Made-to-Order Pins
Choose a material, head type, end type, and size to create a custom pin.
Steel pins have good strength.
Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Plain × Retaining Ring Groove
Plain × Retaining Ring Groove
Retaining Ring Groove
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
Plain × Through Hole
Plain × Through Hole
Through Hole
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.25" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
Plain × Tapped
Plain × Tapped
Tapped
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 1/2" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | 1/2" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | 1/2" | 00000000 | 00000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | 1/2" | 00000000 | 00000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
Plain × Threaded
Plain × Threaded
Threaded
Length refers to the unthreaded portion of the pin.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 10-32 | 1/4" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | 1/4"-20 | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | 5/16"-18 | 1/2" | 00000000 | 00000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | 3/8"-16 | 5/8" | 00000000 | 00000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | 1/2"-13 | 3/4" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | 5/8"-11 | 7/8" | 00000000 | 000000 | 00000 | 00000 | |
Plain × Set Screw Flat
Plain × Set Screw Flat
Set Screw Flat
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
Retaining Ring Groove × Retaining Ring Groove
Retaining Ring Groove × Retaining Ring Groove
Retaining Ring Groove
First Pin End | Second Pin End | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |
Retaining Ring Groove × Through Hole
Retaining Ring Groove × Through Hole
Retaining Ring Groove
Through Hole
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | ||
Retaining Ring Groove × Tapped
Retaining Ring Groove × Tapped
Retaining Ring Groove
Tapped
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Choose a Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 1/2" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
Retaining Ring Groove × Threaded
Retaining Ring Groove × Threaded
Retaining Ring Groove
Threaded
Length refers to the unthreaded portion of the pin.
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 10-32 | 1/4" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 1/4"-20 | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 5/16"-18 | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 3/8"-16 | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 1/2"-13 | 3/4" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 5/8"-11 | 7/8" | 00000000 | 000000 | 00000 | 00000 | |
Retaining Ring Groove × Set Screw Flat
Retaining Ring Groove × Set Screw Flat
Retaining Ring Groove
Set Screw Flat
Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
Through Hole × Through Hole
Through Hole × Through Hole
Through Hole
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose First End Through Hole Dia., in. | Choose First End Distance from Center of Hole to Pin End | Choose Second End Through Hole Dia., in. | Choose Second End Distance from Center of Hole to Pin End | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 000000 | 000000 | |||
| 5/16" | 1/4"-4" | Min. of 0.25" | Min. of 0.25" | 00000000 | 00000 | 00000 | 00000 | |||
| 3/8" | 1/4"-5" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |||
| 1/2" | 1/4"-5" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |||
| 5/8" | 1/4"-5" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |||
| 3/4" | 1/4"-5" | Min. of 0.25" | Min. of 0.25" | 00000000 | 000000 | 00000 | 00000 | |||
Through Hole × Tapped
Through Hole × Tapped
Tapped
Through Hole
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | Choose a Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 000000 | 000000 | |||
| 5/16" | 1/4"-4" | Min. of 0.25" | 1/2" | 00000000 | 00000 | 00000 | 00000 | |||
| 3/8" | 1/4"-5" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 1/2" | 1/4"-5" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 5/8" | 1/4"-5" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 3/4" | 1/4"-5" | Min. of 0.25" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
Through Hole × Threaded
Through Hole × Threaded
Threaded
Through Hole
Length refers to the unthreaded portion of the pin.
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.25" | 10-32 | 1/4" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | Min. of 0.25" | 1/4"-20 | 7/16" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | Min. of 0.25" | 5/16"-18 | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | Min. of 0.25" | 3/8"-16 | 5/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | Min. of 0.25" | 1/2"-13 | 3/4" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | Min. of 0.25" | 5/8"-11 | 7/8" | 00000000 | 000000 | 00000 | 00000 | ||
Through Hole × Set Screw Flat
Through Hole × Set Screw Flat
Set Screw Flat
Through Hole
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | Min. of 0.25" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
Tapped × Tapped
Tapped × Tapped
Tapped
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Thread Size for First Pin End | Choose a Thread Size for Second Pin End | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 1/2" | 00000000 | 000000 | 000000 | 000000 | |||
| 5/16" | 1/4"-4" | 1/2" | 00000000 | 00000 | 00000 | 00000 | |||
| 3/8" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 1/2" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 5/8" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
| 3/4" | 1/4"-5" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |||
Tapped × Threaded
Tapped × Threaded
Tapped
Threaded
Length refers to the unthreaded portion of the pin.
