Press-Fit Captive-Panel Retractable Spring Plungers
Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Pull the knob to withdraw the pin from inner panel. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.32" | 0.249" | Nickel-Plated Steel | 000000000 | 00000 |
Twist-to-Lock Press-Fit Captive-Panel Retractable Spring Plungers
Lock the nose in the retracted position by pulling the knob and rotating it 90°. Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Dia. | Lg. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.249" | 0.32" | Nickel-Plated Steel | 000000000 | 00000 |
Press-Fit Ball-Nose Spring Plungers
Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed. These spring plungers have a tapered end and smooth body to make them easy to press into unthreaded holes in soft material such as wood, plastic, and aluminum. Drill a slightly smaller hole for a snug fit.
Steel is strong and wear resistant.
Stainless steel is chemical resistant and may be mildly magnetic.
Plastic is chemical resistant and lightweight; plastic noses are extra soft to minimize marring soft surfaces such as aluminum.
Brass is corrosion resistant in wet environments.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Body | Nose | Flange | Nose Force, lbs. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Extended Lg. | Dia. | Temp. Range, °F | Dia. | Thick. | Extended | Compressed | Each | |
Steel Body | ||||||||||
400 Series Stainless Steel Nose  | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.093" | __ | 0.187" | 0.032" | 2 | 5 | 00000000 | 00000 |
| 0.125" | 0.252" | 0.035" | 0.094" | __ | 0.187" | 0.032" | 0.4 | 1.3 | 00000000 | 0000 |
| 0.125" | 0.252" | 0.035" | 0.094" | __ | 0.187" | 0.032" | 0.8 | 2.5 | 00000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 1.5 | 3.5 | 00000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 3 | 7.5 | 00000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | __ | 0.25" | 0.04" | 1 | 2.5 | 00000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | __ | 0.25" | 0.04" | 2 | 5 | 00000000 | 0000 |
| 0.188" | 0.405" | 0.058" | 0.156" | __ | 0.25" | 0.035" | 4 | 10 | 00000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | __ | 0.312" | 0.045" | 1.5 | 3.5 | 00000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | __ | 0.312" | 0.045" | 3 | 7 | 00000000 | 0000 |
| 0.25" | 0.481" | 0.07" | 0.187" | __ | 0.312" | 0.044" | 6 | 13 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 2 | 5 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 4 | 10 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 8 | 16 | 00000000 | 0000 |
| 0.375" | 0.785" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 10 | 18 | 00000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 2.5 | 7 | 00000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 5 | 14 | 00000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | __ | 0.688" | 0.11" | 4 | 9 | 00000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | __ | 0.688" | 0.11" | 8 | 18 | 00000000 | 0000 |
| 0.5" | 1.13" | 0.161" | 0.437" | __ | 0.688" | 0.088" | 12 | 23 | 00000000 | 0000 |
