To prevent leaks in low-pressure lines, the male threads on these fittings have an acrylic sealant already applied for extra protection.

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use these corrosion-resistant fittings in a low-pressure pipe line.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

Extreme pressures are no problem for these heavy-duty brass fittings.

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Thick walls give these Schedule 80 fittings excellent strength.

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.

Watch water flow through your line. These fittings are compatible with Schedule 40 pipe, the industry standard for residential and commercial low-pressure plumbing and water supply.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications.

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Made of PVDF that’s finished to a 12 Ra smoothness, these fittings handle some of the harshest chemicals without leaching contaminants into your line. Comparable to Kynar, they handle most organic solvents that would dissolve CPVC, and chlorine or nitric acid that would weaken polypropylene.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies.

Bolt two same-size flanges together with a gasket to create an access point within a line. Also known as Schedule 40 flanges, they are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

When cleanliness is crucial to your application, choose these fittings that are individually cleaned and bagged to prevent contamination.

The sleeve in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards.

Designed for use in welding applications, these fittings are flame retardant.

Fittings can withstand temperatures up to 200° F.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Crimp these fittings onto hydraulic hose for a permanent, leak-tight connection. Since they crimp on, they handle higher pressure than screw-on fittings.

Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.

Made of PVC plastic to withstand acids, alkalies, salts, and other corrosive vapors and fumes.

Often used in tight spaces, such as in walls and ceilings, rectangular duct allows you to select larger sizes without increasing duct height.