These gaskets have a carbon steel outer ring and a 304 stainless steel inside sealing element with a PTFE filler that’s virtually chemically inert. They're also known as spiral-wound gaskets.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

These compressible Buna-N rubber gaskets ensure a tight seal. They also resist water and salts.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

Also resistant to salt water.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Made of FDA-listed material for use with food and beverage.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.