Filter by
Cut Type
Cutting Direction
Insert Thickness
Shank Type
Insert Code
Insert Holder Code
Maximum Depth of Cut
Export Control Classification Number (ECCN)
DFARS Specialty Metals
RoHS
Insert Holding Method
Blade-Style Cutoff and Grooving Carbide Insert Holders
Shown with Blade-Style Holder and Carbide Insert
Install one of these holders into a tool block for right- and left-hand mounting in a lathe. Pair with a carbide insert (sold separately) to make the exact cutoff and grooving tool you need. These holders have a tapered opening at each end.
For technical drawings and 3-D models, click on a part number.
Holders
Holder
Overall | Holders | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. Dp. of Cut | Lg. | Wd. | Ht. | For Insert Thick. | Material | Insert Extractor Included | Each | |
| 1.5" | 3 3/8" | 0.063" | 3/4" | 0.087", 0.094" | Steel | Yes | 00000000 | 000000 |
| 2" | 4 5/16" | 0.063" | 1 1/32" | 0.087", 0.094" | Steel | Yes | 00000000 | 00000 |
| 3" | 4 5/16" | 0.094" | 1 1/32" | 0.122" | Steel | Yes | 00000000 | 00000 |
| 3" | 4 5/16" | 1/8" | 1 1/32" | 0.161" | Steel | Yes | 00000000 | 00000 |
| 4" | 5 7/8" | 0.094" | 1 1/4" | 0.122" | Steel | Yes | 00000000 | 000000 |
| 4" | 5 7/8" | 1/8" | 1 1/4" | 0.161", 0.187" | Steel | Yes | 00000000 | 000000 |
| 5" | 5 7/8" | 0.156" | 1 1/4" | 0.201" | Steel | Yes | 00000000 | 000000 |
| 5" | 5 7/8" | 0.203" | 1 1/4" | 0.252" | Steel | Yes | 00000000 | 000000 |
Inserts
Shown with Blade-Style Holder and Carbide Insert
Neutral
Right Hand
Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.
Neutral inserts have a 0° lead angle for cutting solid workpieces.
Right-hand inserts have an 8° lead angle for cutting hollow workpieces such as pipe and tubing.
C2 carbide is abrasion resistant and less likely to chip or crack than C5 carbide when cutting aluminum, brass, and bronze.
C5 carbide holds up better than C2 carbide when making cuts in steel, stainless steel, and cast iron.
Coated inserts last longer and can be run at faster speeds than uncoated inserts.
| Thick. | Groove Wd. | Lg. | Radius | For Use On | Each | |
Uncoated C2 Carbide | ||||||
|---|---|---|---|---|---|---|
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 000000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.252" | 0.252" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
Uncoated C5 Carbide | ||||||
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.252" | 0.252" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
Titanium Nitride (TiN)-Coated C5 Carbide | ||||||
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.252" | 0.252" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Tool Blocks
Shown with Blade-Style Holder and Carbide Insert
Mount blade-style holders to a lathe tool post or turret.
Shank | Overall | |||||||
|---|---|---|---|---|---|---|---|---|
| For Holder Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Material | Each | |
| 3 3/8" | 5/8" | 1/2" | 3" | 1" | 1 3/8" | Steel | 00000000 | 0000000 |
| 4 5/16", 4 7/16" | 3/4" | 3/4" | 3 1/2" | 1 1/2" | 2" | Steel | 00000000 | 000000 |
| 5 7/8" | 3/4" | 3/4" | 4 1/2" | 1 3/4" | 2" | Steel | 00000000 | 000000 |
| 5 7/8" | 7/8" | 1" | 4 1/2" | 2" | 2 1/8" | Steel | 00000000 | 000000 |
| 5 7/8" | 1 1/8" | 1 1/4" | 4 1/2" | 2 1/4" | 2 3/8" | Steel | 00000000 | 000000 |
Tool Blocks for Blade-Style Cutoff and Grooving Carbide Insert Holders
Shown with Blade-Style Holder and Carbide Insert
Mount blade-style holders to a lathe tool post or turret.
For technical drawings and 3-D models, click on a part number.
