How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Aluminum Quick-Connect Pipe for Compressed Air
- For Use With: Air, Coolant, Nitrogen, Oil
- Maximum Pressure: 230 psi @ 72° F
- Specifications Met: ASTM B241
- Fittings: Use Quick-Disconnect Aluminum
Build a compressed air system in half the time it would take to build a copper or steel system. Also known as Unipipe, this pipe is part of a quick-connect system. The compatible fittings connect to this pipe when you finger tighten their collar and then use a wrench for the final quarter turn. A compression ring and O-ring inside the fitting seal it onto this pipe.
Choose blue or gray pipe for easy identification. Blue pipe is often used for compressed air systems. Gray pipe is often used for vacuum systems.
Use a deburring scraper (sold separately) to smooth rough edges left behind after trimming the pipe to size.
For technical drawings and 3-D models, click on a part number.
Place the tool over the end of your tube and twist to deburr.
| For Tube OD | Blade Material | Overall Lg. | Body Material | For Use On | Each | |
For Deburring Outer Tube Edges and Inner Tube Edges | ||||||
|---|---|---|---|---|---|---|
| 3/16"-1 1/2" | Steel | 2 1/4" | Zinc | Aluminum, Copper, Brass, Plastic | 0000000 | 000000 |
Clear-View Thick-Wall Plastic Pipe for Water
See what’s flowing through your line with this clear pipe. Since it’s Schedule 80, this pipe has thicker, stronger walls than standard-wall pipe, so you can use it for heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. It’s made of PVC, which has good corrosion resistance. This pipe meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D1785, NSF/ANSI 61
- Fittings: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Connect unthreaded pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld). Unthreaded pipe meets NSF/ANSI 61 for use with drinking water systems.
8ft. | ||||||
|---|---|---|---|---|---|---|
Pipe Size | OD | ID | Wall Thick. | Max. Pressure | Each | |
| 1/4 | 35/64" | 0.282" | 0.119" | 570 psi @ 72° F | 0000000 | 000000 |
| 3/8 | 43/64" | 0.403" | 0.126" | 460 psi @ 72° F | 0000000 | 00000 |
| 1/2 | 27/32" | 0.526" | 0.147" | 420 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 3/64" | 0.722" | 0.154" | 340 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 0.936" | 0.179" | 320 psi @ 72° F | 0000000 | 00000 |
| 1 1/4 | 1 21/32" | 1.255" | 0.191" | 260 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.476" | 0.2" | 240 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 3/8" | 1.913" | 0.218" | 200 psi @ 72° F | 0000000 | 000000 |
| 2 1/2 | 2 7/8" | 2.29" | 0.276" | 210 psi @ 72° F | 0000000 | 000000 |
| 3 | 3 1/2" | 2.864" | 0.3" | 190 psi @ 72° F | 0000000 | 000000 |
| 4 | 4 1/2" | 3.786" | 0.337" | 160 psi @ 72° F | 0000000 | 000000 |
| 6 | 6 5/8" | 5.709" | 0.432" | 140 psi @ 72° F | 0000000 | 000000 |
| Pipe Cement (8 fl. oz. Can) | 000000000 | Each | 00000 |
Standard-Wall Plastic Pipe for Water
Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications. It’s made of PVC, which has good corrosion resistance. Pipe meets NSF/ANSI Standard 61 for drinking water. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality. Connect this pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D1785, NSF/ANSI 61
- Fittings: Use PVC Plastic
8 ft. | |||||||
|---|---|---|---|---|---|---|---|
| DIN Size, mm | OD, mm | ID, mm | Wall Thick., mm | Color | Max. Pressure | Each | |
| 12 | 12 | 9.8 | 1.1 | Dark Gray | 230 psi @ 72° F | 0000000 | 000000 |
| 16 | 16 | 13.6 | 1.2 | Dark Gray | 230 psi @ 72° F | 0000000 | 00000 |
| 20 | 20 | 17 | 1.5 | Dark Gray | 230 psi @ 72° F | 0000000 | 00000 |
| 25 | 25 | 21.2 | 1.9 | Dark Gray | 230 psi @ 72° F | 0000000 | 00000 |
| 32 | 32 | 27.2 | 2.4 | Dark Gray | 230 psi @ 72° F | 0000000 | 00000 |
| 50 | 50 | 42.6 | 3.7 | Dark Gray | 230 psi @ 72° F | 0000000 | 000000 |
Clear-View Standard-Wall Plastic Pipe for Water
See inside your line with this clear pipe, which works in a variety of residential and commercial low-pressure plumbing and water supply applications. It connects to standard-wall plastic pipe fittings. Made of PVC, it has good corrosion resistance. Join this pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, ASTM D1785, NSF/ANSI 61
- Fittings: Use Schedule 40 PVC Plastic
- Flanges: Use Schedule 40 PVC Plastic
Rigid pipe meets NSF/ANSI 61 for use with drinking water systems. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality.