Acetal Plastic Nose | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.093" | __ | 0.187" | 0.032" | 2 | 5 | 000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 1.5 | 3.5 | 0000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 3 | 7.5 | 0000000 | 0000 |
| 0.188" | 0.405" | 0.058" | 0.156" | __ | 0.25" | 0.035" | 4 | 10 | 0000000 | 0000 |
| 0.25" | 0.481" | 0.07" | 0.187" | __ | 0.312" | 0.044" | 6 | 13 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 8 | 16 | 0000000 | 0000 |
| 0.375" | 0.785" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 10 | 18 | 0000000 | 0000 |
| 0.5" | 1.13" | 0.161" | 0.437" | __ | 0.688" | 0.088" | 12 | 23 | 0000000 | 0000 |
Nylon Plastic Nose | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.094" | -20° to 180° | 0.187" | 0.032" | 0.4 | 1.3 | 0000000 | 0000 |
| 0.125" | 0.252" | 0.035" | 0.094" | -20° to 180° | 0.187" | 0.032" | 0.8 | 2.5 | 0000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | -20° to 180° | 0.25" | 0.04" | 1 | 2.5 | 0000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | -20° to 180° | 0.25" | 0.04" | 2 | 5 | 0000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | -20° to 180° | 0.312" | 0.045" | 1.5 | 3.5 | 0000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | -20° to 180° | 0.312" | 0.045" | 3 | 7 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | -20° to 180° | 0.375" | 0.045" | 2 | 5 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | -20° to 180° | 0.375" | 0.045" | 4 | 10 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | -20° to 180° | 0.5" | 0.078" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | -20° to 180° | 0.5" | 0.078" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | -20° to 180° | 0.688" | 0.11" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | -20° to 180° | 0.688" | 0.11" | 8 | 18 | 0000000 | 0000 |
18-8 Stainless Steel Body | ||||||||||
400 Series Stainless Steel Nose | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.093" | __ | 0.187" | 0.032" | 2 | 5 | 00000000 | 0000 |
| 0.125" | 0.252" | 0.035" | 0.094" | __ | 0.187" | 0.032" | 0.4 | 1.3 | 00000000 | 0000 |
| 0.125" | 0.252" | 0.035" | 0.094" | __ | 0.187" | 0.032" | 0.8 | 2.5 | 00000000 | 0000 |
| 0.157" | 0.16" | 0.04" | 0.12" | __ | 0.18" | 0.04" | 0.6 | 1.4 | 00000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 1.5 | 3.5 | 00000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 3 | 7.5 | 00000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | __ | 0.25" | 0.04" | 1 | 2.5 | 00000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | __ | 0.25" | 0.04" | 2 | 5 | 00000000 | 0000 |
| 0.188" | 0.405" | 0.058" | 0.156" | __ | 0.25" | 0.035" | 4 | 10 | 00000000 | 0000 |
| 0.2" | 0.2" | 0.06" | 0.16" | __ | 0.22" | 0.04" | 0.7 | 1.5 | 00000000 | 0000 |
| 0.24" | 0.24" | 0.07" | 0.2" | __ | 0.26" | 0.04" | 1.2 | 2.6 | 00000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | __ | 0.312" | 0.045" | 1.5 | 3.5 | 00000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | __ | 0.312" | 0.045" | 3 | 7 | 00000000 | 0000 |
