2024 Aluminum Plates | McMaster-Carr

Filter by

System of Measurement

Thickness

Width

Length

Shape

Temper Designation

Hardness Rating

Certificate Type

Material Certificate with Traceable Lot Number

Tolerance Rating

Appearance

Specifications Met

Yield Strength

30,000 psi to 99,999 psi

Fabrication

Performance

Heat Treatment

Hardness

Export Control Classification Number (ECCN)

REACH

DFARS Specialty Metals

RoHS

Maximum Temperature

Elongation

Minimum Temperature

Heat Treatable

Finish

245 Products

About Aluminum

Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.

High-Strength 2024 Aluminum Sheets and Bars

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Cold-rolled sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.

Cold-drawn bars are formed by a die for close-tolerance widths, then cut to the lengths listed.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Sheets

Yield Strength: 41,000 psi
Hardness: Brinell 120 (Medium)
Temper:
0.020" to 0.190" thick. sheets: T3
All other sizes: T351
Fabrication: Cold Rolled
Specifications Met: ASTM B209

6" × 6"
Thick.	Thick. Tolerance	Heat Treatment	Temperature Range, °F		Each
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	00000000	00000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	00000000	00000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	00000000	00000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	00000000	00000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	00000000	000000
1 1/4"	-0.047" to 0.047"	Hardened	-320° to 300°	00000000	000000
1 1/2"	-0.047" to 0.047"	Hardened	-320° to 300°	00000000	000000
8" × 8"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	0000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	0000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	0000000	00000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	0000000	00000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	0000000	000000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	0000000	000000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	0000000	000000
12" × 12"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	0000000	000000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	0000000	000000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	0000000	000000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	0000000	000000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	0000000	000000
12" × 24"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	00000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	00000000	000000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	00000000	000000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	00000000	000000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	00000000	000000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	00000000	000000
18" × 18"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	00000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	00000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	000000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	0000000	000000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	0000000	000000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	0000000	000000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	0000000	000000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	0000000	000000
24" × 24"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	00000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
1/4"	-0.014" to 0.014"	Hardened	-320° to 300°	0000000	000000
3/8"	-0.017" to 0.017"	Hardened	-320° to 300°	0000000	000000
1/2"	-0.023" to 0.023"	Hardened	-320° to 300°	0000000	000000
3/4"	-0.031" to 0.031"	Hardened	-320° to 300°	0000000	000000
1"	-0.047" to 0.047"	Hardened	-320° to 300°	0000000	000000
24" × 48"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	00000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.160"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	000000
48" × 48"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	00000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	00000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	00000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	00000000	00000000
48" × 72"
0.020"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.025"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.032"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.040"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.050"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.063"	-0.002" to 0.002"	Hardened	-320° to 300°	000000000	000000
0.080"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.090"	-0.003" to 0.003"	Hardened	-320° to 300°	000000000	000000
0.100"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
1/8"	-0.004" to 0.004"	Hardened	-320° to 300°	000000000	000000
0.190"	-0.007" to 0.007"	Hardened	-320° to 300°	000000000	00000000

Bars

Yield Strength: 47,000 psi
Hardness: Brinell 120 (Medium)
Fabrication: Cold Drawn
Temper:
1/8" to 3/8" thick. bars: T4
All other sizes: T351
Specifications Met: ASTM B211