8 ft. | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | Schedule | OD | ID | Wall Thick. | Max. Pressure | Each | |
| 1/4 | 40 | 35/64" | 0.364" | 0.088" | 390 psi @ 72° F | 00000000 | 000000 |
| 3/8 | 40 | 43/64" | 0.493" | 0.091" | 310 psi @ 72° F | 00000000 | 00000 |
| 1/2 | 40 | 27/32" | 0.622" | 0.109" | 300 psi @ 72° F | 00000000 | 00000 |
| 3/4 | 40 | 1 3/64" | 0.824" | 0.113" | 240 psi @ 72° F | 00000000 | 00000 |
| 1 | 40 | 1 5/16" | 1.049" | 0.133" | 220 psi @ 72° F | 00000000 | 00000 |
| 1 1/4 | 40 | 1 21/32" | 1.38" | 0.14" | 180 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 40 | 1 29/32" | 1.61" | 0.145" | 170 psi @ 72° F | 00000000 | 00000 |
| 2 | 40 | 2 3/8" | 2.067" | 0.154" | 140 psi @ 72° F | 00000000 | 00000 |
| 3 | 40 | 3 1/2" | 3.068" | 0.216" | 130 psi @ 72° F | 00000000 | 000000 |
| 4 | 40 | 4 1/2" | 4.026" | 0.237" | 110 psi @ 72° F | 00000000 | 000000 |
| 6 | 40 | 6 5/8" | 6.065" | 0.28" | 90 psi @ 72° F | 00000000 | 000000 |
| Pipe Cement for Max. Pipe Size 6 | 000000000 | Each | 00000 |
CPVC Pipe for Hot Water
Made of CPVC, this pipe can withstand high temperatures up to 170° or 200° F. It meets NSF/ANSI Standard 61 for drinking water. Also known as Schedule 80 pipe, it has thick, strong walls for use in heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. Pipe has good corrosion resistance. It is comparable to Corzan.
Connect unthreaded pipe to unthreaded female socket-connect fittings using a CPVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), Water
- Temperature Range: 32° F to 170° F
- Specifications Met: DIN 8079, ISO 15493, NSF/ANSI 61
- Fittings: Use CPVC plastic
- Flanges: Use Class 150 CPVC plastic
UV-Resistant Thick-Wall PVC Pipe for Water
- For Use With: Water
- Temperature Range: -10° to 140° F
- Specifications Met: ASTM D1784, FDA Compliant 21 CFR 175.300
- Fittings: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Use this pipe in outdoor environments–it’s made with an additive that protects against the damaging effects of ultraviolet light. Also known as Schedule 80 pipe, it has thicker, stronger walls than standard-wall pipe so it can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe is PVC, which has good corrosion resistance. Connect to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld). Pipe meets ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
8ft. | |||||||
|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Color | Max. Pressure | Each | |
| 1/4 | 35/64" | 0.302" | 0.119" | Black | 570 psi @ 72° F | 0000000 | 000000 |
| 3/8 | 43/64" | 0.423" | 0.126" | Black | 460 psi @ 72° F | 0000000 | 00000 |
| 1/2 | 27/32" | 0.546" | 0.147" | Black | 420 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | Black | 340 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | Black | 320 psi @ 72° F | 0000000 | 000000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | Black | 240 psi @ 72° F | 0000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | Black | 200 psi @ 72° F | 0000000 | 000000 |
| 3 | 3 1/2" | 2.9" | 0.3" | Black | 190 psi @ 72° F | 00000000 | 000000 |
| 4 | 4 1/2" | 3.826" | 0.337" | Black | 160 psi @ 72° F | 00000000 | 000000 |
| Pipe Cement (8 fl. oz. Can) | 000000000 | Each | 00000 |
UV-Resistant Polypropylene Pipe for Chemicals
This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand a wide variety of acids, solvents, and other harsh substances. Pipe has thick, strong walls for heavy duty chemical processing applications. It meets ASTM D4101 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
- For Use With: Solvents
- Temperature Range: 32° to 212° F
- Specifications Met: ASTM D4101
- Fittings:: Use Polypropylene Plastic
Use heat welding to connect unthreaded pipe to unthreaded female socket-connect fittings.
