We will reply to your message within an hour.
These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.
Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.
Use connectors where ignitable gas and dust may be present, such as in refineries and silos. They also prevent an electrical arc when separating mated connectors so you can safetly connect and disconnect with the power on.
Meet international standards IEC 309-1 and 309-2.
When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.
Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.
Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.
Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.
Use these connectors in vehicles and other agricultural and construction equipment.
Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.
Protect connections while maintaining access. The base and hood latch together securely yet can be quickly detached for equipment repair or replacement.
Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.
A rubber seal and stainless steel hardware give these connectors excellent chemical resistance. They're rated NEMA 12, 4X, and IP65 for protection against corrosion, oil, and washdown environments.
Assemble a connector that can handle multiple applications at once. Combine inserts that send power, signal, and data with a base and a hood.
Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.
Configure a connector for your application—combine inserts for power and signal with a base and a hood.
The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.
Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.
These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.
These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.
Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.
Protect Mil. Spec. connectors when not in use.
A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.
These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.
Make secure connections with machine tools, robots, and other equipment that vibrates frequently and carries currents as high as 300 amps.
Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.
A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.
Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.
Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.
Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. Use them with standard Molex connectors.
Stack as many connectors on top of each other as needed—the housings clamp together to form a secure attachment.
Reduce the likelihood of slips and falls in high-traffic areas—connectors won't roll when stepped on.
Reduce the number of electrical connections in sanitary areas, such as food plants—these connectors combine Ethernet, a power cable, and wire for signals into a single connection point.
One hand is all you need—just push these connectors in to secure them and charge surveillance cameras, user interfaces, and other small devices.
Mount these receptacles to control cabinets and equipment in order to quickly connect and disconnect M29 power cords.
With a PVC housing, connectors withstand exposure to chemicals, oil, fuel, and salt water.
Push these connectors together to quickly create signal and data connections in tight spaces. They need less space to mate than screw-together connectors, which require two hands to twist them in place.
Send power from generators to keep the lights on and equipment running.
Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.
To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.
Use these cords in vehicles and other agricultural and construction equipment.
Connect multiple M8 and M12 cords to create a network between equipment. These blocks are often used to send signal and power to proximity switches and sensors.
Plug your microphone into an amplifier or speaker.
Add these connectors to thermocouple wire for easy attachment to thermometers and control panels.
Connect multiple thermocouple probes to an instrument panel.
Also known as feedthrough connectors, these mount through threaded tank openings to make connections between thermocouple probes and external equipment.
Convert round-pin thermocouple male connectors to flat-pin thermocouple male connectors.
Plug thermocouple probes into a control panel.
Extend the reach of your thermocouple probe—plug-in connectors on both ends of this wire speed up installation.
Attach plug-in connectors to RTD probes with wire leads.
Use these cords to connect PLC expansion modules and keep everything configured on one processor.
Adapt 10-pin cables for connection to a USB port on a PC.
Convert 10-pin cables to RS-232C for connection to PCs.
Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.