Vise-Mount Tube Flarers and Reamers for 37° Flares
Ream and flare both soft and hard metal tubing so it’s compatible with flared tube fittings. 37° flares are used in high-pressure applications. This tool consists of a flaring head and a tube holder. Type M hard copper should be annealed before flaring.
| For Tube OD | For Tube OD for Reaming | Lg. | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | ||||
|---|---|---|---|---|
| 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" | 1/4", 5/16", 3/8", 1/2", 5/8" | 6 1/8" | 0000000 | 0000000 |
Vise-Mount Tube Flarers for 37° Flares
Create flares in metal tubing so it’s compatible with flared tube fittings. 37° flares are used in high-pressure applications. These tools consist of a flaring head and a tube holder. Type M hard copper and stainless steel should be annealed before flaring.
Hand-Held Tube Flarers for 37° Flares
Create flares in soft metal tubing so it’s compatible with flared tube fittings. 37° flares are used in high-pressure applications. These tools consist of a flaring head and a tube holder.
Hand-Held Tube Flarers for 45° Flares
Form 45° flares in aluminum, brass, or copper tubing so it’s compatible with flared tube fittings often used in low-pressure plumbing, air conditioning, and refrigeration systems. All of these tools have a flaring head and a tube holder that firmly grips your tube.
For consistent flares, style B have a depth gauge to properly position your tube.
A one-hand clamping mechanism on style C makes working on overhead jobs easier.
To increase installation speed and minimize hand fatigue, style E have an adapter that connects to cordless screwdrivers to turn these manual tools into power tools. An automatic depth stop positions your tube for precise, repeatable flares. A one-hand clamping mechanism makes working on overhead jobs easier.
| Style | For Tube OD | For Copper Tube Size  | Lg. | For Square Drive Size | Includes | Each | |
For Aluminum, Brass, Copper | |||||||
|---|---|---|---|---|---|---|---|
| A | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 1/4, 3/8, 1/2, 5/8 | 6 3/4" | __ | __ | 000000 | 0000000 |
| A | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" | 1/4, 3/8, 1/2 | 7" | __ | __ | 0000000 | 00000 |
| B | 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" | 1/4, 3/8, 1/2, 5/8 | 8" | __ | __ | 0000000 | 000000 |
| C | 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" | 1/4, 3/8, 1/2 | 10" | __ | __ | 000000 | 000000 |
For Aluminum, Copper | |||||||
| A | 3/4", 7/8", 1", 1 1/8" | 5/8, 3/4, 1 | 7" | __ | __ | 0000000 | 000000 |
For Copper | |||||||
| D | 4mm, 3/16", 6mm, 1/4", 5/16", 8mm, 3/8", 10mm, 12mm, 1/2", 15mm, 5/8", 16mm | 1/4, 3/8, 1/2 | 4 5/8" | __ | __ | 0000000 | 00000 |
| E | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" | 1/4, 3/8, 1/2, 5/8 | 9 1/4" | 3/8" | 1/8"-1 1/8" Tube Cutter, 3/8" Male Square Drive × 5/16" Hex Shank Adapter for Power Tools | 0000000 | 000000 |
Hammer-Driven Tube Flarers for 45° Flares
Tap this tool with a hammer to quickly form 45° flared ends in copper tubing. These flarers work faster than standard hand-held tube flarers but are less precise. A 45° flare forms a tight seal with a flared tube fitting and nut for low-pressure applications.
For additional stability, clamp tubing in a bench vise tube holder.
Tube Flarers | Bench Vise Tube Holders | ||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | For Copper Tube Size | Lg. | Material | Each | Each | ||
For Copper | |||||||
| 1/2" | 3/8 | 2 3/4" | Steel | 0000000 | 000000 | 0000000 | 000000 |
| 5/8" | 1/2 | 2 3/4" | Steel | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 5/8 | 3 1/4" | Steel | 0000000 | 00000 | 000000 | 00 |
| 7/8" | 3/4 | 3 1/2" | Steel | 0000000 | 00000 | 000000 | 00 |
| 1 1/8" | 1 | 4" | Steel | 0000000 | 00000 | 000000 | 00 |
| 1 3/8" | 1 1/4 | 4 1/4" | Steel | 0000000 | 00000 | 000000 | 00 |
| 1 5/8" | 1 1/2 | 4 1/2" | Steel | 0000000 | 00000 | 000000 | 00 |
| 2 1/8" | 2 | 4 3/4" | Steel | 0000000 | 000000 | 000000 | 00 |
Hand-Held Tube Flarers for Single and Double 45° Flares
Create single or double flares in soft metal tubing so it’s compatible with flared tube fittings. Double flares roll the end of tubing in on itself then flare both layers for applications such as brake lines. A 45° flare is preferred for low-pressure applications. This tool consists of a flaring head and a tube holder.