8 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| DIN Size, mm | OD, mm | ID, mm | Wall Thick., mm | Material | Color | Max. Pressure | Each | |
| 20 | 20 | 16.2 | 1.9 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
| 25 | 25 | 20.4 | 2.3 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 32 | 32 | 26.2 | 2.9 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 50 | 50 | 40.8 | 4.6 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
| 63 | 63 | 51.4 | 5.8 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 00000 |
High-Temperature PTFE Pipe Nipples and Pipe for Chemicals
- For Use With: Deionized Water, Hydrochloric Acid, Solvents
- Temperature Range: -450° to 550° F
- Specifications Met: ASTM D1710
- Fittings: Use Schedule 80 PTFE Plastic
- Flanges: Use Class 150 PTFE Plastic
This PTFE pipe can withstand a wider temperature range than any of our other plastic pipe for chemicals. It has the chemical resistance to stand up to acid and solvents. Also known as Schedule 80 pipe, it has thick walls for heavy duty industrial applications. The material won’t leach contaminates into the line, so this pipe is commonly used in high-purity processes, such as semiconductor and clean room applications. It has a super-smooth interior for unrestricted flow. Pipe meets ASTM D1710 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
Cut threads in both ends of these pipes to create nipples that thread into PTFE fittings. To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
8 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
| 1/8 | 13/32" | 0.215" | 0.095" | PTFE Plastic | White | 110 psi @ 72° F | 000000000 | 0000000 |
| 1/4 | 35/64" | 0.302" | 0.119" | PTFE Plastic | White | 90 psi @ 72° F | 000000000 | 000000 |
| 3/8 | 43/64" | 0.423" | 0.126" | PTFE Plastic | White | 60 psi @ 72° F | 000000000 | 000000 |
| 1/2 | 27/32" | 0.546" | 0.147" | PTFE Plastic | White | 60 psi @ 72° F | 000000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PTFE Plastic | White | 50 psi @ 72° F | 000000000 | 000000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PTFE Plastic | White | 35 psi @ 72° F | 000000000 | 000000 |
High-Purity Polypropylene Pipe for Corrosive Chemicals
The inside of this pipe won’t leach contaminants into your line or accumulate particles—it’s polished to an ultra-smooth 12 Ra finish, which also makes them easy to clean. Made of polypropylene, it resists organic solvents, acids, and alkalis better than CPVC pipe. It meets NSF/ANSI 61 for use with drinking water, and it’s FDA compliant for direct contact with food. It also meets ASTM requirements for material and performance, and ISO requirements for dimensions. Also known as SDR 11 pipe.
Connect this pipe to fittings with socket fusion welding for a strong, permanent bond. Use a socket fusion tool with a heater bushing (sold separately) that matches your pipe size.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Deionized Water, Drinking Water, Hydrochloric Acid, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: 32° to 200° F
- Specifications Met: ASTM D2837, ASTM D4101, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, ISO 7279, NSF/ANSI 61
- Fittings: Use SDR 11 Polypropylene Plastic
- Flanges: Use SDR 11 Polypropylene Plastic
8 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
| 1/2 | 25/32" | 0.638" | 0.075" | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 000000 |
| 3/4 | 63/64" | 0.803" | 0.091" | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 17/64" | 1.031" | 0.114" | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 31/32" | 1.606" | 0.181" | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 31/64" | 2.024" | 0.228" | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 0000000 | 00000 |
| Includes | Each | |
| 5 Bushing Sets (1 each in 1/2, 3/4, 1, 1 1/2, and 2 Pipe Sizes) | 00000000 | 0000000 |
High-Purity PVDF Pipe for Corrosive Chemicals
Made of PVDF that’s finished to a 12 Ra smoothness, this pipe handles some of the harshest chemicals without leaching contaminants into your line. It won’t accumulate particles and is easy to clean, thanks to its smoothness. Comparable to Kynar, this pipe handles most organic solvents that would dissolve CPVC, and chlorine or nitric acid that would weaken polypropylene. You can use it at higher temperatures than CPVC and polypropylene. This pipe meets UL 94 V-0 and Factory Mutual standards for flame retardance. It’s also FDA compliant for direct contact with food, and it meets ASTM requirements for dimensions and tolerances. Also known as SDR 21 pipe.
Connect this pipe to fittings with socket fusion welding for a strong, permanent bond. Use a socket fusion tool with a heater bushing (sold separately) that matches your pipe size.
For technical drawings and 3-D models, click on a part number.
- For Use With: Chlorine, Deionized Water, Hydrochloric Acid, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: -40° to 270° F
- Specifications Met: ASTM D3222, FDA Compliant 21 CFR 177.2510, FM 4910, UL 94 V-0
- Fittings: Use SDR 21 PVDF Plastic
8 ft. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | For Fitting Standard Dimensional Ratio | Each | |
| 1/2 | 25/32" | 0.638" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 0000000 |
| 3/4 | 63/64" | 0.835" | 0.075" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 | 1 17/64" | 1.071" | 0.094" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 1 1/2 | 1 31/32" | 1.732" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 000000 |
| 2 | 2 31/64" | 2.244" | 0.118" | PVDF Plastic | White | 230 psi @ 72° F | SDR 21 | 0000000 | 00000000 |
| Includes | Each | |
| 5 Bushing Sets (1 each in 1/2, 3/4, 1, 1 1/2, and 2 Pipe Sizes) | 00000000 | 0000000 |
Gravity-Flow CPVC Pipe for Corrosive Chemical Waste
- For Use With: Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid
- Temperature Range: 40° to 200° F
- Specifications Met: ASTM F2618, IAPMO Listed, NSF/ANSI 14, UL 94 V-0
Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it meets NSF/ANSI 14 requirements for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances. Connect to unthreaded female socket-connect fittings using a CPVC primer and cement (also known as solvent weld). Pipe is comparable to Corzan. It meets UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. It is IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.