Shank | Overall | |||||||
|---|---|---|---|---|---|---|---|---|
| For Holder Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Material | Each | |
| 3 3/8" | 5/8" | 1/2" | 3" | 1" | 1 3/8" | Steel | 00000000 | 0000000 |
| 4 5/16", 4 7/16" | 3/4" | 3/4" | 3 1/2" | 1 1/2" | 2" | Steel | 00000000 | 000000 |
| 5 7/8" | 3/4" | 3/4" | 4 1/2" | 1 3/4" | 2" | Steel | 00000000 | 000000 |
| 5 7/8" | 7/8" | 1" | 4 1/2" | 2" | 2 1/8" | Steel | 00000000 | 000000 |
| 5 7/8" | 1 1/8" | 1 1/4" | 4 1/2" | 2 1/4" | 2 3/8" | Steel | 00000000 | 000000 |
Shank-Style Cutoff and Grooving Carbide Insert Holders
Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block. Pair with a carbide insert (sold separately) to make the exact cutoff and grooving tool you need. These holders have a tapered opening at one end.
For technical drawings and 3-D models, click on a part number.
Holders
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Dp. of Cut | Wd. | Ht. | O'all Lg. | For Insert Thick. | Material | Insert Extractor Included | Each | |
| 0.55" | 3/8" | 3/8" | 3 3/8" | 0.087", 0.094" | Steel | Yes | 0000000 | 000000 |
| 0.58" | 3/8" | 1/2" | 4 21/64" | 0.087", 0.094" | Steel | Yes | 0000000 | 00000 |
| 0.63" | 3/8" | 1/2" | 4 21/64" | 0.122" | Steel | Yes | 0000000 | 00000 |
| 0.63" | 1/2" | 5/8" | 4 21/64" | 0.122" | Steel | Yes | 0000000 | 00000 |
| 0.63" | 1/2" | 3/4" | 4 21/64" | 0.087", 0.094" | Steel | Yes | 0000000 | 000000 |
| 0.7" | 1/2" | 3/4" | 4 21/64" | 0.122" | Steel | Yes | 0000000 | 000000 |
| 1.03" | 1" | 1" | 5 7/8" | 0.122" | Steel | Yes | 0000000 | 000000 |
| 1.25" | 1" | 1" | 5 7/8" | 0.161" | Steel | Yes | 0000000 | 000000 |
| 1.5" | 1" | 1" | 5 7/8" | 0.187", 0.201" | Steel | Yes | 0000000 | 000000 |
Inserts
Neutral
Right Hand
Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.
Neutral inserts have a 0° lead angle for cutting solid workpieces.
Right-hand inserts have an 8° lead angle for cutting hollow workpieces such as pipe and tubing.
C2 carbide is abrasion resistant and less likely to chip or crack than C5 carbide when cutting aluminum, brass, and bronze.
C5 carbide holds up better than C2 carbide when making cuts in steel, stainless steel, and cast iron.
Coated inserts last longer and can be run at faster speeds than uncoated inserts.
| Thick. | Groove Wd. | Lg. | Radius | For Use On | Each | |
Uncoated C2 Carbide | ||||||
|---|---|---|---|---|---|---|
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 000000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Aluminum, Brass, Bronze | 0000000 | 00000 |
Uncoated C5 Carbide | ||||||
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Steel | 0000000 | 00000 |
Titanium Nitride (TiN)-Coated C5 Carbide | ||||||
Neutral | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.201" | 0.201" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Right Hand | ||||||
| 0.087" | 0.087" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.094" | 0.094" | 0.385" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.122" | 0.122" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.161" | 0.161" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.187" | 0.187" | 0.525" | 0.008" | Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Shank-Style Holders for Indexable Cutoff and Grooving Carbide Inserts
Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block. Pair with a square-nose carbide insert (sold separately) to make a cutoff and grooving tool or a round-nose insert to make a grooving and profiling tool. These holders have an opening at one end.
For technical drawings and 3-D models, click on a part number.
