Piano Wire | McMaster-Carr

Filter by

Diameter

Length

Material

Container Type

Container Net Weight

Appearance

Tensile Strength

Specifications Met

Hardness Rating

Maximum Temperature

Hardness

DFARS Compliance

REACH Compliance

RoHS Compliance

Finish

Forward

How can we improve?

290 Products

About Stainless Steel

Determine if stainless steel is the right material for you and which types will work best.

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

View a wire gauge conversion chart.

Spring-Back Multipurpose 304 Stainless Steel Wire

This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Coils

Coil

Heat Treatment: Hardened
Tensile Strength: 205,000 psi
Specifications Met: ASTM A313, ASTM A555

				1/4 lbs. Coil			1 lbs. Coil
Dia.	Dia. Tolerance	Fabrication	Max. Temperature, °F	Lg., ft.		Each	Lg., ft.		Each
Matte
0.031"	-0.0005" to 0.0005"	Cold Drawn	570°	96	0000000	000000	385	0000000	000000
0.033"	-0.0008" to 0.0008"	Cold Drawn	570°	86	0000000	0000	340	0000000	00000
0.035"	-0.0008" to 0.0008"	Cold Drawn	570°	76	0000000	0000	305	0000000	00000
0.037"	-0.0008" to 0.0008"	Cold Drawn	570°	68	0000000	0000	270	0000000	00000
0.039"	-0.0008" to 0.0008"	Cold Drawn	570°	61	0000000	0000	245	0000000	00000
0.041"	-0.0008" to 0.0008"	Cold Drawn	570°	55	0000000	0000	220	0000000	00000
0.043"	-0.0008" to 0.0008"	Cold Drawn	570°	50	0000000	0000	200	0000000	00000
0.045"	-0.001" to 0.001"	Cold Drawn	570°	46	0000000	0000	185	0000000	00000
0.047"	-0.001" to 0.001"	Cold Drawn	570°	42	0000000	0000	170	0000000	00000
0.049"	-0.001" to 0.001"	Cold Drawn	570°	39	0000000	0000	155	0000000	00000
0.051"	-0.001" to 0.001"	Cold Drawn	570°	36	0000000	0000	140	0000000	00000
0.055"	-0.001" to 0.001"	Cold Drawn	570°	31	0000000	0000	120	0000000	00000
0.059"	-0.001" to 0.001"	Cold Drawn	570°	27	0000000	0000	105	0000000	00000
0.063"	-0.001" to 0.001"	Cold Drawn	570°	23	0000000	0000	94	0000000	00000
0.067"	-0.001" to 0.001"	Cold Drawn	570°	21	0000000	0000	83	0000000	00000
0.071"	-0.001" to 0.001"	Cold Drawn	570°	18	0000000	0000	74	0000000	00000
0.075"	-0.001" to 0.001"	Cold Drawn	570°	16	0000000	0000	66	0000000	00000
0.08"	-0.001" to 0.001"	Cold Drawn	570°	14	00000000	0000	58	0000000	00000
0.086"	-0.001" to 0.001"	Cold Drawn	570°	12	00000000	0000	50	0000000	00000
0.091"	-0.001" to 0.001"	Cold Drawn	570°	11	00000000	0000	45	0000000	00000
0.094"	-0.001" to 0.001"	Cold Drawn	570°	10	00000000	0000	42	0000000	00000
0.102"	-0.001" to 0.001"	Cold Drawn	570°	9	00000000	0000	36	0000000	00000
0.106"	-0.001" to 0.001"	Cold Drawn	570°	8	00000000	0000	33	0000000	00000
0.11"	-0.001" to 0.001"	Cold Drawn	570°	7	00000000	0000	31	0000000	00000
0.125"	-0.001" to 0.001"	Cold Drawn	570°	6	00000000	0000	24	0000000	00000
0.162"	-0.001" to 0.001"	Cold Drawn	570°	3	00000000	0000	14	00000000	00000
Mirror-Like
0.005"	-0.0002" to 0.0002"	Cold Drawn	570°	3,710	00000000	00000	14,840	00000000	00000
0.008"	-0.0003" to 0.0003"	Cold Drawn	570°	1,445	00000000	00000	5,795	00000000	00000
0.009"	-0.0003" to 0.0003"	Cold Drawn	570°	1,145	0000000	00000	4,595	0000000	00000
0.01"	-0.0003" to 0.0003"	Cold Drawn	570°	930	0000000	00000	3,720	0000000	00000
0.012"	-0.0004" to 0.0004"	Cold Drawn	570°	645	0000000	00000	2,585	0000000	00000
0.014"	-0.0004" to 0.0004"	Cold Drawn	570°	470	0000000	00000	1,895	0000000	00000
0.015"	-0.0004" to 0.0004"	Cold Drawn	570°	410	00000000	00000	1,655	00000000	00000
0.016"	-0.0004" to 0.0004"	Cold Drawn	570°	360	0000000	00000	1,450	0000000	00000
0.018"	-0.0004" to 0.0004"	Cold Drawn	570°	285	0000000	00000	1,145	0000000	00000
0.02"	-0.0004" to 0.0004"	Cold Drawn	570°	230	0000000	00000	930	0000000	00000
0.022"	-0.0004" to 0.0004"	Cold Drawn	570°	190	0000000	00000	765	0000000	00000
0.024"	-0.0005" to 0.0005"	Cold Drawn	570°	160	0000000	00000	645	0000000	00000
0.025"	-0.0005" to 0.0005"	Cold Drawn	570°	145	00000000	00000	595	00000000	00000
0.026"	-0.0005" to 0.0005"	Cold Drawn	570°	135	0000000	00000	550	0000000	00000
0.029"	-0.0005" to 0.0005"	Cold Drawn	570°	110	0000000	00000	440	0000000	00000
0.032"	-0.0005" to 0.0005"	Cold Drawn	570°	91	00000000	00000	360	00000000	00000
0.04"	-0.0008" to 0.0008"	Cold Drawn	570°	58	00000000	00000	230	00000000	00000
0.051"	-0.001" to 0.001"	Cold Drawn	570°	35	00000000	00000	140	00000000	00000

