These flanges are for low-pressure applications in noncorrosive environments.

Use these fittings for low-pressure applications in noncorrosive environments.

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Even in temperatures as low as -46°, these A350 LF2 steel flanges won’t become brittle, so they absorb impact better than other low-pressure steel flanges.

FM-approved for fire protection applications, these flanges are cast iron, so they're brittle and can be quickly opened by hitting them with a sledge hammer.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Use these heavy duty forged flanges for high-pressure applications.

Create an access point in systems where corrosion is a concern. Made of stainless steel, these bleed rings resist rusting.

Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Flanges are aluminum, which is lightweight with good corrosion resistance.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications.

To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

With an FEP sleeve and PTFE sealing tape, these connectors withstand chemicals better than rubber connectors. Use them for joining low-pressure chemical waste drainpipe and fittings or transitioning between different chemical piping.

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

These all-metal expansion joints can handle high temperatures up to 800° F.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

Connect different pipe sizes in your line while adding a point of flexibility between them. These expansion joints absorb movement between two connected pipes to reduce stress, vibration, and noise.

Made of EPDM rubber, these gaskets also resist salt water.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

Also known as Gore GR.

Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Our highest temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

These neoprene gaskets also resist salts.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

These pure PTFE gaskets have a slippery surface that prevents sticking.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.