Holders
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Dp. of Cut | Wd. | Ht. | O'all Lg. | For Insert Thick. | Material | Hex Key Size | Each | |
| 0.35" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 0000000 |
| 0.35" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.47" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.47" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.55" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.55" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.71" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.71" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.79" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.79" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.95" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.95" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
Grooving and Profiling Inserts
External Grooving
External Profiling
The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges. Pair an insert with a compatible shank-style holder. When the first cutting edge dulls, flip the insert to use the other edge, giving it twice the life of a standard grooving insert.
| Thick. | Max. Dp. of Cut | Lg. | Lead Angle | Radius | Material | Material Grade | Finish | For Use On | Each | |
For Use On Aluminum, Cast Iron, Stainless Steel, and Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0.118" | 0.06" | 0.866" | 0° | 0.059" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 000000 |
| 0.157" | 0.08" | 0.984" | 0° | 0.079" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Blade-Style Holders for Indexable Cutoff and Grooving Carbide Inserts
Shown with Blade-Style Holder and Carbide Insert
Install one of these holders into a tool block for right- and left-hand mounting in a lathe. Pair with a carbide insert (sold separately) to make the exact cutoff and grooving tool you need. These holders have an opening at each end.
Use an insert extractor (sold separately) to change out inserts in the holder.
For technical drawings and 3-D models, click on a part number.
Holders
Overall | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Dp. of Cut | Lg. | Wd. | Ht. | For Insert Thick. | Material | Insert Extractor Included | Each | |
| 1" | 4 7/16" | 0.063" | 1 1/32" | 0.079" | Steel | No | 0000000 | 0000000 |
| 1.15" | 5 7/8" | 0.063" | 1 1/4" | 0.079" | Steel | No | 0000000 | 000000 |
| 1.55" | 4 7/16" | 0.094" | 1 1/32" | 0.118" | Steel | No | 0000000 | 000000 |
| 1.65" | 4 7/16" | 1/8" | 1 1/32" | 0.157" | Steel | No | 0000000 | 000000 |
| 1.75" | 5 7/8" | 0.094" | 1 1/4" | 0.118" | Steel | No | 0000000 | 000000 |
| 1.95" | 5 7/8" | 1/8" | 1 1/4" | 0.157" | Steel | No | 0000000 | 000000 |
| 2.35" | 5 7/8" | 0.156" | 1 1/4" | 0.197" | Steel | No | 0000000 | 000000 |
| 2.75" | 5 7/8" | 0.203" | 1 1/4" | 0.236" | Steel | No | 0000000 | 000000 |
| Insert Extractor | 0000000 | Each | 000000 |
Cutoff and Grooving Inserts
Shown with Blade-Style Holder and Carbide Insert
Cutoff
External Grooving
Cut square corner grooves in a workpiece or cut completely through a part. Pair an insert with a compatible holder. When the first cutting edge dulls, flip the insert to use the other edge, giving it twice the life of a standard cutoff and grooving insert.
| Thick. | Max. Dp. of Cut | Lg. | Lead Angle | Radius | Material | Material Grade | Finish | For Use On | Each | |
Neutral | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0.079" | 0.04" | 0.866" | 0° | 0.079" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 000000 |
| 0.118" | 0.06" | 0.866" | 0° | 0.118" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.157" | 0.08" | 0.984" | 0° | 0.157" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.197" | 0.1" | 0.984" | 0° | 0.157" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
| 0.236" | 0.12" | 0.984" | 0° | 0.157" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |
Tool Blocks
Shown with Blade-Style Holder and Carbide Insert
Mount blade-style holders to a lathe tool post or turret.
High-Performance Carbide Insert Holders for External Threading and Grooving
Pair these holders with a threading insert or a grooving insert to make cuts on the outside of a workpiece. A highly-rigid clamping design results in a smoother finish and superior tool life. They are compatible with top-notch style threading and grooving systems.
Use a right-hand external holder with a right-hand insert when the workpiece is rotating counterclockwise (toward the lathe operator).
Use a left-hand external holder with a left-hand insert when the workpiece is rotating clockwise (away from the lathe operator).
For technical drawings and 3-D models, click on a part number.
