About Grease
More
About Oil
More
About Lubricants
More
Moisture-Resistant Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1288k12p1-g02a-digital@halfx_637032262372845373.png?ver=imagenotfound)
Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.
Grease lubricates most efficiently within the listed temperature range.
Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637032674437108591.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450-@halfx_637037121525113338.png?ver=imagenotfound)
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.
Mineral-oil-based grease, derived from petroleum, is more economical than synthetic-oil-based grease. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with lithium thickener offers good heat and moisture resistance. Grease with PTFE thickener has good heat, moisture, and oxidation resistance. Grease with silica thickener resists washing off and reduces corrosion in wet environments. Grease with barium thickener is for use with silicone rubber O-rings and seals in open systems.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. Grease with zinc neutralizes acid and is a good replacement for leaded grease.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
DuPont Molykote 55 O-Ring Grease is silicone-based, so it can be used with most rubbers and plastics. Not recommended for use with silicone rubber, polycarbonate plastic, or ABS plastic. Chemours Krytox™ 240AC Type III resists most acids, bases, solvents, and fuels, and is long lasting with an indefinite shelf life. Loctite® Krytox™ RFE PFPE LB 8209 handles extreme temperature swings, resists acids, bases, and fuels, and is long lasting. It can be used under high loads.
Jet-Lube Ezy-Open is a grease-like liquid that contains detergent and PTFE additives to clean more effectively than grease while it lubricates. Since it is a liquid, it does not have a NLGI viscosity grade, but is less viscous than anything else in our offering.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, fl. oz. | Net Weight, lbs. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | |||||||||||
2 | Synthetic | Moly | __ | 8 | Pail | -85° to 350° | 425° | White | __ | 0000000 | 0000000 |
2 | Synthetic | Moly | 5.3 | __ | Tube | -85° to 350° | 425° | White | __ | 0000000 | 00000 |
Chemours Krytox™ 240AC Type III—PTFE Thickener | |||||||||||
2 | Synthetic | __ | 2 | __ | Tube | -30° to 550° | Not Rated | White | MIL-PRF-27617 | 00000000 | 000000 |
2 | Synthetic | __ | 8 | __ | Tube | -30° to 550° | Not Rated | White | MIL-PRF-27617 | 00000000 | 00000000 |
Loctite® Krytox™ RFE PFPE LB 8209—PTFE Thickener | |||||||||||
2 | Synthetic | __ | 2 | __ | Tube | -15° to 500° | Not Rated | White | __ | 0000000 | 00000 |
Jet-Lube Ezy-Open Liquid—Silica Thickener | |||||||||||
__ | Synthetic | PTFE | __ | 35 | Pail | -10° to 400° | Not Rated | Amber | __ | 0000000 | 000000 |
Lubriplate Aero—Lithium Thickener | |||||||||||
1 | Mineral | Zinc | 1.8 | __ | Tube | -70° to 250° | 380° | Off-White | __ | 0000000 | 0000 |
Barium Thickener | |||||||||||
2 | Mineral | __ | 4 | __ | Tube | 0° to 300° | 410° | Amber | __ | 0000000 | 00000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | ||||||||||
2 | Synthetic | Moly | 5.3 | Tube | -85° to 350° | 425° | White | 12 | 00000000 | 0000000 |
Lubriplate Aero—Lithium Thickener | ||||||||||
1 | Mineral | Zinc | 1.8 | Tube | -70° to 250° | 380° | Off-White | 36 | 00000000 | 000000 |
Barium Thickener | ||||||||||
2 | Mineral | __ | 4 | Tube | 0° to 300° | 410° | Amber | 24 | 00000000 | 000000 |
Vacuum Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637032674437108591.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/102/10295k29p1-g02a-digital@halfx_637032252940234753.png?ver=imagenotfound)
A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening and is comparable to Fomblin grease. NLGI 3.5 is between the consistency of vegetable shortening and frozen yogurt.
Grease with PTFE thickener resists aggressive acids, bases, and solvents. Chemours Krytox™ 240 grease is long lasting with an indefinite shelf life.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Net Weight, lbs. | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Specifications Met | Each | |
DuPont Molykote High Vacuum Grease—Silica Thickener | |||||||||||
3.5 | Synthetic | __ | 8 | Pail | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | __ | 0000000 | 0000000 |
3.5 | Synthetic | 5.3 | __ | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | __ | 0000000 | 00000 |
Chemours Krytox™ 240AB Type II—PTFE Thickener | |||||||||||
2 | Synthetic | 1/2 | __ | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
2 | Synthetic | 2 | __ | Tube | -40° to 450° | Not Rated | 5×10^-6 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
Chemours Krytox™ 240AZ Type I—PTFE Thickener | |||||||||||
1 | Synthetic | 1/2 | __ | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 00000 |
1 | Synthetic | 2 | __ | Tube | -70° to 300° | Nonmelting | 4×10^-4 torr @ 100° F | White | MIL-PRF-27617 | 00000000 | 000000 |
PTFE Thickener | |||||||||||
3 | Synthetic | 3 1/2 | __ | Tube | 0° to 480° | 525° | 7.5×10^-4 torr @ 72° F | White | __ | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote High Vacuum Grease—Silica Thickener | ||||||||||
3.5 | Synthetic | 5.3 | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | 12 | 00000000 | 0000000 |
Chemical-Resistant Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/101/10195k77p1-g02a-digital@halfx_637032181675964373.png?ver=imagenotfound)
Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2.5 is between the consistencies of peanut butter and vegetable shortening. NLGI 3 is about the consistency of vegetable shortening.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | |||||||||
2.5 | Synthetic | Moly | 19.4 | Grease Gun Cartridge | -20° to 450° | 570° | White | 0000000 | 0000000 |
Food Industry Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/929/92930a450-@halfx_637037121525113338.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/101/10195k77p1-g02a-digital@halfx_637032181675964373.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637032674437108591.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1288k19p1-g02a-digital@halfx_637032197225720573.png?ver=imagenotfound)
This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water. Formulated with silica thickener and silicone, it resists washing away and has excellent resistance to wear. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2.5 is between the consistencies of peanut butter and vegetable shortening.