1-ft. Lengths

1-ft. Length

Heat Treatment: Hardened
Tensile Strength: 205,000 psi
Specifications Met: ASTM A313, ASTM A555

					1 ft. Lg.
Dia.	Dia. Tolerance	Fabrication	Max. Temperature, °F	Pkg. Qty.		Pkg.
Matte
0.031"	-0.001" to 0.001"	Cold Drawn	570°	50	0000000	00000
0.033"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.035"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.037"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.039"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.041"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.043"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.045"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.047"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.049"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.051"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.055"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.059"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.063"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.075"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.08"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
0.094"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	00000
Mirror-Like
0.01"	-0.0005" to 0.0005"	Cold Drawn	570°	100	0000000	00000
0.015"	-0.0005" to 0.0005"	Cold Drawn	570°	100	0000000	00000
0.02"	-0.0005" to 0.0005"	Cold Drawn	570°	100	0000000	00000
0.022"	-0.0005" to 0.0005"	Cold Drawn	570°	100	0000000	00000
0.024"	-0.0005" to 0.0005"	Cold Drawn	570°	100	0000000	00000
0.025"	-0.0005" to 0.0005"	Cold Drawn	570°	50	00000000	00000
0.026"	-0.0005" to 0.0005"	Cold Drawn	570°	50	0000000	00000
0.029"	-0.0005" to 0.0005"	Cold Drawn	570°	50	0000000	00000
0.051"	-0.001" to 0.001"	Cold Drawn	570°	25	00000000	00000

Spring-Back Corrosion-Resistant 316 Stainless Steel Wire

Heat Treatable: No
Tensile Strength: 222,000 psi
Specifications Met: ASTM A313

This wire will spring back after bending. It's often used to make springs and wire rope. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