Holders
Right Hand
Left Hand
Holders | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | ||||||||||
| Holder Code | Wd. | Ht. | O'all Lg. | Material | Code | Thick. | Clamp Screw Hex Key Size | Each | Each | Each | |||
Right Hand | |||||||||||||
| ASR-082B | 1/2" | 1/2" | 6" | Steel | G-2031R, G-2062R, G-2094R, G-2125R, T-2R | 0.15" | 7/64" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| ASR-103B | 5/8" | 5/8" | 4 1/2" | Steel | G-3031R, G-3062R, G-3094R, G-3125R, T-3R | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| SR-122B | 3/4" | 3/4" | 4 1/2" | Steel | G-2031R, G-2062R, G-2094R, G-2125R, T-2R | 0.15" | 7/64" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| SR-123B | 3/4" | 3/4" | 4 1/2" | Steel | G-3031R, G-3062R, G-3094R, G-3125R, T-3R | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| SR-163D | 1" | 1" | 6" | Steel | G-3031R, G-3062R, G-3094R, G-3125R, T-3R | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| SR-62 | 3/8" | 3/8" | 2 1/2" | Steel | G-2031R, G-2062R, G-2094R, G-2125R, T-2R | 0.15" | 7/64" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Left Hand | |||||||||||||
| ASL-082B | 1/2" | 1/2" | 6" | Steel | G-2031L, G-2062L, G-2094L, G-2125L, T-2L | 0.15" | 7/64" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| ASL-103B | 5/8" | 5/8" | 4 1/2" | Steel | G-3031L, G-3062L, G-3094L, G-3125L, T-3L | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| SL-122B | 3/4" | 3/4" | 4 1/2" | Steel | G-2031L, G-2062L, G-2094L, G-2125L, T-2L | 0.15" | 7/64" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
| SL-123B | 3/4" | 3/4" | 4 1/2" | Steel | G-3031L, G-3062L, G-3094L, G-3125L, T-3L | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| SL-163D | 1" | 1" | 6" | Steel | G-3031L, G-3062L, G-3094L, G-3125L, T-3L | 0.195" | 5/32" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| SL-62 | 3/8" | 3/8" | 5" | Steel | G-2031L, G-2062L, G-2094L, G-2125L, T-2L | 0.15" | 7/64" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 0000 |
Threading Inserts
Right Hand
Left Hand
Right Hand, Top View (NPT)
Right Hand, Top View (UNC, UNF, UNS)
Left Hand, Top View (NPT)
Left Hand, Top View (UNC, UNF, UNS)
External Threading
| Insert Code | Thread Type | External Threads Per Inch | Thick. | Tip Radius | O'all Ht. | For Use On | Each | |
AC3 Carbide | ||||||||
|---|---|---|---|---|---|---|---|---|
Right Hand | ||||||||
| DC-3-115VR75 | NPT | 11 1/2 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 000000 |
| DC-3-14VR75 | NPT | 14 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-18VR75 | NPT | 18 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-27VR75 | NPT | 27 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-8VR75 | NPT | 8 | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-2R | UNC, UNS, UNF | 8 to 36 | 0.15" | 0.004" | 0.219" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-3R | UNC, UNS, UNF | 6 to 20 | 0.195" | 0.008" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
Left Hand | ||||||||
| DC-3-115VL75 | NPT | 11 1/2 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-14VL75 | NPT | 14 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-18VL75 | NPT | 18 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-27VL75 | NPT | 27 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-8VL75 | NPT | 8 | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-2L | UNC, UNS, UNF | 8 to 36 | 0.15" | 0.004" | 0.219" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-3L | UNC, UNS, UNF | 6 to 20 | 0.195" | 0.008" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
AC50 Carbide | ||||||||
Right Hand | ||||||||
| T-2R | UNC, UNS, UNF | 8 to 36 | 0.15" | 0.004" | 0.219" | Steel | 0000000 | 00000 |
| T-3R | UNC, UNS, UNF | 6 to 20 | 0.195" | 0.008" | 0.344" | Steel | 0000000 | 00000 |
Left Hand | ||||||||
| T-2L | UNC, UNS, UNF | 8 to 36 | 0.15" | 0.004" | 0.219" | Steel | 0000000 | 00000 |
| T-3L | UNC, UNS, UNF | 6 to 20 | 0.195" | 0.008" | 0.344" | Steel | 0000000 | 00000 |
Grooving Inserts
Right Hand
Left Hand
Right Hand, Top View
Left Hand, Top View
