We will reply to your message within an hour.
The contact point is located on the back of this indicator, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements.
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
Sets include a contact point adapter, swivel clamp, hole attachment, and mounting accessories.
Use these indicators near magnetic chucks and other equipment with a magnetic field. Sets include a contact point adapter, swivel clamp, hole attachment, and mounting accessories.
For direct measurements, these Starrett indicators have a continuous dial numbered clockwise around the face.
For comparative measurements of a part's tolerance against a reference measurement, these Starrett indicators have a balanced dial with positive values on one side and negative values on the other side.
For direct measurements, these Mitutoyo indicators have a continuous dial numbered clockwise around the face.
For comparative measurements of a part's tolerance against a reference measurement, these Mitutoyo indicators have a balanced dial with positive values on one side and negative values on the other side.
For direct measurements, these indicators have a continuous dial numbered clockwise around the face.
Read the dial face from above—a spring-loaded plunger on the back of these indicators retracts and extends to measure objects. These indicators have a continuous dial numbered clockwise around the face, so it’s easy to see how much a dimension increases.
Often used in machine shops, these indicators are rated IP65 for protection from dust, spraying water, and coolant.
Take direct and comparative measurements with the same indicator. The combination dial has both a continuous scale numbered clockwise around the face and a balanced scale with positive values on one side of the zero and negative values on the other side.
For comparative measurements of a part's tolerance against a reference measurement, these indicators have a balanced dial with positive values on one side and negative values on the other side.
Place the magnetic base on metal surfaces for a solid mount. The base has a V-grooved bottom for mounting on flat and curved surfaces and magnetic release switch for easy setups.
Jointed at the top, middle, and bottom, the arm holding these variance indicators adjusts to various angles.
With adjustable magnetic pins that conform to any shape, the base on these variance indicators mounts securely to uneven surfaces.
Measure in almost any position—these variance indicators have an adjustable ball-and-socket arm that locks in place with a lever.
These Mitutoyo indicators have a magnetic base with V-grooved bottom to provide a solid mount on flat and curved metal surfaces. They also have a magnetic release switch for easy setups.
For a solid mount on metal surfaces, these indicators come with a magnetic base. They have a continuous dial numbered clockwise around the face for direct measurements. A spring-loaded plunger retracts and extends to measure objects.
A granite base stabilizes these indicators. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.
Clamp these indicators onto your machine or other surface—they take up less space on your surface than indicators with a magnetic or weighted base. The plunger is on the back of the dial, so you can read the dial face from above.
Often used where space is tight or there’s not much of a surface for mounting, the clamp on these indicators fits where a weighted or magnetic base can’t.
Read measurements on an LCD. These Mitutoyo indicators have a spring-loaded plunger that retracts and extends to measure objects.
These indicators have a larger display than other Mitutoyo electronic indicators for easier reading.
A slim design fits in tight spots. These indicators have a spring-loaded plunger that retracts and extends to measure objects.
Check whether measurements are in tolerance at a glance. LCD backlighting changes from green to red to indicate when measurements fall outside your set tolerance.
For use in wet environments, these indicators are IP53 rated for limited protection from dust and spraying water. A spring-loaded plunger retracts and extends to measure objects.
These indicators can display readings in fractional increments in addition to decimal increments.
Bend and flex the arm of the base to position your indicator—these holders have ball-and-socket segments that lock in place with a lever. The base is magnetic and mounts to flat and curved metal surfaces.
Stick the magnetic base onto metal surfaces for a secure hold while measuring.
Adjust joints at the top, middle, and bottom of the base to position the indicator in place. The base is magnetic for a solid mount on metal surfaces.
Protected from dirty machining environments, these indicators are IP67 rated to seal out dust, coolant, and water from temporary submersion.
Read measurements from up to 4 ft. away.
A contact point on the back makes it easy to read measurements on the LCD from above.
Read measurements on an LCD. These Starrett indicators have a spring-loaded plunger that retracts and extends to measure objects.
Adapt metric dial indicators for use with standard inch-size contact points.
Use these rods to extend the reach of your indicator.
Mount one of these rods between the plunger and contact point to extend the reach of your indicator.
Lift the spindle on an electronic indicator without having to touch the indicator itself.
Operated with a quick press, these levers are a simpler alternative to pinching and manually lifting the plunger on your variance indicator.
Firmly hold the stem of a plunger-style indicator in a base.
Use different colored caps to code indicators by calibration date, precision, or other specifications.
Cut one of these stickers to show your desired tolerance limits, and affix it to the face of an indicator to quickly see if a part is in or out of tolerance.
Use with swivel clamps to position indicators.