rope Hoists

These hoists are quieter and more stable than air-powered chain hoists. Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting. The gears are enclosed to protect them from debris and contamination for smooth operation.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lift Lg., ft.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Wire Rope Dia.		Each
Cast Iron with Enclosed Gears
1/8	300	7	36	23"	7/8"	NPT	3/8	21.2 cfm @ 90 psi	Continuous Use	5/32"	0000000	000000000

Air-Powered Chain Hoists

CM Budgit with Lever Control

CM Budgit with Pull Control

Harrington TCR with Lever Control

Harrington TCR with Pull Control

Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.

Hoists with overload protection will not operate when the load exceeds capacity.

Cast iron hoists have a durable housing for longer life than aluminum hoists.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum with Chain Container
CM Budgit 2200 with Lever Control
1/4	500	65	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	000000000	000000000	000000000
1/2	1,000	45	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
1	2,000	23	18"	1 1/4"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
CM Budgit 2200 with Pull Control
1/4	500	65	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
1/2	1,000	45	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
CM Budgit 6000 with Lever Control
2	4,000	15	22"	1 3/8"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
Cast Iron with Chain Container and Overload Protection
Harrington TCR with Lever Control
1/4	500	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1/2	1,000	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1	2,000	37	19"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
2	4,000	19	22"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
Harrington TCR with Pull Control
1/4	500	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1/2	1,000	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1	2,000	37	19"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
2	4,000	19	22"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000

Spark-Resistant Air-Powered Chain Hoists

With Pull Control

With Lever Control

These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance. They have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.

Hoists with overload protection will not operate when the load exceeds capacity.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum
CM Budgit 2200 with Pull Lever
3/8	750	60	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	000000000	000000000	000000000
Aluminum with Overload Protection
CM Budgit 6000 with Lever
1/2	1,000	16	17"	1 1/4"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
1	2,000	8	22"	1 1/4"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	000000000

Variable-Speed Precise-Positioning Compact Air-Powered Chain Hoists

Change or hold the speed at any time during operation so you can start the hoist softly and gradually decelerate. They are small and lightweight so you can easily move them between jobs. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting, and overload protection prevents hoists from operating if the load exceeds capacity.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Hoists

Chain Hoist

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum with Chain Container and Overload Protection
CM ShopAir
0.15	300	31	11"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	000000000	000000000	000000000
1/4	500	21	11"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
0.3	600	16	12"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
1/2	1,000	11	12"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000

Motor Repair Kits

Motor Repair Kit

For Inlet Thread Type	For Inlet Pipe Size		Each
NPT	3/8	0000000	0000000

Replacement Latch Kits

Replacement Latch Kit

For Inlet Thread Type	For Inlet Pipe Size		Each
NPT	3/8	0000000	000000

Replacement Control Tubes & Pendant Throttle Controls

Replacement Control
Tube & Pendant
Throttle Control

For Lift Lg., ft.		Each
10	0000000	000000000
15	0000000	00000000
20	0000000	00000000

Heavy Duty Air-Powered Winches for Wire Rope—For Lifting

These winches operate longer and require shorter breaks than standard air-powered winches. Because they run on compressed air, they give you longer operating times than electric winches. They have an automatic brake that holds the load when the motor stops. To lift, mount winches above the load, or use winches with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

												Inlet
Max. Cap., lbs.	Fully Wound Cap., lbs.	Min. Line Speed, fpm	For Max. Rope Lg., ft.	For Rope Dia.	O'all Wd.	O'all Lg.	O'all Ht.	Material	Rope with Hook Included	Air Hose Included	Air Consumption @ Pressure	Gender	Thread Type	Pipe Size	Features		Each
30 Minutes On, 10 Minutes Off
1,500	1,000	40	170	1/4"	17 1/2"	21 1/2"	12 1/2"	Aluminum, Steel	No	No	100 cfm @ 90 psi	Female	NPT	1/2	Reversible Pulling Directions	0000000	000000000

Air-Powered Winches for Wire Rope—For Lifting

Because this winch runs on compressed air, it gives you a longer operating time than electric winches. It has an automatic brake that holds the load when the motor stops. To lift, mount winch above the load, or use winch with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

												Inlet
Max. Cap., lbs.	Fully Wound Cap., lbs.	Min. Line Speed, fpm	For Max. Rope Lg., ft.	For Rope Dia.	O'all Wd.	O'all Lg.	O'all Ht.	Material	Rope with Hook Included	Air Hose Included	Air Consumption @ Pressure	Gender	Thread Type	Pipe Size	Features		Each
15 Minutes On, 45 Minutes Off
2,000	1,200	13	90	5/16"	8 7/8"	14 3/8"	15"	Aluminum, Steel	No	No	80 cfm @ 100 psi	Female	NPT	1/2	Reversible Pulling Directions	00000000	000000000

Adjustable Air Springs

Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application. They’re often used with vibratory screen and conveyors; loading and transfer stations; and sensitive testing and measuring equipment. Do not extend beyond height at full stroke.