			1/4 lbs. Coil			1 lbs. Coil
Dia.	Dia. Tolerance	Max. Temperature, °F	Lg., ft.		Each	Lg., ft.		Each
Mirror-Like
0.015"	-0.001" to 0.001"	570°	410	00000000	000000	1,655	00000000	000000
0.02"	-0.001" to 0.001"	570°	230	00000000	00000	930	00000000	00000
Matte
0.032"	-0.001" to 0.001"	570°	91	00000000	00000	360	00000000	00000
0.04"	-0.001" to 0.001"	570°	58	00000000	00000	230	00000000	00000
0.051"	-0.001" to 0.001"	570°	35	00000000	00000	140	00000000	00000
0.064"	-0.001" to 0.001"	570°	22	00000000	00000	91	00000000	00000
0.08"	-0.001" to 0.001"	570°	__	000000	00	58	00000000	00000
0.102"	-0.001" to 0.001"	570°	__	000000	00	36	00000000	00000
1/8"	-0.001" to 0.001"	570°	__	000000	00	23	00000000	00000

Lubricated 1080 Spring Steel Wire

Heat Treatment: Hardened
Tensile Strength: 261,000 psi
Specifications Met: ASTM A228

Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.

For technical drawings and 3-D models, click on a part number.

1/4 lbs. Coil
Dia.	Dia. Tolerance	Heat Treatment	Temperature Range	Lg., ft.		Each
0.006"	-0.0005" to 0.0005"	Hardened	Not Rated	2,585	00000000	000000
0.008"	-0.0005" to 0.0005"	Hardened	Not Rated	1,450	00000000	00000
0.009"	-0.0005" to 0.0005"	Hardened	Not Rated	1,155	0000000	00000
0.01"	-0.0005" to 0.0005"	Hardened	Not Rated	935	0000000	00000
0.011"	-0.0005" to 0.0005"	Hardened	Not Rated	730	0000000	00000
0.012"	-0.0005" to 0.0005"	Hardened	Not Rated	650	0000000	00000
0.013"	-0.0005" to 0.0005"	Hardened	Not Rated	550	0000000	00000
0.014"	-0.0005" to 0.0005"	Hardened	Not Rated	475	0000000	00000
0.016"	-0.0005" to 0.0005"	Hardened	Not Rated	365	0000000	00000
0.018"	-0.0005" to 0.0005"	Hardened	Not Rated	285	0000000	0000
0.02"	-0.0005" to 0.0005"	Hardened	Not Rated	230	0000000	0000
0.022"	-0.0005" to 0.0005"	Hardened	Not Rated	190	0000000	0000
0.024"	-0.0005" to 0.0005"	Hardened	Not Rated	160	0000000	0000
0.026"	-0.0005" to 0.0005"	Hardened	Not Rated	140	0000000	0000
0.029"	-0.0005" to 0.0005"	Hardened	Not Rated	140	0000000	0000
0.031"	-0.0005" to 0.0005"	Hardened	Not Rated	110	0000000	0000
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	86	0000000	0000
0.035"	-0.0005" to 0.0005"	Hardened	Not Rated	76	0000000	0000
0.037"	-0.0005" to 0.0005"	Hardened	Not Rated	68	0000000	0000
0.039"	-0.0005" to 0.0005"	Hardened	Not Rated	61	0000000	0000
0.041"	-0.0005" to 0.0005"	Hardened	Not Rated	55	0000000	0000
0.043"	-0.0005" to 0.0005"	Hardened	Not Rated	50	0000000	0000
0.045"	-0.0005" to 0.0005"	Hardened	Not Rated	46	0000000	0000
0.047"	-0.0005" to 0.0005"	Hardened	Not Rated	42	0000000	0000
0.049"	-0.0005" to 0.0005"	Hardened	Not Rated	39	0000000	0000
0.051"	-0.0005" to 0.0005"	Hardened	Not Rated	36	0000000	0000
0.055"	-0.0005" to 0.0005"	Hardened	Not Rated	31	0000000	0000
0.059"	-0.0005" to 0.0005"	Hardened	Not Rated	27	0000000	0000
0.063"	-0.0005" to 0.0005"	Hardened	Not Rated	22	0000000	0000
1 lbs. Coil
0.009"	-0.0005" to 0.0005"	Hardened	Not Rated	4,625	0000000	00000
0.01"	-0.0005" to 0.0005"	Hardened	Not Rated	3,745	0000000	00000
0.012"	-0.0005" to 0.0005"	Hardened	Not Rated	2,600	0000000	00000
0.013"	-0.0005" to 0.0005"	Hardened	Not Rated	2,215	0000000	00000
