Add numbers, abbreviations, and symbols to indicate specific hazards and the degree of hazard using these NFPA (National Fire Protection Association) signs.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

The illustrations on these signs help workers identify hazards at a glance.

Similar to a Safety Data Sheet (SDS), these signs keep workers informed about chemical and gas usage, warnings, and treatment in the event of exposure.

Alert others to the presence of chemicals such as carbon monoxide, tobacco smoke, and wood dust.

The illustrations on these signs help you identify electrical hazards at a glance.

Specify the printed message you'd like to appear under the header.

The illustrations on these signs help workers identify hazards at a glance.

Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.

Stack these signs when not in use. They have the same message printed on all four sides to help prevent accidents around slippery floors.

Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.

The illustrations on these signs help workers identify confined areas at a glance.

Warn against forklift traffic, mark pedestrian crossings, and provide safety reminders to drivers.

The illustrations on these signs help workers identify areas with moving vehicle hazards at a glance.

Designate areas that require personal protective equipment such as safety glasses and earmuffs.

Use the included symbols to inform workers of all the personal protection equipment required.

Write a message in the blank space below the header using a permanent marker or adhesive-back characters.

The illustrations on these signs help workers identify restricted areas at a glance.

Attach these signs to the top of any traffic cone.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.

For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store.

Identify the presence of hazardous materials with D.O.T.-regulated numbers, symbols, and messages.

Visually identify a slow-moving vehicle.

Designate parking spaces that are accessible.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Communicate two- or four-way stops with one freestanding stop sign.

Plastic signs can be used outdoors.

Fill in the blank with your own custom warnings, labels, and messages. You can write on these signs with markers, add color with paint, or stick on adhesive-back characters. Many even work with printers.

Attach these signs to the top of any traffic cone.

Specify the message you'd like printed on your sign.

Identify and organize aisles, work areas, and entrances with large, easy-to-read numbers and letters.

Clearly mark areas of your facility with these signs.

Provide receiving and shipping hours in the blank spaces.

Engraved letters and beveled edges provide a polished look.

Label restrooms in your facility.

Mark areas where people can wait for assistance going down stairs in an emergency.

Expose these signs to ambient light and they stay visible in the dark.

Define lockout and tagout procedures to help prevent unexpected startups during machine maintenance and repair work.

Keep workers informed about globally harmonized system (GHS) symbols and when to use them.

Communicate hand signals for directing crane operation.

Motivate employees to follow good work and safety practices.

These scoreboards automatically count days.

These signs project from the wall so the same message is viewable from multiple angles.

These signs project from the wall so the same message is viewable from multiple angles.

Provide information about CPR, treating minor burns, and other emergency first-aid measures.

Engraved letters and beveled edges provide a polished look.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Engraved letters and beveled edges provide a polished look.

These signs meet federal regulations for the visually impaired and help comply with the Americans with Disabilities Act (ADA) when installed properly.

Identify the location of exits throughout a facility.

Mount these signs perpendicular to the wall to view the same message on each side.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

These signs are lit from within for high visibility. They meet UL 924 regulations for visibility.

Use the included bracket to mount these signs perpendicular to a wall or ceiling. They meet UL 924 regulations for visibility.

Communicate dangers to workers near equipment that could cause injury.

Add hazard symbols to an existing label or use alone to communicate hazards at a glance.

Identify hazards and unsafe practices that can injure workers around conveying equipment. These labels meet or exceed Conveyor Equipment Manufacturers Association standards and have headers that meet OSHA/ANSI standards for indicating hazards.

A reference chart explains the NFPA (National Fire Protection Association) color and number designations for hazards. Provide the appropriate code number using the NFPA diamond.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

Mark hazardous materials and write in information to ensure they are stored and handled properly.

The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.

The graphics on these labels identify hazardous materials and provide safety reminders.

Indicate voltage and identify power lines, conduit, fuse boxes, switches, and other electrical equipment.

The headers and illustrations on these labels help workers identify electrical hazards at a glance.

Add electrical hazard symbols to an existing label or use alone to communicate hazards at a glance.

Add a photo in the designated square to identify the employee working a job.

The headers and illustrations on these labels help workers identify lockout reminders at a glance.

Specify the printed message you’d like to appear under the header of these labels.

Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom.

The graphics on these labels identify areas that require personal protective equipment, such as safety goggles and boots.

Identify dangerous areas to restrict access to authorized personnel.

The illustrations on these labels help workers identify restricted areas at a glance.

Post safety instructions for drivers.

The illustrations on these labels help workers identify confined spaces at a glance.

Use color to identify equipment, materials, and documents at a glance.

Includes blue, green, red, and yellow labels for color coding to identify equipment, materials, and documents at a glance. These labels easily peel off when they’re no longer needed.

Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.

These dispensers make it quick and easy to peel off a label when you’re ready to use one. Dispensers have a serrated edge for cutting.

Change your message and its location without using a new label. These labels have a surface you can write on with a dry-erase marker.

A layer of aluminum foil in these labels will set off metal detectors if they fall into your food-processing line.

Use a permanent marker to write your message.

The adhesive on these labels withstands temperatures from -320° to 300° F. Stick them to plastic, glass, and metal surfaces.

Write on these labels to mark equipment with a company name and address or ID number.

Choose from labels with numbers or days of the week to keep track of inventory.

The messages on these labels clearly display the status of materials. Write additional information in the spaces provided with a permanent marker.

Good for large-volume jobs, these labels come on perforated sheets that can be fed continuously through a pin-feed printer.

Run these sheets of labels through any standard laser or inkjet printer.