Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Retract the nose by pulling the knob.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

Install by hand or with a hex key in low-clearance applications.

Thread onto machinery or attach a knob or handle to the threaded spindle.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.

Lock the nose into the retracted position by pulling and rotating the knob.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The mounting screws on these latches are concealed to prevent tampering.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

The mounting screws on these padlockable latches are concealed to prevent tampering.

These padlockable latches are reversible for right- and left-hand mounting.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

Choose these locks if you need several locks that open with the same key.