Suitable for use in fire-protection applications, these pipe fittings are made of cast iron, so they are brittle and can be quickly opened with the strike of a sledge hammer.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

FM approved, these fittings are suitable for use in fire-protection systems. All have flat-surface flanged ends that only mate to another same-size flat-surface flange, pump, or valve with a gasket to create an access point in a pipeline.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Attach a gauge to the side port on these valves to monitor pressure, temperature, and other measurements in your line. Use with water and air.

With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.

Install these low-profile valves in low-clearance pipelines for natural gas, propane, and butane.

FM-approved for fire suppression and protection, these valves can isolate sections of the water supply in your facility.

Designed to withstand the high temperatures and pressures in steam service applications.

These valves are rated for use in hazardous locations with flammable gas and combustible dust.

Install these valves in gas pipelines to automatically control the flow of natural gas, propane, and butane to equipment.

Avoid pressure surges and system shocks that can damage piping by installing these valves that open and close slowly.

Lower profile and available in smaller connection sizes than standard valves, these fit in tight spots.

Comparable to Asco Red Hat 8210G Series and Parker Gold Ring 23C Series, these valves meet the highest quality standards.

These solenoid valves operate on electricity to automatically start and stop flow. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

To fit in tight spots, these valves have a slimmer body than standard valves with an exhaust port.