External Grooving
Groove | ||||||||
|---|---|---|---|---|---|---|---|---|
| Insert Code | Wd. | Dp. | Thick. | Tip Radius | O'all Ht. | For Use On | Each | |
AC3 Carbide | ||||||||
Right Hand | ||||||||
| G-3031R | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 000000 |
| G-3062R | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3094R | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| G-3125R | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
Left Hand | ||||||||
| G-3031L | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3062L | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3094L | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| G-3125L | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
AC50 Carbide | ||||||||
Right Hand | ||||||||
| G-3031R | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Steel | 000000 | 00000 |
| G-3062R | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3094R | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3125R | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
Left Hand | ||||||||
| G-3031L | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Steel | 000000 | 00000 |
| G-3062L | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3094L | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
| G-3125L | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
High-Performance Carbide Insert Holders for Internal Threading and Grooving
Pair these holders with a threading insert or a grooving insert to make cuts on the inside of a hollow workpiece. A highly-rigid clamping design results in a smoother finish and superior tool life. They are compatible with top-notch style threading and grooving systems.
Use a right-hand internal holder with a left-hand insert when the workpiece is rotating counterclockwise (toward the lathe operator).
Use a left-hand internal holder with a right-hand insert when the workpiece is rotating clockwise (away from the lathe operator).
For technical drawings and 3-D models, click on a part number.
Holders
Right Hand
Left Hand
Holders | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Replacement Clamps | Replacement Clamp Screws | ||||||||||||
| Holder Code | Shank Dia. | Min. Hole Dia. | Max. Hole Dp. | O'all Lg. | Material | Code | Thick. | Clamp Screw Hex Key Size | Each | Each | Each | |||
Right Hand | ||||||||||||||
| A08-ER2 | 1/2" | 3/4" | 4" | 8" | Steel | G-2031L, G-2062L, G-2094L, G-2125L, T-2L | 0.15" | 7/64" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 00000 |
| A12-ER2 | 3/4" | 1 1/8" | 6" | 10" | Steel | G-2031L, G-2062L, G-2094L, G-2125L, T-2L | 0.15" | 7/64" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| A16-ER3 | 1" | 1 3/8" | 4" | 12" | Steel | G-3031L, G-3062L, G-3094L, G-3125L, T-3L | 0.195" | 5/32" | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| A24-ER3 | 1 1/2" | 2" | 6" | 14" | Steel | G-3031L, G-3062L, G-3094L, G-3125L, T-3L | 0.195" | 5/32" | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | ||||||||||||||
| A08-EL2 | 1/2" | 3/4" | 4" | 8" | Steel | G-2031R, G-2062R, G-2094R, G-2125R, T-2R | 0.15" | 7/64" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| A12-EL2 | 3/4" | 1 1/8" | 6" | 10" | Steel | G-2031R, G-2062R, G-2094R, G-2125R, T-2R | 0.15" | 7/64" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 0000 |
| A16-EL3 | 1" | 1 3/8" | 4" | 12" | Steel | G-3031R, G-3062R, G-3094R, G-3125R, T-3R | 0.195" | 5/32" | 0000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Threading Inserts
Right Hand
Left Hand
Right Hand, Top View (NPT)
Right Hand, Top View (UNC, UNF, UNS)
Left Hand, Top View (NPT)
Left Hand, Top View (UNC, UNF, UNS)
Internal Threading
| Insert Code | Thread Type | Internal Threads Per Inch | Thick. | Tip Radius | O'all Ht. | For Use On | Each | |
AC3 Carbide | ||||||||
|---|---|---|---|---|---|---|---|---|
Right Hand | ||||||||
| DC-3-115VR75 | NPT | 11 1/2 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 000000 |
