To prevent leaks in low-pressure lines, the male threads on these fittings have an acrylic sealant already applied for extra protection.

Suitable for use in fire-protection applications, these pipe fittings are made of cast iron, so they are brittle and can be quickly opened with the strike of a sledge hammer.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Even in temperatures as low as -46°, these A350 LF2 steel flanges won’t become brittle, so they absorb impact better than other low-pressure steel flanges.

FM-approved for fire protection applications, these flanges are cast iron, so they're brittle and can be quickly opened by hitting them with a sledge hammer.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

For excellent strength in extreme-pressure applications, choose these heavy duty Pressure Class 1500 flanges.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Connect these fittings to UV-resistant PVC pipe. Designed for outdoor use, they contain an additive that protects against the damaging effects of ultraviolet light. Fittings are typically used in low-pressure residential and commercial plumbing and water supply applications up to 300 psi.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal.

Connect two pipes that are up to 100 feet apart—cut the connector to the length you need and attach a clamp to each end.

With an FEP sleeve and PTFE sealing tape, these connectors withstand chemicals better than rubber connectors. Use them for joining low-pressure chemical waste drainpipe and fittings or transitioning between different chemical piping.

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

Use in high-pressure applications up to 500 psi.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

These expansion joints have a double-bulb design for extra movement and vibration absorption.

The EPDM lining in these joints meets NSF/ANSI 61 standard for use with drinking water.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Also known as Gore GR.

Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Our highest-temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Also resistant to salt water.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.