0.014"	-0.0005" to 0.0005"	Hardened	Not Rated	1,910	0000000	00000
0.016"	-0.0005" to 0.0005"	Hardened	Not Rated	1,465	0000000	00000
0.018"	-0.0005" to 0.0005"	Hardened	Not Rated	1,155	0000000	00000
0.02"	-0.0005" to 0.0005"	Hardened	Not Rated	935	0000000	00000
0.022"	-0.0005" to 0.0005"	Hardened	Not Rated	775	0000000	00000
0.024"	-0.0005" to 0.0005"	Hardened	Not Rated	650	0000000	00000
0.026"	-0.0005" to 0.0005"	Hardened	Not Rated	560	0000000	00000
0.029"	-0.0005" to 0.0005"	Hardened	Not Rated	445	0000000	00000
0.031"	-0.0005" to 0.0005"	Hardened	Not Rated	390	0000000	00000
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	340	0000000	00000
0.035"	-0.0005" to 0.0005"	Hardened	Not Rated	305	0000000	00000
0.037"	-0.0005" to 0.0005"	Hardened	Not Rated	270	0000000	00000
0.039"	-0.0005" to 0.0005"	Hardened	Not Rated	245	0000000	00000
0.041"	-0.0005" to 0.0005"	Hardened	Not Rated	220	0000000	00000
0.043"	-0.0005" to 0.0005"	Hardened	Not Rated	200	0000000	00000
0.045"	-0.0005" to 0.0005"	Hardened	Not Rated	185	0000000	00000
0.047"	-0.0005" to 0.0005"	Hardened	Not Rated	170	0000000	00000
0.049"	-0.0005" to 0.0005"	Hardened	Not Rated	155	0000000	00000
0.051"	-0.0005" to 0.0005"	Hardened	Not Rated	140	0000000	00000
0.055"	-0.0005" to 0.0005"	Hardened	Not Rated	120	0000000	00000
0.059"	-0.0005" to 0.0005"	Hardened	Not Rated	105	0000000	00000
0.063"	-0.0005" to 0.0005"	Hardened	Not Rated	94	0000000	00000
0.067"	-0.0005" to 0.0005"	Hardened	Not Rated	83	0000000	00000
0.071"	-0.0005" to 0.0005"	Hardened	Not Rated	74	0000000	00000
0.075"	-0.0005" to 0.0005"	Hardened	Not Rated	68	0000000	00000
0.08"	-0.0005" to 0.0005"	Hardened	Not Rated	58	0000000	00000
0.091"	-0.001" to 0.001"	Hardened	Not Rated	46	0000000	00000
0.094"	-0.001" to 0.001"	Hardened	Not Rated	43	0000000	00000
0.102"	-0.001" to 0.001"	Hardened	Not Rated	36	0000000	00000
0.105"	-0.001" to 0.001"	Hardened	Not Rated	34	00000000	00000
0.11"	-0.001" to 0.001"	Hardened	Not Rated	32	0000000	00000
0.12"	-0.001" to 0.001"	Hardened	Not Rated	26	00000000	00000
0.125"	-0.001" to 0.001"	Hardened	Not Rated	24	0000000	00000
0.148"	-0.001" to 0.001"	Hardened	Not Rated	17	00000000	00000
0.187"	-0.001" to 0.001"	Hardened	Not Rated	10	00000000	00000
5 lbs. Coil
0.016"	-0.0005" to 0.0005"	Hardened	Not Rated	7,325	00000000	000000
0.018"	-0.0005" to 0.0005"	Hardened	Not Rated	5,785	00000000	000000
0.02"	-0.0005" to 0.0005"	Hardened	Not Rated	4,685	00000000	000000
0.024"	-0.0005" to 0.0005"	Hardened	Not Rated	3,255	00000000	00000
0.026"	-0.0005" to 0.0005"	Hardened	Not Rated	2,800	0000000	00000
0.029"	-0.0005" to 0.0005"	Hardened	Not Rated	2,235	0000000	00000
0.031"	-0.0005" to 0.0005"	Hardened	Not Rated	1,955	0000000	00000
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	1,720	0000000	00000
0.035"	-0.0005" to 0.0005"	Hardened	Not Rated	1,525	0000000	00000
0.037"	-0.0005" to 0.0005"	Hardened	Not Rated	1,370	0000000	00000
0.039"	-0.0005" to 0.0005"	Hardened	Not Rated	1,235	0000000	00000
0.041"	-0.0005" to 0.0005"	Hardened	Not Rated	1,115	0000000	00000
0.043"	-0.0005" to 0.0005"	Hardened	Not Rated	1,015	0000000	00000
0.045"	-0.0005" to 0.0005"	Hardened	Not Rated	925	0000000	00000