| DC-3-14VR75 | NPT | 14 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-18VR75 | NPT | 18 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-27VR75 | NPT | 27 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-8VR75 | NPT | 8 | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-2R | UNC, UNS, UNF | 7 to 20 | 0.15" | 0.004" | 0.219" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-3R | UNC, UNS, UNF | 5 to 12 | 0.195" | 0.008" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
Left Hand | ||||||||
| DC-3-115VL75 | NPT | 11 1/2 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-14VL75 | NPT | 14 | 0.195" | 0.004" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-18VL75 | NPT | 18 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-27VL75 | NPT | 27 | 0.195" | 0.002" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| DC-3-8VL75 | NPT | 8 | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-2L | UNC, UNS, UNF | 7 to 20 | 0.15" | 0.004" | 0.219" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| T-3L | UNC, UNS, UNF | 5 to 12 | 0.195" | 0.008" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
AC50 Carbide | ||||||||
Right Hand | ||||||||
| T-2R | UNC, UNS, UNF | 7 to 20 | 0.15" | 0.004" | 0.219" | Steel | 0000000 | 00000 |
| T-3R | UNC, UNS, UNF | 5 to 12 | 0.195" | 0.008" | 0.344" | Steel | 0000000 | 00000 |
Left Hand | ||||||||
| T-2L | UNC, UNS, UNF | 7 to 20 | 0.15" | 0.004" | 0.219" | Steel | 0000000 | 00000 |
| T-3L | UNC, UNS, UNF | 5 to 12 | 0.195" | 0.008" | 0.344" | Steel | 0000000 | 00000 |
Grooving Inserts
Right Hand
Left Hand
Right Hand, Top View
Left Hand, Top View
Internal Grooving
Groove | ||||||||
|---|---|---|---|---|---|---|---|---|
| Insert Code | Wd. | Dp. | Thick. | Tip Radius | O'all Ht. | For Use On | Each | |
AC3 Carbide | ||||||||
Right Hand | ||||||||
| G-3031R | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 000000 |
| G-3062R | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3094R | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| G-3125R | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
Left Hand | ||||||||
| G-3031L | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3062L | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 000000 | 00000 |
| G-3094L | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
| G-3125L | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Brass, Bronze, Cast Iron, Stainless Steel | 0000000 | 00000 |
AC50 Carbide | ||||||||
Right Hand | ||||||||
| G-3031R | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Steel | 000000 | 00000 |
| G-3062R | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3094R | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3125R | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
Left Hand | ||||||||
| G-3031L | 0.031" | 0.05" | 0.195" | 0.005" | 0.344" | Steel | 000000 | 00000 |
| G-3062L | 0.062" | 0.12" | 0.195" | 0.010" | 0.344" | Steel | 000000 | 00000 |
| G-3094L | 0.094" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
| G-3125L | 1/8" | 0.18" | 0.195" | 0.010" | 0.344" | Steel | 0000000 | 00000 |
Turning Carbide Insert Holders
Secure carbide inserts inside these holders for stable turning. They’re also known as indexable insert holders. Select a holder that’s compatible with your insert by matching the insert style and inscribed circle diameter (IC). Right-hand holders move from right to left toward the lathe chuck, left-hand holders move from left to right away from the lathe chuck, and neutral holders can cut in either direction.
M-code holders secure inserts with both a top clamp and a pin lock, so they’re often used for interrupted or semi-interrupted cuts to keep inserts stable despite vibration. They’re the most commonly used holders with negative-rake inserts.
S-code holders secure inserts with a screw for easy indexing. They’re the most commonly used holders with positive-rake inserts.
C-code holders secure inserts with a top clamp, leaving space for you to add a plate-type chipbreaker between the insert and the clamp.
Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.
For technical drawings and 3-D models, click on a part number.
