Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Use these fittings with power washer guns and in other high-pressure water supply applications.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.

Fittings have sharp barbs that grip push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use in low-pressure hydraulic applications up to 350 psi.

Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.

Built with ball bearings, these fittings continuously swivel 360° before and after installation to prevent your hose from twisting, kinking, and failing. They’re made of 316 stainless steel, so they won’t corrode from a wide variety of chemicals, as well as fuels, gasoline, and oil.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Designed for coolant applications up to 200 psi, these fittings have a standard barbed end that slides into hose and secures with a clamp.

The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.

Made of brass, these fittings have good corrosion resistance.

Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

A tube adapter sits flush against the flat face of the fitting so you can slide the steel tubing and fitting sideways to disconnect in cramped spaces. Also known as zero-clearance fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

Polished to at least a 15 Ra finish on the inside, these fittings have an ultra-smooth interior surface that helps prevent contamination. They are also known as ultra-high-purity fittings.

Extreme pressures are no problem for these heavy-duty brass fittings.

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Joints are for two-way flow and are meant to be used when you need the supply line and the return line to be on the same side of your equipment.

Supply air to two different rotating objects from a stationary supply.

Joints are aluminum, which is lighter than other metals.

Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Move grease-dispensing guns in any direction without kinking the outlet hose.

More powerful than Air-Powered Chiseling Hammers, these tools are often used for heavy material removal in foundry and fabrication shops.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

These durable wash guns are typically used for frequent washdowns and cleanup.