Grease lubricates most efficiently within the listed temperature range.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Each | |
DuPont Molykote 111 Compound—Silica Thickener | |||||||||||
2.5 | Synthetic | Silicone | 5.3 fl. oz. | __ | Tube | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
2.5 | Synthetic | Silicone | 14 fl. oz. | __ | Grease Gun Cartridge | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 00000 |
2.5 | Synthetic | Silicone | __ | 8 lbs. | Pail | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Net Weight | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 111 Compound—Silica Thickener | ||||||||||||
2.5 | Synthetic | Silicone | __ | 0.2 oz. | One-Time-Use Pack | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 100 | 00000000 | 0000000 |
2.5 | Synthetic | Silicone | 5.3 fl. oz. | __ | Tube | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 12 | 00000000 | 000000 |
2.5 | Synthetic | Silicone | 14 fl. oz. | __ | Grease Gun Cartridge | -40° to 395° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 10 | 00000000 | 000000 |
Clean Room Seal and O-Ring Grease
![](/prerenderstable/mvPRE/contents/gfx/imagecache/102/10295k29p1-g02a-digital@halfx_637032252940234753.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/101/10195k92p1-g02a-digital@halfx_637032148208394452.png?ver=imagenotfound)
Highly pure, this grease is chemically inert, so it won’t contaminate sensitive environments or react with other substances. Due to its low vapor pressure, it resists evaporation, even at high temperatures. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | Each | |||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
Chemours Krytox™ LVP—PTFE Thickener | ||||||||
2 | Synthetic | 2 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 0000000 |
2 | Synthetic | 8 | Tube | 5° to 570° | Nonmelting | White | 00000000 | 000000 |
2 | Synthetic | 14 | Grease Gun Cartridge | 5° to 570° | Not Rated | White | 00000000 | 00000000 |
Milling, Turning, and Sawing Lubricants for Aluminum and Copper
![](/prerenderstable/mvPRE/contents/gfx/imagecache/461/46125t7p1-g02a-digital@halfx_637033012091368151.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k36p1-g02a-digital@halfx_637032674437108591.png?ver=imagenotfound)
Also known as plumber's lard oil, these light-colored, sulfur-free lubricants won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
Container | ||||
---|---|---|---|---|
Size, gal. | Type | Compatible With | Each | |
1 | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
5 | Pail | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Container | |||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Pkg. Qty. | Pkg. | |
1 | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 6 | 00000000 | 0000000 |
Seal and O-Ring Oil
![](/prerenderstable/mvPRE/contents/gfx/imagecache/102/10295k29p1-g02a-digital@halfx_637032252940234753.png?ver=imagenotfound)
Apply directly to seals and O-rings to extend service life by preventing drying and cracking. This oil can be used with virtually any rubber polymer, including Buna-N and neoprene.
Viscosity is the thickness of an oil. Rated at 100,000 centistokes (cSt), this oil has the consistency of honey, so it stays in place.
Paraffin Wax Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/108/1085k92p2-j03-digital@halfx_636851394366687252.png?ver=imagenotfound)
An economical alternative to beeswax, paraffin wax can be used to lubricate tools or to seal containers against water seepage.
Paraffin Wax Beads
![](/prerenderstable/mvPRE/contents/gfx/imagecache/108/1085k91p1-j03-digital@halfx_636851437080052047.png?ver=imagenotfound)
An economical alternative to beeswax, paraffin wax can be used to lubricate tools or to seal containers against water seepage.
Paraffin Wax Candles
![](/prerenderstable/mvPRE/contents/gfx/imagecache/108/1085k96p2-j03-digital@halfx_636851249092340676.png?ver=imagenotfound)
These candles are also known as plumbers' candles. An economical alternative to beeswax, paraffin wax can be used to lubricate tools or to seal containers against water seepage.
Dia. | Lg. | Softening Temperature, ° F | Color | Pkg. Qty. | Pkg. | |
1 1/8" | 4 1/2" | 130° | White | 3 | 0000000 | 00000 |