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Tapped End Thread Size | Tapped End Thread Lg. | Threaded End Thread Size | Threaded End Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 1/2" | 10-32 | 1/4" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | 1/2" | 1/4"-20 | 7/16" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | 1/2" | 5/16"-18 | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | 1/2" | 3/8"-16 | 5/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | 1/2" | 1/2"-13 | 3/4" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | 1/2" | 5/8"-11 | 7/8" | 00000000 | 000000 | 00000 | 00000 | ||
Tapped × Set Screw Flat
Tapped × Set Screw Flat
Set Screw Flat
Tapped
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Thread Size | Thread Lg. | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 1/4"-4" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 1/4"-5" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 1/4"-5" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 1/4"-5" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 1/4"-5" | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | ||
Threaded × Threaded
Threaded × Threaded
Threaded
Length refers to the unthreaded portion of the pin.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Thread Size | Thread Lg. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 10-32 | 1/4" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | 1/4"-20 | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | 5/16"-18 | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | 3/8"-16 | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | 1/2"-13 | 3/4" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | 5/8"-11 | 7/8" | 00000000 | 000000 | 00000 | 00000 | |
Threaded × Set Screw Flat
Threaded × Set Screw Flat
Set Screw Flat
Threaded
Length refers to the unthreaded portion of the pin.
Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Thread Size | Thread Lg. | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 10-32 | 1/4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | 1/4"-20 | 7/16" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | 5/16"-18 | 1/2" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | 3/8"-16 | 5/8" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | 1/2"-13 | 3/4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | 5/8"-11 | 7/8" | 0.062" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
Set Screw Flat × Set Screw Flat
Set Screw Flat × Set Screw Flat
Set Screw Flat
First Pin End | Second Pin End | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 1/4"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 1/4"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 1/4"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | Min. of 0.25" | Min. of 1/8" | 00000000 | 000000 | 00000 | 00000 | |
Flat-Head Made-to-Order Pins
Create a custom headed pin with your choice of material, dimensions, and end type.
Steel pins have good strength.
Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Plain
Plain
Head | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 5/16"-4" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 5/16"-5" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 5/16"-5" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 5/16"-5" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 5/16"-5" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | |
Flat Head
Flat Head
Head | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 5/16"-4" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 5/16"-5" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 5/16"-5" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 5/16"-5" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 5/16"-5" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | |
Retaining Ring Groove
Retaining Ring Groove
Retaining Ring Groove
Head | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Groove Wd. | Choose a Groove Dia. | Choose a Distance from Groove Edge to Pin End | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | Min. of 0.03" | 0.19"-0.249" | Min. of 0.25" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 5/16"-4" | Min. of 0.03" | 0.252"-0.311" | Min. of 0.25" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 5/16"-5" | Min. of 0.03" | 0.315"-0.374" | Min. of 0.25" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 5/16"-5" | Min. of 0.03" | 0.44"-0.499" | Min. of 0.25" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 5/16"-5" | Min. of 0.03" | 0.565"-0.624" | Min. of 0.25" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 5/16"-5" | Min. of 0.03" | 0.69"-0.749" | Min. of 0.25" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | |
Through Hole
Through Hole
Through Hole
Head | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Through Hole Dia., in. | Choose a Distance from Center of Hole to Pin End | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | Min. of 0.25" | 3/32" | 3/8" | 00000000 | 00 | 00 | 00 | ||
| 5/16" | 5/16"-4" | Min. of 0.25" | 7/64" | 7/16" | 00000000 | 000000 | 000000 | 000000 | ||
| 3/8" | 5/16"-5" | Min. of 0.25" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 5/16"-5" | Min. of 0.25" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 5/16"-5" | Min. of 0.25" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 5/16"-5" | Min. of 0.25" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | ||
Tapped
Tapped
Tapped
Head | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Choose a Thread Size | Thread Lg. | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | 1/2" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | ||
| 5/16" | 5/16"-4" | 1/2" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | ||
| 3/8" | 5/16"-5" | 1/2" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | ||
| 1/2" | 5/16"-5" | 1/2" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | ||
| 5/8" | 5/16"-5" | 1/2" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | ||
| 3/4" | 5/16"-5" | 1/2" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | ||
Threaded
Threaded
Threaded
Head | Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Thread Size | Thread Lg. | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | 10-32 | 1/4" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 5/16"-4" | 1/4"-20 | 7/16" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 5/16"-5" | 5/16"-18 | 1/2" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 5/16"-5" | 3/8"-16 | 5/8" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 5/16"-5" | 1/2"-13 | 3/4" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 5/16"-5" | 5/8"-11 | 7/8" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | |
Set Screw Flat
Set Screw Flat
Set Screw Flat
Head | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Choose a Material | Choose a Lg. | Flat Dp. | Choose a Distance from Flat Edge to Pin End | Choose a Flat Wd. | Ht. | Dia. | 1-4 | 5-9 | 10-Up | |
| 1/4" | 5/16"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 3/32" | 3/8" | 00000000 | 000000 | 000000 | 000000 | |
| 5/16" | 5/16"-4" | 0.062" | Min. of 0.25" | Min. of 1/8" | 7/64" | 7/16" | 00000000 | 00000 | 00000 | 00000 | |
| 3/8" | 5/16"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 1/8" | 1/2" | 00000000 | 000000 | 00000 | 00000 | |
| 1/2" | 5/16"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 5/32" | 5/8" | 00000000 | 000000 | 00000 | 00000 | |
| 5/8" | 5/16"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 7/32" | 13/16" | 00000000 | 000000 | 00000 | 00000 | |
| 3/4" | 5/16"-5" | 0.062" | Min. of 0.25" | Min. of 1/8" | 1/4" | 15/16" | 00000000 | 000000 | 00000 | 00000 | |