Make cuts in most rigid plastic pipe and tube. Rollers have a groove for clearance to cut flared tube ends with little material loss. An enclosed adjustment screw prevents damage from chips and debris.

Ratchet action permits cutting in cramped areas, and moves the cutter 360° around a pipe.

This set contains three of the most common sizes of tube cutters, neatly packed in a convenient carrying case. These cutters require less than 1 1/4" of space around them, making them ideal for use in crowded tubing systems. Also known as c-cutters, they don’t have a handle that gets in the way as you spin them to cut. Pick the right size for your job then snap the cutter onto your tubing. A spring-loaded cutting wheel tightens as you turn it. Make sure to rotate it in the same direction as the arrows etched on the cutter.

Needing less than 1 1/2" of space around them, these cutters are great for crowded tubing systems. Their C-shape keeps them compact because there's no handle to get in the way as you spin them around your tubing. Snap them onto your tubing and a spring-loaded cutting wheel tightens as you turn them. Make sure to rotate it in the same direction as the arrows etched on the cutter.

Use to cut plastic and rubber tubing.

Fit this compact cutter into your pocket or tool belt. Use it to cut plastic and rubber tubing. It has a spring-loaded frame.

Cutters with a stainless steel blade resist corrosion.

Cutters with a bead chain or lanyard can be securely clipped onto a tool belt or other surface. Those with a lanyard do not need to be unclipped before use—the lanyard will stretch so you can make nearby cuts.

Make quick, perpendicular cuts on flexible tubing and hose to reroute flow and add fittings.

Styles B and C have a V-shaped blade that cleanly cuts through tubing and hose without flattening it. This creates a secure, leak-free connection point for fittings.

Stainless steel cutters resist rust, even when exposed to water.

Spring-assisted cutters have jaws that open automatically when you release the handles.

Cut PEX tubing with one or two twists. These cutters automatically adjust pressure during cutting to prevent distorting the tube end, so it's easy to attach fittings.

Slice through thick plastic pipe up to 2” in diameter in only three seconds. These cutters are light enough to carry around and are good for up to 200 cuts on a single battery charge. Easy to use with one hand, they make perpendicular cuts with the pull of a trigger. The harder you press down on the trigger, the faster they cut. They don’t leave any burrs behind on your pipe, so you’ll have a clean edge to install a fitting. Since the blade is stainless steel and the jaw is aluminum, you don’t have to worry about rust when cutting through wet pipe.

Unlike manual cutters, there’s no need to repeatedly make adjustments or rotate them around your pipe. This makes them good for confined spaces—they need less than half an inch of clearance to cut through a pipe installed near a wall.

To prevent accidental cuts, you have to press a safety button as you pull the trigger. They also have a button that folds the blade into the head to keep it out of the way when not in use.

The battery and charger are sold separately.

Avoid tiring your hand while making repeated cuts in a variety of material—from plastic pipes to wood dowel pins. These cutters ratchet to increase leverage, so they don’t require as much effort to squeeze the handles as standard multipurpose cutters. They slice through leather, plastic, rubber, and wood and come with multiple anvils for different jobs, reducing the number of tools you need to keep on hand. Made of stainless steel, their blade resists rusting if rinsed with water or rained on.

Swap out the anvils with the included L-key. For flat material, use the flat anvil. The 90° anvil stabilizes uneven material before you cut. For accurate cuts at precise angles, the miter angle anvil is notched at 15° from 45° to 120°. To stabilize pipes and tubes before cutting, use the anvils that match your tube OD.

A blade made of carbon steel cuts plastic pipe, plasterboard, and plywood.

Teeth sharpened on three sides make fast, accurate cuts in wood and plastic.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel. Made of silicon carbide and aluminum oxide abrasives, these wheels won’t clog or burn when cutting through nonmetals. Attach them to your bench-top cutoff saw to make burr-free cuts in pipes, bars, and sheets. You shouldn’t use these wheels with handheld saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.