| 0.25" | 0.481" | 0.07" | 0.187" | __ | 0.312" | 0.044" | 6 | 13 | 00000000 | 0000 |
| 0.31" | 0.31" | 0.09" | 0.26" | __ | 0.33" | 0.04" | 1.6 | 2.8 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 2 | 5 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 4 | 10 | 00000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | __ | 0.375" | 0.045" | 8 | 16 | 00000000 | 0000 |
| 0.375" | 0.785" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 10 | 18 | 00000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 2.5 | 7 | 00000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | __ | 0.5" | 0.078" | 5 | 14 | 00000000 | 0000 |
| 0.394" | 0.45" | 0.13" | 0.33" | __ | 0.43" | 0.06" | 1.9 | 4.2 | 00000000 | 0000 |
| 0.472" | 0.54" | 0.16" | 0.39" | __ | 0.51" | 0.09" | 2.7 | 6 | 00000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | __ | 0.688" | 0.11" | 4 | 9 | 00000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | __ | 0.688" | 0.11" | 8 | 18 | 00000000 | 0000 |
| 0.5" | 1.13" | 0.161" | 0.437" | __ | 0.688" | 0.088" | 12 | 23 | 00000000 | 00000 |
Acetal Plastic Nose | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.093" | -30° to 190° | 0.187" | 0.032" | 2 | 5 | 0000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 0.8 | 2 | 0000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 1.5 | 3.5 | 000000 | 0000 |
| 0.157" | 0.33" | 0.046" | 1/8" | __ | 0.215" | 0.035" | 3 | 7.5 | 0000000 | 0000 |
| 0.188" | 0.405" | 0.058" | 0.156" | -30° to 190° | 0.25" | 0.035" | 4 | 10 | 0000000 | 0000 |
| 0.25" | 0.481" | 0.07" | 0.187" | -30° to 190° | 0.312" | 0.044" | 6 | 13 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | -30° to 190° | 0.375" | 0.045" | 8 | 16 | 0000000 | 0000 |
| 0.375" | 0.785" | 0.11" | 0.312" | -30° to 190° | 0.5" | 0.078" | 10 | 18 | 0000000 | 0000 |
| 0.5" | 1.13" | 0.161" | 0.437" | -30° to 190° | 0.688" | 0.088" | 12 | 23 | 0000000 | 0000 |
Nylon Plastic Nose | ||||||||||
| 0.125" | 0.252" | 0.035" | 0.094" | -20° to 180° | 0.187" | 0.032" | 0.4 | 1.3 | 0000000 | 0000 |
| 0.125" | 0.252" | 0.035" | 0.094" | -20° to 180° | 0.187" | 0.032" | 0.8 | 2.5 | 0000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | -20° to 180° | 0.25" | 0.04" | 1 | 2.5 | 0000000 | 0000 |
| 0.188" | 0.394" | 0.058" | 0.156" | -20° to 180° | 0.25" | 0.04" | 2 | 5 | 0000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | -20° to 180° | 0.312" | 0.045" | 1.5 | 3.5 | 0000000 | 0000 |
| 0.25" | 0.471" | 0.07" | 0.187" | -20° to 180° | 0.312" | 0.045" | 3 | 7 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | -20° to 180° | 0.375" | 0.045" | 2 | 5 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.09" | 1/4" | -20° to 180° | 0.375" | 0.045" | 4 | 10 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | -20° to 180° | 0.5" | 0.078" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.11" | 0.312" | -20° to 180° | 0.5" | 0.078" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | -20° to 180° | 0.688" | 0.11" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.161" | 0.437" | -20° to 180° | 0.688" | 0.11" | 8 | 18 | 0000000 | 0000 |
