About Torque Tools
More
Air-Powered Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/574/57485a11p1-a07a-digital@halfx_637098935182529028.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/575/57555a21p1-a07a-digital@halfx_637098874350270395.png?ver=imagenotfound)
Connect these tools to your shop air to install and remove fasteners.
Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.
Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Power Source | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Positive Clutch Drive | ||||||||||||||
Variable | 1,800 | 115 | 1/4" | 7 3/4" | 2.9 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Direct Drive | ||||||||||||||
Variable | 1,800 | 125 | 1/4" | 7" | 2.3 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 000000 |
1 | 2,200 | 64.8 | 1/4" | 6 1/4" | 2.3 | Air | 90 | 2.5 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Air-Powered Torque Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/576/5767a59-@halfx_637824291071893220.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/702/7029a32p1-a07a-digital@halfx_637098658916077812.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/576/5767a51p1-a07a-digital@halfx_637098940589783102.png?ver=imagenotfound)
Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Torque Range, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Clutch Slips Torque Limiter | |||||||||||||
Trigger Speed Control | |||||||||||||
Variable | 800 | 55-100 | 1/4" | 9" | 3 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Variable | 900 | 13-70 | 1/4" | 9 1/2" | 2.9 | 90 | 17 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
Push-to-Start Speed Control | |||||||||||||
1 | 1,000 | 1.5-30 | 1/4" | 8 3/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Lever Speed Control | |||||||||||||
Variable | 1,000 | 1.5-30 | 1/4" | 9 1/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 45-70 | 1/4" | 9 1/2" | 1.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Variable | 2,100 | 13-40 | 1/4" | 10" | 2.6 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
High-Precision Air-Powered Torque Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/592/5925a12p1-a07a-digital@halfx_637099006356155787.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/592/5925a14-@halfx_637232257762744176.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/592/5925a18p1-a07a-digital@halfx_637098795702140579.png?ver=imagenotfound)
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | Number of Speeds | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Motor Stops Torque Limiter | |||||||||||||
Push-to-Start Speed Control | |||||||||||||
800 | 14.1-35.2 | 1 | 1/4" | 8 1/4" | 1.4 | 85 | 10.5 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000000 |
1,000 | 3.1-9.7 | 1 | 1/4" | 7 1/8" | 0.7 | 85 | 5.6 cfm @ 85 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 3.5-18.5 | 1 | 1/4" | 7 1/4" | 0.9 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Lever Speed Control | |||||||||||||
1,100 | 3.5-17.4 | 1 | 1/4" | 8 1/4" | 1.2 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 9.7-18.5 | 1 | 1/4" | 10 3/4" | 1.5 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Air-Powered Impact Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/286/2869n11p1-a07a-digital@halfx_637098874825474355.png?ver=imagenotfound)
Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed | Torque Range, in.-lbs. | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Pistol Grip | ||||||||||||||
in.-lbs. | ||||||||||||||
Variable | 10,000 rpm | 120-840 | Clockwise and Counterclockwise | 1/4" | 6 5/16" | 2.1 | 90 psi | 2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Light Duty Air-Powered Impact Wrenches
These tools are suitable for general shop, maintenance, and automotive work. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Ring-style socket retainer allows quick socket changes—pull the socket off the retainer and push on another one.