Miniature Sleeve

									Air Inlet			Mount. Hole		Mount. Stud
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Thread Size	Dp.	Thread Size	Lg.		Each
4.6"	1.5"	2.1"	3.6"	10 lbs. @ 20 psi 40 lbs. @ 60 psi 120 lbs. @ 100 psi	120 lbs. @ 20 psi 360 lbs. @ 60 psi 600 lbs. @ 100 psi	3.6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	5/16"-18	7/16"	5/8"-11	1"	0000000	000000

Sleeve

									Air Inlet			Mount. Hole
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Thread Size	Dp.		Each
6.88"	2.2"	4"	6.25"	140 lbs. @ 20 psi 320 lbs. @ 60 psi 560 lbs. @ 100 psi	250 lbs. @ 20 psi 700 lbs. @ 60 psi 1,250 lbs. @ 100 psi	5.6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	3/8"-16	1/2"	0000000	0000000
7.73"	2.2"	4.9"	7.1"	80 lbs. @ 20 psi 180 lbs. @ 60 psi 310 lbs. @ 100 psi	340 lbs. @ 20 psi 700 lbs. @ 60 psi 1,100 lbs. @ 100 psi	4.6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	3/8"-16	1/2"	0000000	000000
8.72"	3.6"	4.4"	8"	40 lbs. @ 20 psi 60 lbs. @ 60 psi 110 lbs. @ 100 psi	60 lbs. @ 20 psi 200 lbs. @ 60 psi 360 lbs. @ 100 psi	3.25"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	1/2"-13	5/8"	0000000	000000
10.21"	4"	5.5"	9.5"	160 lbs. @ 20 psi 500 lbs. @ 60 psi 800 lbs. @ 100 psi	190 lbs. @ 20 psi 540 lbs. @ 60 psi 950 lbs. @ 100 psi	5.7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	1/2"-13	5/8"	0000000	000000
11.21"	4"	6.5"	10.5"	140 lbs. @ 20 psi 340 lbs. @ 60 psi 540 lbs. @ 100 psi	170 lbs. @ 20 psi 520 lbs. @ 60 psi 850 lbs. @ 100 psi	4.6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	1/2"-13	5/8"	0000000	000000
11.21"	4"	6.5"	10.5"	180 lbs. @ 20 psi 460 lbs. @ 60 psi 750 lbs. @ 100 psi	230 lbs. @ 20 psi 660 lbs. @ 60 psi 1,100 lbs. @ 100 psi	5.6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	1/2"-13	5/8"	0000000	000000
12"	4.1"	6.8"	10.9"	240 lbs. @ 20 psi 700 lbs. @ 60 psi 1,200 lbs. @ 100 psi	420 lbs. @ 20 psi 1,100 lbs. @ 60 psi 2,000 lbs. @ 100 psi	7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/8	__	__	0000000	000000