1/8" Thick. (-0.002" to 0.002" Tolerance)
Wd.	Heat Treatment	Temperature Range, °F		1/2 ft. Lg.	1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	6 ft. Lg.
1"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
3/16" Thick. (-0.002" to 0.002" Tolerance)
1/2"	Hardened	-320° to 300°	000000000	0000	0000	00000	00000	00000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1/4" Thick. (-0.002" to 0.002" Tolerance)
1/4"	Hardened	-320° to 300°	00000000	0000	00000	00000	00000	00000
1/2"	Hardened	-320° to 300°	000000000	0000	00000	00000	00000	00000
3/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
2 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
3"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
4"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
3/8" Thick. (-0.002" to 0.002" Tolerance)
3/8"	Hardened	-320° to 300°	00000000	0000	00000	00000	00000	00000
1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
3/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
3"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
6"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
1/2" Thick. (-0.002" to 0.002" Tolerance)
1/2"	Hardened	-320° to 300°	00000000	00000	00000	00000	00000	00000
3/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	00000
1"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 3/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
4"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
6"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
5/8" Thick. (-0.003" to 0.003" Tolerance)
5/8"	Hardened	-320° to 300°	00000000	00000	00000	00000	00000	00000
3/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
3/4" Thick. (-0.003" to 0.003" Tolerance)
3/4"	Hardened	-320° to 300°	00000000	00000	00000	00000	00000	000000
1"	Hardened	-320° to 300°	000000000	00000	00000	00000	00000	000000
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	00000	000000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
3 1/2"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
4"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
1" Thick. (-0.003" to 0.003" Tolerance)
1"	Hardened	-320° to 300°	00000000	00000	00000	00000	00000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
1 3/4"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
3 1/2"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
5"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
6"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
1" Thick. (-0.0025" to 0.0025" Tolerance)
1 1/4"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
1 1/8" Thick. (-0.003" to 0.003" Tolerance)
1 1/8"	Hardened	-320° to 300°	00000000	00000	00000	00000	000000	000000
1 1/4" Thick. (-0.003" to 0.003" Tolerance)
1 1/4"	Hardened	-320° to 300°	00000000	00000	00000	000000	000000	000000
1 1/2"	Hardened	-320° to 300°	000000000	00000	00000	000000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
4"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
1 1/2" Thick. (-0.003" to 0.003" Tolerance)
1 1/2"	Hardened	-320° to 300°	00000000	00000	00000	000000	000000	000000
2"	Hardened	-320° to 300°	000000000	00000	000000	000000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
1 3/4" Thick. (-0.005" to 0.005" Tolerance)
1 3/4"	Hardened	-320° to 300°	00000000	00000	00000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
4"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	00000000
2" Thick. (-0.005" to 0.005" Tolerance)
2"	Hardened	-320° to 300°	00000000	00000	000000	000000	000000	000000
2 1/2"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
3"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	000000
4"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	00000000
2 1/4" Thick. (-0.008" to 0.008" Tolerance)
2 1/4"	Hardened	-320° to 300°	00000000	000000	000000	000000	000000	000000
2 1/2" Thick. (-0.008" to 0.008" Tolerance)
3"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	00000000
6"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	00000000
3" Thick. (-0.008" to 0.008" Tolerance)
4"	Hardened	-320° to 300°	000000000	000000	000000	000000	000000	00000000
6"	Hardened	-320° to 300°	000000000	000000	000000	000000	00000000	00000000
3 1/2" Thick. (-0.01" to 0.01" Tolerance)
3 1/2"	Hardened	-320° to 300°	00000000	000000	000000	000000	000000	00000000
4" Thick. (-0.01" to 0.01" Tolerance)
4"	Hardened	-320° to 300°	00000000	000000	000000	000000	000000	00000000

Tight-Tolerance High-Strength 2024 Aluminum Sheets and Bars

Yield Strength: 47,000 psi
Hardness: Brinell 120 (Medium)
Temper: T351
Fabrication: Hot Rolled
Specifications Met: ASTM B209, SAE AMS-QQ-A-250/4, SAE AMS4035

Also known as flat stock, these sheets and bars are precision ground on the top and bottom. The sides have a cut or milled edge. While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Thick.	Thick. Tolerance	Heat Treatment	Temperature Range, °F	Flatness Tolerance		2" × 12"	4" × 12"	6" × 12"	6" × 24"	8" × 8"	12” × 12”	12” × 24”	18" × 18"	24” × 24”
1/4"	-0.002" to 0.002"	Hardened	-320° to 300°	0.010"	0000000	000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000	0000000
3/8"	-0.002" to 0.002"	Hardened	-320° to 300°	0.010"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000
1/2"	-0.002" to 0.002"	Hardened	-320° to 300°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000
1"	-0.002" to 0.002"	Hardened	-320° to 300°	0.005"	0000000	000000	000000	000000	000000	000000	000000	000000	000000	00000000

Clad High-Strength 2024 Aluminum Sheets

Yield Strength:
6" × 6": 45,000 psi
All other sizes: 42,000 psi
Hardness: Not Rated
Temper: T3
Fabrication: Cold Rolled
Specifications Met: ASTM B209, SAE AMS-QQ-A-250/5, SAE AMS4462

These sheets are clad in 1230 aluminum for an added layer of corrosion resistance. While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

6” × 6”
Thick.	Thick. Tolerance	Heat Treatment	Temperature Range		Each
0.016"	-0.0030" to 0.0030"	Hardened	-320° F to 300° F	0000000	00000
0.025"	-0.0020" to 0.0020"	Hardened	-320° F to 300° F	0000000	0000
0.032"	-0.0020" to 0.0020"	Hardened	-320° F to 300° F	0000000	0000
0.040"	-0.0030" to 0.0030"	Hardened	-320° F to 300° F	0000000	0000
0.050"	-0.0040" to 0.0040"	Hardened	-320° F to 300° F	0000000	0000
0.090"	-0.0050" to 0.0050"	Hardened	-320° F to 300° F	0000000	00000
12" × 12"
0.016"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.025"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.032"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.040"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.050"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.063"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.090"	-0.0025" to 0.0025"	Hardened	Not Rated	0000000	00000
0.125"	-0.0035" to 0.0035"	Hardened	Not Rated	0000000	00000
24” × 24”
0.016"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.025"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.032"	-0.0015" to 0.0015"	Hardened	Not Rated	0000000	00000
0.040"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.050"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	00000
0.063"	-0.0020" to 0.0020"	Hardened	Not Rated	0000000	000000
0.090"	-0.0025" to 0.0025"	Hardened	Not Rated	0000000	000000
0.125"	-0.0035" to 0.0035"	Hardened	Not Rated	0000000	000000