Ring-and-hole style socket retainer (also called positive locking) provides a more secure hold than ring-style retainers and requires a retaining ring.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/717/7176a18p1-a07a-digital@halfx_636954342767101323.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7182a15p1-a07a-digital@halfx_636954515157026137.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/5828a13p1-a07a-digital@halfx_636954442533839765.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/712/71205a33p1-a07a-digital@halfx_636954511316154300.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/717/7176a54p1-a07a-digital@halfx_636954518904341163.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a32-1581002406-p9@halfx_637165776198254272.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a331581002983-p9@halfx_637165782221787010.png?ver=imagenotfound)
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Includes | Each | ||
1/4" Square Drive | ||||||||||||||
A | 55 | 1 | 14,500 | Not Rated | 1/4 | NPT | Female | 3/8" | 6 7/8" | 1 1/2 | Ring | 1/4" Square Drive Size Sockets (Inch): 3/16", 1/4", 3/8", 1/2", 9/16" 1/4" Square Drive Size Sockets (Metric): 4 mm, 6 mm, 10 mm, 12 mm, 14 mm | 0000000 | 0000000 |
3/8" Square Drive | ||||||||||||||
B | 90 | 4 | 9,500 | 3.2 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 6 3/8" | 2.1 | Ring | __ | 0000000 | 000000 |
C | 180 | 1 | 10,000 | 2.5 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6" | 2.9 | Ring | __ | 0000000 | 000000 |
D | 332 | 3 | 11,500 | 32 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 7" | 2.6 | Ring | __ | 0000000 | 000000 |
1/2" Square Drive | ||||||||||||||
C | 600 | 1 | 8,000 | 4.2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 5.8 | Ring | __ | 0000000 | 000000 |
D | 425 | 4 | 8,400 | 15 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 7 1/2" | 5.1 | Ring | __ | 00000000 | 000000 |
3/4" Square Drive | ||||||||||||||
C | 1,050 | 1 | 6,000 | 8 cfm @ 90 psi | 3/8 | NPT | Female | 3/8" | 8 5/8" | 8.8 | Ring | __ | 00000000 | 000000 |
1" Square Drive | ||||||||||||||
E | 1,450 | 1 | 5,000 | 10 cfm @ 90 psi | 1/2 | NPT | Female | 1/2" | 10 1/2" | 22 | Ring and Hole | __ | 0000000 | 000000 |
Heavy Duty Air-Powered Impact Wrenches
![]() A | ![]() B | ![]() C |
![]() Pin-Style Socket Retainer | ![]() Hole-Style Socket Retainer |
Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications. They have a positive-locking socket retainer that provides a secure hold. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Pin-style socket retainer has a pin that fits into a matching hole in the socket.
Hole-style socket retainer requires a retaining ring (included).
Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Retaining Ring Required | Features | Each | ||
1/2" Square Drive | |||||||||||||||
A | 500 | 1 | 5,000 | 3.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6 7/8" | 6 | Pin | No | Built-In Lubrication System | 0000000 | 000000000 |
3/4" Square Drive | |||||||||||||||
A | 1,600 | 1 | 5,200 | 15 cfm @ 90 psi | 3/8 | NPT | Female | 1/2" | 8 7/8" | 11.9 | Hole | Yes | __ | 0000000 | 00000000 |
1" Square Drive | |||||||||||||||
A | 1,450 | 1 | 5,200 | 6 cfm @ 90 psi | 1/2 | NPT | Female | 1/2" | 8 7/8" | 11.4 | Hole | Yes | __ | 0000000 | 00000000 |
B | 2,000 | 1 | 5,000 | 10 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 12 1/4" | 22 | Hole | Yes | Adjustable Side Handle Built-In Lubrication System | 0000000 | 00000000 |
1 1/2" Square Drive | |||||||||||||||
C | 3,600 | 1 | 3,500 | 15 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 16 1/2" | 34 1/2 | Hole | Yes | Adjustable Side Handle | 00000000 | 00000000 |
Standard Duty Air-Powered Impact Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/717/7177a34-@halfx_f0ruh_1712695296.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/717/7176a13p1-a07a-digital@halfx_636954423935988442.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/716/71655a47-@halfx_p2mwv_1717426750.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/550/55055a75-@halfx_1686316420.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a32-1581002406-p9@halfx_637165776198254272.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a31c11581000197-p9@halfx_637165754324208526.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/578/57855a42c11581002765-p9@halfx_637165779757101130.png?ver=imagenotfound)
Use these wrenches for medium-volume production, general maintenance, and construction applications. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Ring-style socket retainer allows quick socket changes—pull the socket off the retainer and push on another one.
Pin-, and hole-style socket retainers (also called positive locking) provide a more secure hold than ring-style retainers. Pin-style retainer has a pin that fits into a matching hole in the socket. Hole-style retainer requires a retaining ring.