Body | Nose | Flange | Nose Force, lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia., mm | Lg., mm | Extended Lg., mm | Dia., mm | Temp. Range Min. | Temp. Range Max., °F | Dia., mm | Thick., mm | Extended | Compressed | Each | |
Acetal Plastic Body | |||||||||||
400 Series Stainless Steel Nose | |||||||||||
| 3 | 3.4 | 0.55 | 2 | Not Rated | 480° | 3.6 | 0.6 | 0.4 | 0.8 | 0000000 | 00000 |
| 4 | 4 | 0.8 | 3 | Not Rated | 480° | 4.6 | 1 | 0.7 | 1.3 | 0000000 | 0000 |
| 5 | 5 | 1 | 4 | Not Rated | 480° | 5.6 | 1 | 1.3 | 2.1 | 0000000 | 0000 |
| 6 | 6 | 1.6 | 5 | Not Rated | 480° | 6.5 | 1 | 1.4 | 2.8 | 0000000 | 0000 |
| 8 | 8 | 1.9 | 6.5 | Not Rated | 480° | 8.5 | 1 | 2.2 | 4.6 | 0000000 | 0000 |
| 10 | 12 | 2.4 | 8 | Not Rated | 480° | 11 | 1.5 | 2.7 | 5 | 0000000 | 0000 |
| 12 | 14.5 | 3.3 | 10 | Not Rated | 480° | 13 | 1.5 | 3.1 | 5.6 | 0000000 | 0000 |
Acetal Plastic Nose | |||||||||||
| 4 | 4 | 0.8 | 3 | Not Rated | 120° | 4.6 | 1 | 0.7 | 1.5 | 0000000 | 0000 |
| 5 | 5 | 1 | 4 | Not Rated | 120° | 5.6 | 1 | 1.3 | 2.1 | 0000000 | 0000 |
| 6 | 6 | 1.6 | 5 | Not Rated | 120° | 6.5 | 1 | 1.4 | 2.8 | 0000000 | 0000 |
| 8 | 8 | 1.9 | 6.5 | Not Rated | 120° | 8.5 | 1 | 2.2 | 4.6 | 0000000 | 0000 |
| 10 | 12 | 2.4 | 8 | Not Rated | 120° | 11 | 1.5 | 2.7 | 5 | 0000000 | 0000 |
| 12 | 14.5 | 3.3 | 10 | Not Rated | 120° | 13 | 1.5 | 3.1 | 5.6 | 0000000 | 0000 |
Brass Body | |||||||||||
400 Series Stainless Steel Nose | |||||||||||
| 3 | 3.4 | 0.6 | 2.4 | Not Rated | 480° | 3.6 | 0.6 | 0.4 | 0.8 | 0000000 | 0000 |
| 4 | 4 | 0.8 | 3 | Not Rated | 480° | 4.5 | 1 | 0.7 | 1.3 | 0000000 | 0000 |
| 5 | 5 | 1 | 4 | Not Rated | 480° | 5.5 | 1 | 0.9 | 1.5 | 0000000 | 0000 |
| 6 | 6 | 1.6 | 5 | Not Rated | 480° | 6.5 | 1 | 1.3 | 2.6 | 0000000 | 0000 |
| 8 | 8 | 1.9 | 6.5 | Not Rated | 480° | 8.5 | 1 | 1.8 | 2.8 | 0000000 | 0000 |
300 Series Stainless Steel Body | |||||||||||
400 Series Stainless Steel Nose | |||||||||||
| 3 | 3.4 | 0.7 | 2.4 | Not Rated | 480° | 3.5 | 0.6 | 0.4 | 0.8 | 0000000 | 0000 |
| 4 | 4.1 | 1 | 3 | Not Rated | 480° | 4.6 | 0.9 | 0.1 | 0.2 | 0000000 | 0000 |
| 4 | 4.1 | 1 | 3 | Not Rated | 480° | 4.6 | 0.9 | 0.6 | 1.3 | 0000000 | 0000 |
| 4 | 4.1 | 1 | 3 | Not Rated | 480° | 4.6 | 0.9 | 1.1 | 2.3 | 0000000 | 0000 |
| 4 | 9.8 | 0.9 | 3 | Not Rated | 480° | 4.6 | 0.9 | 2.9 | 4.3 | 0000000 | 0000 |
| 5 | 5.1 | 1.4 | 4 | Not Rated | 480° | 5.6 | 0.9 | 0.1 | 1.1 | 0000000 | 0000 |
| 5 | 5.1 | 1.4 | 4 | Not Rated | 480° | 5.6 | 0.9 | 0.7 | 1.5 | 0000000 | 0000 |
| 5 | 5.1 | 1.4 | 4 | Not Rated | 480° | 5.6 | 0.9 | 1.1 | 2.7 | 0000000 | 0000 |
| 5 | 11.1 | 1.3 | 4 | Not Rated | 480° | 5.6 | 0.9 | 4.3 | 6.6 | 0000000 | 0000 |
| 6 | 6 | 1.8 | 5 | Not Rated | 480° | 6.5 | 1 | 0.5 | 1.5 | 0000000 | 0000 |
| 6 | 6 | 1.8 | 5 | Not Rated | 480° | 6.5 | 1 | 1.2 | 2.6 | 0000000 | 0000 |
| 6 | 6 | 1.8 | 5 | Not Rated | 480° | 6.5 | 1 | 1.6 | 4.3 | 0000000 | 0000 |
| 6 | 14 | 1.7 | 5 | Not Rated | 480° | 6.5 | 1 | 6.3 | 10.7 | 0000000 | 0000 |
| 8 | 7.9 | 2.4 | 6.5 | Not Rated | 480° | 8.5 | 1.1 | 0.9 | 2 | 0000000 | 0000 |