MDJN Holders with Offset Shank—For DNGA, DNGG, DNGM, DNGP, DNGQ, DNGX, DNMA, DNMG, DNMM, DNMP, DNMS, DNMU, DNMX Inserts
Right Hand
Left Hand
Holders | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | |||||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | Each | Each | |||||
For Along-the-Length Turning, Chamfering, External Profiling | ||||||||||||||
Right Hand | ||||||||||||||
| 1/2" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 0000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 | 00000000 | 000000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | ||||||||||||||
| 1/2" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
MTAN Holders with Straight Shank—For TNGA, TNGG, TNGM, TNGP, TNMA, TNMG, TNMM, TNMP, TNMS, TNMU, TNMX Inserts
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | End Cutting Edge Angle | Each | Each | Each | Each | Each | |||||
For Along-the-Length Turning, Chamfering, External Profiling, Facing | |||||||||||||||
Right Hand | |||||||||||||||
| 3/8" | 1/8" | 5/8" | 5/8" | 4 1/2" | 15° | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2" | 3/16" | 1" | 1" | 6" | __ | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 3/8" | 1/8" | 5/8" | 5/8" | 4 1/2" | 15° | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1/2" | 3/16" | 1" | 1" | 6" | __ | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
MTGN Holders with Offset Shank—For TNGA, TNGG, TNGM, TNGP, TNMA, TNMG, TNMM, TNMP, TNMS, TNMU, TNMX Inserts
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | End Cutting Edge Angle | Each | Each | Each | Each | Each | |||||
For Along-the-Length Turning, Chamfering, External Profiling, Facing | |||||||||||||||
Right Hand | |||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | __ | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 27° | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | __ | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 27° | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
MTJN Holders with Offset Shank—For TNGA, TNGG, TNGM, TNGP, TNMA, TNMG, TNMM, TNMP, TNMS, TNMU, TNMX Inserts
Right Hand
Left Hand
Holders | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | |||||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | Each | Each | |||||
For Along-the-Length Turning, Chamfering, External Profiling, Facing | ||||||||||||||
Right Hand | ||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | ||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1/2" | 3/16" | 1" | 1" | 6" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 | 00000000 | 00000 |
SDJC Holders with Offset Shank—For DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW Inserts
Right Hand
Left Hand
Holders | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Torx Screws | Replacement Torx Keys | |||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | |||
For Along-the-Length Turning, Chamfering, External Profiling, Facing | ||||||||||
Right Hand | ||||||||||
| 1/4" | 3/32" | 3/8" | 3/8" | 3 1/2" | 00000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 1/4" | 3/32" | 1/2" | 1/2" | 4" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 1/2" | 1/2" | 4" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 5/8" | 5/8" | 4 1/2" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | ||||||||||
| 1/4" | 3/32" | 3/8" | 3/8" | 3 1/2" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 1/4" | 3/32" | 1/2" | 1/2" | 4" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 1/2" | 1/2" | 4" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 5/8" | 5/8" | 4 1/2" | 00000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 5/32" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
SVJB Holders with Offset Shank—For VBGA, VBGT, VBGW, VBGX, VBMA, VBMT, VBMW, VCGT, VCGW, VCGX, VCMA, VCMT, VCMW Inserts
Right Hand
Left Hand
Holders | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Torx Screws | Replacement Torx Keys | |||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | |||
For Along-the-Length Turning, Chamfering, External Profiling | ||||||||||
Right Hand | ||||||||||
| 3/8" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 0000000 | 0000000 | 00000 | 0000000 | 00000 |
| 3/8" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
Left Hand | ||||||||||
| 3/8" | 3/16" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
| 3/8" | 3/16" | 1" | 1" | 6" | 00000000 | 000000 | 0000000 | 0000 | 0000000 | 0000 |
CTAP Holders with Straight Shank—For TPG, TPMR, TPU Inserts
Right Hand
Left Hand
Holders | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Insert | Shank | Replacement Clamps | Replacement Clamp Clips | Replacement Clamp Screws | Replacement Seats | Replacement Seat Screws | Triangle Chipbreakers | |||||||||||
| Inscribed Circle Dia. (IC) | Thick. | Wd. | Ht. | O'all Lg. | Each | Each | Each | Each | Each | Each | Each | |||||||
For Along-the-Length Turning, Chamfering, External Profiling, Facing | ||||||||||||||||||
Right Hand | ||||||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | 00000000 | 00000 |
Left Hand | ||||||||||||||||||
| 3/8" | 1/8" | 3/4" | 3/4" | 4 1/2" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 | 00000000 | 0000 |