Wrenches | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Replacement Socket Retainer Kits | ||||||||||||||
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Each | Each | |||
3/8" Square Drive | |||||||||||||||
A | 250 | 1 | 15,000 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6" | 2 1/2 | Ring | 0000000 | 0000000 | 0000000 | 00000 |
1/2" Square Drive | |||||||||||||||
B | 400 | 1 | 8,500 | 5.4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6 3/4" | 5.6 | Pin | 0000000 | 000000 | 0000000 | 00000 |
C | 1,500 | 1 | 7,500 | 9 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 4.4 | Ring | 00000000 | 000000 | 00000000 | 0000 |
3/4" Square Drive | |||||||||||||||
A | 2,000 | 1 | 5,500 | 36 cfm @ 90 psi | 3/8 | NPT | Female | 1/2" | 8 1/2" | 7.8 | Hole | 0000000 | 000000 | 0000000 | 00000 |
1" Square Drive | |||||||||||||||
D | 2,000 | Variable | 5,000 | 6.2 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 19.2" | 17.86 | Ring | 00000000 | 00000000 | 000000 | 00 |
Standard Duty Air-Powered Ratchet Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/730/7305a41p1-a07a-digital@halfx_636954390357348552.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/694/6949a65p1-a07a-digital@halfx_636954403701203943.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/694/6949a61p1-a07a-digital@halfx_636954519917969436.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/694/6949a67p1-a07a-digital@halfx_636954468112457270.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a31c21581000055-p9@halfx_637165753870446227.png?ver=imagenotfound)
Use these tools for general shop applications. They have a ball-detent-style socket retainer that allows quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise direction. Air-powered tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | For Socket Drive Type | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | ||
1/4" Square Drive | |||||||||||||
A | 25 | Impact, Nonimpact Power | 1 | 250 | 3 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 0000000 |
A | 30 | Impact, Nonimpact Power | 1 | 330 | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 000000 |
3/8" Square Drive | |||||||||||||
A | 54 | Impact, Nonimpact Power | 1 | 160 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 3/4" | 2.8 | 0000000 | 000000 |
B | 30 | Impact, Nonimpact Power | 1 | 330 | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 000000 |
C | 76 | Impact, Nonimpact Power | 1 | 220 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 12" | 3.3 | 0000000 | 000000 |
D | 90 | Impact | 1 | 190 | 5 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 12" | 2.7 | 0000000 | 000000 |
1/2" Square Drive | |||||||||||||
A | 54 | Impact, Nonimpact Power | 1 | 160 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 7/8" | 2.8 | 0000000 | 000000 |
D | 110 | Impact, Nonimpact Power | 1 | 180 | 3.25 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 1/4" | 2.8 | 0000000 | 000000 |
Heavy Duty Air-Powered Ratchet Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/139/1392a11-@halfx_1686316413.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a31c21581000055-p9@halfx_637165753870446227.png?ver=imagenotfound)
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications. They have a ball-detent-style socket retainer that allows quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise direction. Air-powered tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | For Socket Drive Type | No. of Speeds | Max. No-Load Speed, rpm | Speed Control | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | |
1/4" Square Drive | |||||||||||||
40 | Impact | Variable | 270 | Lever | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 8 1/8" | 1.46 | 0000000 | 0000000 |
3/8" Square Drive | |||||||||||||
40 | Impact | Variable | 270 | Lever | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 8 1/8" | 1.46 | 0000000 | 000000 |
80 | Impact | 1 | 280 | Push Button | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 7/8" | 2.73 | 0000000 | 000000 |
Torque-Limiting Air-Powered Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/113/1132a11p1-a07a-digital@halfx_636954340954965932.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/113/1132a1p1-a07a-digital@halfx_636954356859298228.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/718/7184a31c11581000197-p9@halfx_637165754324208526.png?ver=imagenotfound)
Set torque and the wrench will prevent you from exceeding it. Also known as nutrunners, these tools are commonly used in assembly applications. They have a pin-style (also called positive locking) socket retainer that fits into a matching hole in the socket and provides a secure hold. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | Torque-Limiting Mechanism | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | |
1/4" Square Drive | ||||||||||||
3.8 | Motor Stops | 1 | 700 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 12 1/2" | 1.8 | 0000000 | 000000000 |
3/8" Square Drive | ||||||||||||
9.16 | Clutch Disengages | 1 | 600 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 13 1/4" | 3.4 | 000000 | 00000000 |
Heavy Duty Air-Powered Drills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3130a33p1-a02b-digital@halfx_637049328085260569.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3130a29-@halfx_637153913023014563.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3131a12-@halfx_637153912672672165.png?ver=imagenotfound)
Rated for continuous use, these tools take on your tough drilling jobs. They have heavy duty bearings and hardened steel gears. All have a keyed chuck that can be tightened with the included key.
Style B have a variable speed that lets you set the motor speed at less than the maximum no-load speed.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
A | 1/4" | 4,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 3/32" | 2.5 | 0000000 | 0000000 |
B | 1/4" | 4,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 9 5/16" | 2.5 | 0000000 | 000000 |
B | 3/8" | 1,200 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 10 13/16" | 3 | 0000000 | 000000 |
C | 1/2" | 550 | Clockwise | Keyed | 1 | 8 cfm @ 90 psi | 1/4 | NPT | Female | Side | 13 3/8" | 7 | 0000000 | 00000000 |
Light Duty Air-Powered Drills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a17p1-a02b-digital@halfx_637049321210908101.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a22p1-a02b-digital@halfx_637049323831270209.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a12p1-a02b-digital@halfx_637049322245667614.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/281/28105a26p1-a02b-digital@halfx_637049322310741756.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a14p1-a02b-digital@halfx_637049330640180316.png?ver=imagenotfound)
Designed for intermittent use.