| 8 | 7.9 | 2.4 | 6.5 | Not Rated | 480° | 8.5 | 1.1 | 1.6 | 2.8 | 0000000 | 0000 |
| 8 | 7.9 | 2.4 | 6.5 | Not Rated | 480° | 8.5 | 1.1 | 2.5 | 5.6 | 0000000 | 0000 |
| 8 | 16.9 | 2.3 | 6.5 | Not Rated | 480° | 8.5 | 1.1 | 9 | 15.1 | 0000000 | 0000 |
| 10 | 11.5 | 3.3 | 8.5 | Not Rated | 480° | 11 | 1.5 | 0.9 | 2.2 | 0000000 | 0000 |
| 10 | 11.5 | 3.3 | 8.5 | Not Rated | 480° | 11 | 1.5 | 1.9 | 4.2 | 0000000 | 0000 |
| 10 | 11.5 | 3.3 | 8.5 | Not Rated | 480° | 11 | 1.5 | 3.8 | 8.3 | 0000000 | 0000 |
| 10 | 24.5 | 3.1 | 8.5 | Not Rated | 480° | 11 | 1.5 | 14.8 | 23.6 | 0000000 | 0000 |
| 12 | 13.7 | 4 | 10 | Not Rated | 480° | 13 | 2.3 | 1.4 | 3.3 | 0000000 | 0000 |
| 12 | 13.7 | 4 | 10 | Not Rated | 480° | 13 | 2.3 | 2.7 | 6 | 0000000 | 0000 |
| 12 | 13.7 | 4 | 10 | Not Rated | 480° | 13 | 2.3 | 6.7 | 12.1 | 0000000 | 0000 |
Flush-Mount Press-Fit Ball-Nose Spring Plungers
The flangeless design allows these spring plungers to mount flush with a surface. Press them into unthreaded holes in soft material such as wood, plastic, and aluminum. Drill a slightly smaller hole for a snug fit.
Steel is strong and wear resistant.
Stainless steel is chemical resistant and may be mildly magnetic. 420 and 440C noses are hard and wear resistant.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Body | Nose | Nose Force, lbs. | Steel Body | 18-8 Stainless Steel Body | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Texture | Extended Lg. | Dia. | Extended | Compressed | Each | Each | ||
440C Stainless Steel Nose | ||||||||||
| 0.148" | 0.29" | Knurled | 0.035" | 0.094" | 0.4 | 1.3 | 0000000 | 00000 | 0000000 | 00000 |
| 0.21" | 0.435" | Knurled | 0.058" | 0.156" | 1 | 2.5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.254" | 0.52" | Knurled | 0.07" | 0.188" | 1.5 | 3.5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.254" | 0.52" | Knurled | 0.07" | 0.188" | 3 | 7 | 0000000 | 0000 | 0000000 | 0000 |
| 0.316" | 0.7" | Knurled | 0.09" | 1/4" | 2 | 5 | 0000000 | 0000 | 0000000 | 0000 |
| 0.316" | 0.7" | Knurled | 0.09" | 1/4" | 4 | 10 | 0000000 | 0000 | 0000000 | 0000 |
| 0.379" | 0.865" | Knurled | 0.11" | 0.312" | 5 | 14 | 0000000 | 0000 | 0000000 | 0000 |
| 0.379" | 0.865" | Knurled | 0.11" | 0.313" | 2.5 | 7 | 0000000 | 0000 | 0000000 | 0000 |
| 0.504" | 1.21" | Knurled | 0.161" | 0.437" | 8 | 18 | 0000000 | 0000 | 000000 | 00 |
| 0.504" | 1.21" | Knurled | 0.161" | 0.438" | 4 | 9 | 0000000 | 0000 | 0000000 | 0000 |
Sealing Press-Fit Ball-Nose Spring Plungers
An O-ring in the flange creates a tight seal. Press these spring plungers into unthreaded holes in soft material such as wood, plastic, and aluminum. With a nose and body made from 18-8 stainless steel, they're chemical resistant and may be mildly magnetic. Drill a slightly smaller hole for a snug fit.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Body | Nose | Flange | Nose Force, lbs. | O-Ring | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Extended Lg. | Dia. | Thick. | Dia. | Extended | Compressed | Temp. Range, °F | Material | Each | |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | |||||||||||
