How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Iron and Steel Threaded Pipe Fittings
Use these fittings for low-pressure applications in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Steam, Oil, Water, Natural Gas
- Pressure Class: 150
- Specifications Met: ASME B1.20.1, ASME B16.3, UL Listed
- Pipe Nipples and Pipe: Use Schedule 40 steel
Pipe Size | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT Female | |||||
|---|---|---|---|---|---|
| 1/2 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 00000 |
| 3/4 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 0000 |
| 1 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 00000 |
| 1 1/4 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 00000 |
| 1 1/2 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 00000 |
| 2 | 300 psi @ 72° F | 150 psi @ 350° F | Iron | 000000000 | 00000 |
Standard-Wall Plastic Pipe Fittings for Water
Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
Fittings for drinking water meet NSF/ANSI Standard 61.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. Fittings that meet ASTM D1784, ASTM D1785, and ASTM D4066 adhere to specifications and testing requirements for material quality.
Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Press-Connect Fittings for Copper Tubing
- For Use With: Drinking Water
- Maximum Pressure: 200psi @ 72° F
- Temperature Range: 0° to 250° F
- Tubing: Use with K, M, L copper
- Specifications Met: See table
Crimp these fittings to copper tubing with a crimping tool (sold separately). An O-ring on the inside of the fitting creates a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings. Fittings have good corrosion resistance. They meet NSF/ANSI safety standards for use with drinking water systems.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Copper Tube Size | For Tube OD | Pipe Size | Material | Dia. | No. of | Specifications Met | Each | |
NPT Threads | ||||||||
| 1/2 | 5/8" | 1/2 | Bronze | 1/4" | 2 | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 000000 |
| 3/4 | 7/8" | 3/4 | Bronze | 1/4" | 2 | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 00000 |
| 1 | 1 1/8" | 1/2 | Bronze | 1/4" | 2 | ASME B16.51, ASME B31.1, ASME B31.3, ASME B31.9, NSF/ANSI 61, UL 213 | 00000000 | 00000 |