| For Tube OD | For Tube OD for Double Flare | Lg. | Each | |
For Aluminum, Brass, Copper | ||||
|---|---|---|---|---|
| 3/16", 1/4", 5/16", 3/8", 1/2" | 3/16", 1/4", 5/16", 3/8", 1/2" | 7 1/2" | 0000000 | 000000 |
Vise-Mount Tube Flarers for 37° and 45° Flares
Mount these flarers in a vise and create single and double 37° and 45° flares. Use 37° flares in high-pressure applications and 45° flares in low-pressure applications. Double flares roll the end of tubing in on itself then flare both layers for applications such as brake lines. Type M hard copper should be annealed before flaring.
| For Tube OD | For Tube OD for Double Flare | Lg. | Material | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | |||||
|---|---|---|---|---|---|
| 4.75mm, 3/16", 1/4", 5/16", 3/8" | 4.75mm, 3/16", 1/4", 5/16", 3/8" | 11" | Steel | 00000000 | 0000000 |
Tube Expanders for Impact Wrenches
Use the power of an impact wrench to stretch the ends of metal tubing, allowing another tube with the same diameter to fit inside. This makes it easier to weld the two tubes together and prevents leaks. These expanders come with seven different heads, which are sized to fit tubes from 2" to 4 1/4" OD. Slide one of the heads inside the tubing and turn the hex nut on the end with a 1 1/8" socket to expand it. Compatible with both 1/2" and 3/4" impact wrenches.
| For Tube OD | For Max. Wall Thick. | For Square Drive Size | Includes | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | |||||
|---|---|---|---|---|---|
| 2", 2 3/8", 2 3/4", 3 1/8", 3 1/2", 3 7/8", 4 1/4" | 3/16" | 1/2", 3/4" | Five Aluminum Expander Heads (For 2 3/4", 3 1/8", 3 1/2", 3 7/8" and 4 1/4" Tube ODs) One Black-Oxide Steel Expander Head (For 2 3/8" Tube OD) One Black-Oxide Steel Tool with 1 1/8" External Hex Drive and Expander Head (For 2" Tube OD) | 0000000 | 0000000 |
Hammer-Driven Tube Expanders
Using a hammer, tap these expanders into the end of a tube to allow a second piece of the same diameter to fit inside. Known as swaging, this enables you to join tubing with a single solder joint, reducing the opportunities for leaks. Twist the hex end with a wrench to remove expanders from tubing.
When expanding tubes smaller than 5/8" OD, use a tube holder (sold separately) for additional stability.
Tube Expanders
Enlarge the end of a tube to allow a second piece of the same diameter to fit inside.
Tube Expanders for Condensers, Heat Exchangers, and Boilers
Designed for building and maintaining equipment with tubes that pass through perforated metal sheets, these expanders have rollers and tapered noses to ensure uniform tube tightness. They have a 3/8" square drive recommended for use with torque-controlled power tools.
For Tube Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Gauge | For Min. Tube ID | Max. Tube Expansion Dia. | For Max. Tube Sheet Thick. | Lg. | Body Material | Head Material | Each | |
For Aluminum, Brass, Copper, Steel | |||||||||
| 1/2" | 18 | 0.392" | 0.447" | 1 1/2" | 7 3/8" | Steel | Steel | 0000000 | 0000000 |
| 5/8" | 16 | 0.485" | 0.55" | 1 1/2" | 8 1/2" | Steel | Steel | 0000000 | 000000 |
| 5/8" | 18 | 0.517" | 0.582" | 1 1/2" | 8 1/2" | Steel | Steel | 0000000 | 000000 |
| 3/4" | 15 | 0.596" | 0.661" | 1 1/2" | 8 1/2" | Steel | Steel | 0000000 | 000000 |
| 3/4" | 17-18 | 0.619" | 0.699" | 1 1/2" | 9" | Steel | Steel | 0000000 | 000000 |
| 7/8" | 14 | 0.685" | 0.774" | 2 1/4" | 9 3/8" | Steel | Steel | 0000000 | 000000 |
| 1" | 14 | 0.81" | 0.909" | 2 1/4" | 9 3/4" | Steel | Steel | 0000000 | 000000 |
Tube Flarers and Expanders for 45° Flares
Create flares in soft metal tubing so it’s compatible with flared tube fittings. A 45° flare is preferred for low-pressure applications. This tool consists of a flaring head and a tube holder.
| For Tube OD | For Tube OD for Expanding | Lg. | Each | |
For Aluminum, Brass, Copper | ||||
|---|---|---|---|---|
| 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" | 6 3/4" | 000000 | 0000000 |
Tube Beaders
Form a rounded bead on the end of metal tubing to hold soft rubber hose in place. Slip hose over the beaded end and secure with a clamp.
Hammer-Driven Tube End Reshapers
Restore tube ends with a few light blows of a hammer. Place the reshapers inside the tube to round out crushed ends or outside to straighten flared ends.
| For Tube OD | For Max. Wall Thick. | Lg. | Material | Each | |
For Aluminum, Stainless Steel, Steel | |||||
|---|---|---|---|---|---|
| 1 1/2"-3 5/8" | 0.078" | 8" | Steel | 0000000 | 000000 |