| 0.158" | 0.106" | 0.032" | 0.118" | 0.09" | 0.195" | 0.7 | 1.6 | -20° to 210° | Buna-N Rubber | 0000000 | 00000 |
| 0.197" | 0.146" | 0.039" | 0.158" | 0.09" | 0.234" | 0.9 | 1.6 | -20° to 210° | Buna-N Rubber | 0000000 | 0000 |
| 0.236" | 0.13" | 0.059" | 0.197" | 0.15" | 0.313" | 1.3 | 2.7 | -20° to 210° | Buna-N Rubber | 0000000 | 0000 |
| 0.315" | 0.189" | 0.071" | 0.256" | 0.17" | 0.392" | 1.3 | 2.7 | -20° to 210° | Buna-N Rubber | 0000000 | 0000 |
| 0.394" | 0.323" | 0.106" | 0.315" | 0.21" | 0.471" | 2.2 | 4.5 | -20° to 210° | Buna-N Rubber | 0000000 | 0000 |
| 0.473" | 0.413" | 0.138" | 0.394" | 0.22" | 0.549" | 3.4 | 5.6 | -20° to 210° | Buna-N Rubber | 0000000 | 00000 |
Press-Fit Long-Nose Spring Plungers
Press these spring plungers into unthreaded holes in soft material such as wood, plastic, and aluminum. They have a nose that is longer than ball-nose spring plungers to provide a large bearing surface and handle side loads. A flange keeps the plunger from being pushed through a hole when the ball is depressed. Drill a slightly smaller hole for a snug fit.
Steel is strong and wear resistant. Black-oxide steel bodies resist corrosion in dry environments.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Plastic is chemical resistant and lightweight; acetal noses are extra soft to minimize marring soft surfaces such as aluminum.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Body | Nose | Flange | Nose Force, lbs. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Extended Lg. | Dia. | Temp. Range, °F | Thick. | Dia. | Extended | Compressed | Each | |
Black-Oxide Steel Body | ||||||||||
Steel Nose | ||||||||||
| 0.125" | 0.252" | 0.062" | 0.07" | __ | 0.03" | 0.187" | 1 | 2 | 0000000 | 00000 |
| 0.188" | 0.441" | 0.094" | 0.121" | __ | 0.04" | 0.25" | 0.8 | 2 | 0000000 | 0000 |
| 0.188" | 0.441" | 0.094" | 0.121" | __ | 0.04" | 0.25" | 1.5 | 4.5 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | __ | 0.06" | 0.312" | 1.3 | 3 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | __ | 0.06" | 0.312" | 2.5 | 6 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.151" | 0.186" | __ | 0.05" | 0.375" | 4 | 10 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | __ | 0.1" | 0.5" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | __ | 0.1" | 0.5" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | __ | 0.13" | 0.688" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | __ | 0.13" | 0.688" | 8 | 18 | 0000000 | 0000 |
Acetal Plastic Nose | ||||||||||
| 0.188" | 0.441" | 0.094" | 0.121" | -40° to 190° | 0.04" | 0.25" | 0.8 | 2 | 0000000 | 0000 |
| 0.188" | 0.441" | 0.094" | 0.121" | -40° to 190° | 0.04" | 0.25" | 1.5 | 4.5 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | -40° to 190° | 0.06" | 0.312" | 1.3 | 3 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | -40° to 190° | 0.06" | 0.312" | 2.5 | 6 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | -40° to 190° | 0.1" | 0.5" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | -40° to 190° | 0.1" | 0.5" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | -40° to 190° | 0.13" | 0.688" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | -40° to 190° | 0.13" | 0.688" | 8 | 18 | 0000000 | 0000 |
