Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Kevlar is a super-tough material that stands up to wear and abrasion.

Also known as solderless breadboards. A contact point inside each hole creates a connection without soldering.

Drill holes of any size and etch your own circuit board design into copper-clad boards.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

The most commonly used 3D printing material, these PLA filaments make detailed parts at a low melting point, so they won’t warp as they cool, rarely clog nozzles, and don’t require a heated printer bed.

Stretchy, soft, and sturdy, these filaments make durable parts that resist wear and breakage despite repeated use. Stronger than ABS and PLA filaments, they create long-lasting, wear-resistant parts, such as seals, sleeves, and gaskets, as well as components that take on high-impact forces, such as springs and snap-fit parts.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.