Single Tire

									Air Inlet			Mount. Hole
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Ctr.-to-Ctr.	Thread Size	Dp.		Each
3.8"	1.8"	2"	3.8"	60 lbs. @ 20 psi 280 lbs. @ 60 psi 560 lbs. @ 100 psi	280 lbs. @ 20 psi 900 lbs. @ 60 psi 1,500 lbs. @ 100 psi	5.7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	0000000
4.8"	1.8"	3"	4.8"	30 lbs. @ 20 psi 260 lbs. @ 60 psi 520 lbs. @ 100 psi	320 lbs. @ 20 psi 950 lbs. @ 60 psi 1,600 lbs. @ 100 psi	6"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	000000
4.8"	2"	2.8"	4.8"	60 lbs. @ 20 psi 440 lbs. @ 60 psi 850 lbs. @ 100 psi	420 lbs. @ 20 psi 1,200 lbs. @ 60 psi 2,000 lbs. @ 100 psi	6.5"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	000000
5.2"	2"	3.2"	5.2"	100 lbs. @ 20 psi 350 lbs. @ 60 psi 850 lbs. @ 100 psi	500 lbs. @ 20 psi 1,500 lbs. @ 60 psi 2,600 lbs. @ 100 psi	7.7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	000000
5.2"	3.2"	2"	5.9"	280 lbs. @ 20 psi 850 lbs. @ 60 psi 1,500 lbs. @ 100 psi	900 lbs. @ 20 psi 2,900 lbs. @ 60 psi 4,900 lbs. @ 100 psi	11"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	3 1/2"	3/8"-16	5/8"	0000000	000000
5.3"	2"	3.3"	5.3"	100 lbs. @ 20 psi 550 lbs. @ 60 psi 1,100 lbs. @ 100 psi	660 lbs. @ 20 psi 2,100 lbs. @ 60 psi 3,600 lbs. @ 100 psi	8.7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	2 3/4"	3/8"-16	5/8"	0000000	000000
5.3"	2.3"	3"	5.9"	280 lbs. @ 20 psi 850 lbs. @ 60 psi 1,500 lbs. @ 100 psi	1,100 lbs. @ 20 psi 3,300 lbs. @ 60 psi 5,600 lbs. @ 100 psi	11"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	3 1/2"	3/8"-16	5/8"	0000000	000000
5.4"	2"	3.4"	7.1"	10 lbs. @ 20 psi 300 lbs. @ 60 psi 750 lbs. @ 100 psi	750 lbs. @ 20 psi 1,800 lbs. @ 60 psi 3,000 lbs. @ 100 psi	7"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	000000
5.6"	2.6"	3"	7.2"	440 lbs. @ 20 psi 1,800 lbs. @ 60 psi 3,600 lbs. @ 100 psi	1,700 lbs. @ 20 psi 5,100 lbs. @ 60 psi 8,800 lbs. @ 100 psi	13.2"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	6.2"	3/8"-16	5/8"	0000000	000000

Inflation Valve

0000000

Each

000000

Double Tire

									Air Inlet			Mount. Hole
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Ctr.-to-Ctr.	Thread Size	Dp.		Each
7.1"	2.8"	4.3"	7.7"	0 lbs. @ 20 psi 220 lbs. @ 60 psi 580 lbs. @ 100 psi	750 lbs. @ 20 psi 1,700 lbs. @ 60 psi 2,800 lbs. @ 100 psi	6.5"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	1 3/4"	3/8"-16	5/8"	0000000	0000000
9.5"	2.9"	6.6"	10.1"	30 lbs. @ 20 psi 450 lbs. @ 60 psi 1,000 lbs. @ 100 psi	1,200 lbs. @ 20 psi 3,100 lbs. @ 60 psi 5,000 lbs. @ 100 psi	8.8"	-20° to 135°	Neoprene Rubber	NPTF	Female	1/4	2 3/4"	3/8"-16	5/8"	0000000	000000
9.5"	3.2"	6.3"	10.8"	20 lbs. @ 20 psi 400 lbs. @ 60 psi 1,100 lbs. @ 100 psi	1,000 lbs. @ 20 psi 3,300 lbs. @ 60 psi 5,700 lbs. @ 100 psi	10.3"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	3 1/2"	3/8"-16	5/8"	0000000	000000
9.5"	3.4"	6.1"	11.1"	240 lbs. @ 20 psi 1,200 lbs. @ 60 psi 2,700 lbs. @ 100 psi	1,600 lbs. @ 20 psi 5,500 lbs. @ 60 psi 9,400 lbs. @ 100 psi	13"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	6.2"	3/8"-16	5/8"	0000000	000000
10.7"	3.5"	7.2"	12.2"	120 lbs. @ 20 psi 800 lbs. @ 60 psi 1,500 lbs. @ 100 psi	1,250 lbs. @ 20 psi 3,600 lbs. @ 60 psi 6,000 lbs. @ 100 psi	10.3"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	3 1/2"	3/8"-16	5/8"	0000000	000000
12.7"	4.3"	8.4"	14.4"	70 lbs. @ 20 psi 1,150 lbs. @ 60 psi 2,600 lbs. @ 100 psi	1,800 lbs. @ 20 psi 5,800 lbs. @ 60 psi 10,000 lbs. @ 100 psi	13.7"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	6.2"	3/8"-16	5/8"	0000000	000000

Inflation Valve

0000000

Each

000000

Triple Tire

									Air Inlet			Mount. Holes
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Ctr.-to-Ctr.	Thread Size	Dp.		Each
15.2"	5"	10.2"	18"	80 lbs. @ 20 psi 1,900 lbs. @ 60 psi 4,700 lbs. @ 100 psi	2,600 lbs. @ 20 psi 8,100 lbs. @ 60 psi 15,000 lbs. @ 100 psi	15.5"	-56° to 135°	Natural Rubber	NPTF	Female	1/4	6 1/4"	3/8"-16	5/8"	0000000	0000000

Inflation Valve

0000000

Each

000000