18-8 Stainless Steel Body | ||||||||||
18-8 Stainless Steel Nose | ||||||||||
| 0.125" | 0.252" | 0.062" | 0.07" | __ | 0.03" | 0.187" | 1 | 2 | 0000000 | 0000 |
| 0.188" | 0.441" | 0.094" | 0.121" | __ | 0.04" | 0.25" | 0.8 | 2 | 0000000 | 0000 |
| 0.188" | 0.441" | 0.094" | 0.121" | __ | 0.04" | 0.25" | 1.5 | 4.5 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | __ | 0.06" | 0.312" | 1.3 | 3 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | __ | 0.06" | 0.312" | 2.5 | 6 | 0000000 | 0000 |
| 0.312" | 0.643" | 0.151" | 0.186" | __ | 0.05" | 0.375" | 4 | 10 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | __ | 0.1" | 0.5" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | __ | 0.1" | 0.5" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | __ | 0.13" | 0.688" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | __ | 0.13" | 0.688" | 8 | 18 | 0000000 | 0000 |
Acetal Plastic Nose | ||||||||||
| 0.188" | 0.441" | 0.094" | 0.121" | -40° to 190° | 0.04" | 0.25" | 0.8 | 2 | 0000000 | 0000 |
| 0.188" | 0.441" | 0.094" | 0.121" | -40° to 190° | 0.04" | 0.25" | 1.5 | 4.5 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | -40° to 190° | 0.06" | 0.312" | 1.3 | 3 | 0000000 | 0000 |
| 0.25" | 0.521" | 0.125" | 0.168" | -40° to 190° | 0.06" | 0.312" | 2.5 | 6 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | -40° to 190° | 0.1" | 0.5" | 2.5 | 7 | 0000000 | 0000 |
| 0.375" | 0.786" | 0.187" | 0.234" | -40° to 190° | 0.1" | 0.5" | 5 | 14 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | -40° to 190° | 0.13" | 0.688" | 4 | 9 | 0000000 | 0000 |
| 0.5" | 1.1" | 0.25" | 0.332" | -40° to 190° | 0.13" | 0.688" | 8 | 18 | 0000000 | 0000 |
Press-Fit Extra-Long-Nose Spring Plungers
Noses are up to four times longer than standard long-nose press-fit spring plungers. Press these spring plungers into unthreaded holes in soft material such as wood, plastic, and aluminum. Drill a slightly smaller hole for a snug fit. The nose is made from wear-resistant steel. The body is aluminum and corrosion resistant in wet environments.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Body | Nose | Nose Force, lbs. | |||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Extended Lg. | Dia. | Extended | Compressed | Each | |
2011 Aluminum Body and Steel Nose | |||||||
| 0.25" | 0.625" | 0.25" | 1/8" | 0.5 | 0.9 | 0000000 | 00000 |
| 0.25" | 0.75" | 0.5" | 1/8" | 0.3 | 1 | 0000000 | 0000 |
| 0.25" | 0.75" | 0.5" | 1/8" | 0.3 | 1.1 | 0000000 | 0000 |
| 0.25" | 1" | 0.563" | 0.094" | 0.3 | 1.1 | 0000000 | 0000 |
| 0.25" | 1" | 0.563" | 1/8" | 0.3 | 0.8 | 0000000 | 0000 |
| 0.25" | 1" | 0.563" | 1/8" | 0.3 | 0.9 | 0000000 | 0000 |
| 0.25" | 1" | 0.563" | 0.156" | 0.2 | 0.7 | 0000000 | 0000 |
| 0.25" | 1.25" | 0.813" | 1/8" | 0.3 | 1.1 | 0000000 | 00000 |
| 0.313" | 0.75" | 0.5" | 0.188" | 0.3 | 1.5 | 0000000 | 0000 |
| 0.344" | 0.813" | 0.438" | 1/4" | 0.3 | 1.1 | 0000000 | 00000 |