Drills with keyed chuck can be tightened with the included key.
Drills with keyless chuck open and close without a key for fast bit changes.
Styles E, F, and G have a lever throttle with a lock to prevent accidental starts.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
A | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 1/2" | 2.5 | 00000000 | 000000 |
B | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyless | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 1/2" | 2.5 | 00000000 | 000000 |
C | 3/8" | 20,000 | Clockwise | Keyed | 0.33 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Front | 5" | 2 | 00000000 | 000000 |
D | 1/2" | 840 | Clockwise and Counterclockwise | Keyed | 1/2 | 6.9 cfm @ 90 psi | 1/4 | NPT | Female | Handle | 10 3/8" | 3.1 | 00000000 | 000000 |
E | 3/8" | 20,000 | Clockwise | Keyed | 0.48 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Front | 6 1/2" | 2 | 00000000 | 00000 |
Heavy Duty Air-Powered Drills for Threaded-Shank Drill Bits
![](/prerenderstable/mvPRE/contents/gfx/imagecache/299/29955a21c1-a02b-digital-master1579888935-p9@halfx_637154641666303742.png?ver=imagenotfound)
These drills have a threaded spindle instead of a drill chuck for use with threaded-shank drill bits (sold separately). Rated for continuous use, they have heavy duty bearings and hardened steel gears.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Shank Thread Size | Max. No-Load Speed, rpm | Drive Direction | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | |
1/4"-28 | 2,400 | Clockwise | 2/5 | 22 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 11 3/32" | 2 | 00000000 | 000000000 |
1/4"-28 | 5,300 | Clockwise | 2/5 | 22 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 10 11/16" | 2 | 00000000 | 00000000 |
Medium Duty Air-Powered Drills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/284/28495a11p1-a02b-digital@halfx_637049329044454271.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/280/2803a13p1-a02b-digital@halfx_637049315408052855.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a18-@halfx_637153919205365695.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/277/27755a211579816170-p9@halfx_637153918813725524.png?ver=imagenotfound)
More durable than our light duty drills, these are excellent for general purpose drilling jobs. All have a keyed chuck that can be tightened with the included key.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Bit Shank Size | Max. No-Load Speed, rpm | Drive Direction | Chuck Type | Power, hp | Average Air Consumption | Pipe Size | Thread Type | Gender | Exhaust Location | O'all Lg. | Wt., lbs. | Each | ||
A | 3/8" | 2,000 | Clockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 13/16" | 2.5 | 00000000 | 0000000 |
A | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1/2 | 4 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 6 3/8" | 2.5 | 00000000 | 000000 |
B | 3/8" | 2,000 | Clockwise and Counterclockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7 19/32" | 3 | 0000000 | 000000 |
B | 3/8" | 2,600 | Clockwise | Keyed | 1 | 7.5 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7" | 2.5 | 0000000 | 000000 |
C | 1/2" | 800 | Clockwise and Counterclockwise | Keyed | 1/2 | 6 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 8 1/2" | 3.5 | 00000000 | 000000 |
D | 3/8" | 1,800 | Clockwise and Counterclockwise | Keyed | 1/2 | 4.6 cfm @ 90 psi | 1/4 | NPT | Female | Rear | 7" | 2.5 | 00000000 | 000000 |
Air-Powered Tap Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/352/3526n11-@halfx_637110557715144468.png?ver=imagenotfound)
Powered by compressed air, these tap wrenches thread holes faster and with less effort than manual tap wrenches. They’re often used in place of manual tap wrenches when threading many holes and hard materials. Compared to drill presses and CNC machines, which are stationary, these wrenches are portable so you can take them to the part that needs to be threaded. To remove chips from your hole, press the reverse button to rotate the tap counterclockwise. Switch different taps in and out of the chuck when your tap is worn down or you need a new size. Use with machine tool taps and tapping lubricants for best results.
Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap Size | For Square Shank Size | Max. Torque, in.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Exhaust Location | Lg. | Wt., lbs. | Each | |
No. 10, No. 12, 1/4", 5/16", M5, M6, M7, M8 | 0.191"-0.313" | 400 | 1 | 300 | 90 | 30 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | Handle | 7 1/4" | 2.9 | 0000000 | 0000000 |
1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M9, M10, M11, M12, M13 | 0.25"-0.5" | 400 | 1 | 300 | 90 | 30 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | Handle | 7 1/4" | 2.9 | 0000000 | 000000 |