0.047"	-0.0005" to 0.0005"	Hardened	Not Rated	850	0000000	00000
0.051"	-0.0005" to 0.0005"	Hardened	Not Rated	720	0000000	00000
0.055"	-0.0005" to 0.0005"	Hardened	Not Rated	620	0000000	00000
0.059"	-0.0005" to 0.0005"	Hardened	Not Rated	540	0000000	00000
0.063"	-0.0005" to 0.0005"	Hardened	Not Rated	470	00000000	00000
0.067"	-0.0005" to 0.0005"	Hardened	Not Rated	415	00000000	00000
0.071"	-0.0005" to 0.0005"	Hardened	Not Rated	370	00000000	00000
0.075"	-0.0005" to 0.0005"	Hardened	Not Rated	340	00000000	00000
0.08"	-0.0005" to 0.0005"	Hardened	Not Rated	290	00000000	00000
0.091"	-0.001" to 0.001"	Hardened	Not Rated	230	00000000	00000
0.094"	-0.001" to 0.001"	Hardened	Not Rated	215	00000000	00000
0.102"	-0.001" to 0.001"	Hardened	Not Rated	180	00000000	00000
0.105"	-0.001" to 0.001"	Hardened	Not Rated	170	00000000	00000
0.11"	-0.001" to 0.001"	Hardened	Not Rated	160	00000000	00000
0.12"	-0.001" to 0.001"	Hardened	Not Rated	130	00000000	00000
0.125"	-0.001" to 0.001"	Hardened	Not Rated	120	00000000	00000
0.148"	-0.001" to 0.001"	Hardened	Not Rated	85	00000000	00000
0.187"	-0.001" to 0.001"	Hardened	Not Rated	50	00000000	00000

					1 ft. Lg.
Dia.	Dia. Tolerance	Heat Treatment	Temperature Range	Pkg. Qty.		Pkg.
0.006"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	000000
0.008"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.009"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.01"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.011"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.012"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.013"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.014"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.016"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.018"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.02"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.022"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.024"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.026"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.029"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.031"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	0000
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.035"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.037"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.039"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.041"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.043"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.045"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.047"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.049"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.051"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.055"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.059"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.063"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	00000
0.105"	-0.001" to 0.001"	Hardened	Not Rated	25	0000000	00000
0.12"	-0.001" to 0.001"	Hardened	Not Rated	10	0000000	00000
0.125"	-0.001" to 0.001"	Hardened	Not Rated	25	0000000	00000
0.148"	-0.001" to 0.001"	Hardened	Not Rated	5	0000000	00000
0.187"	-0.001" to 0.001"	Hardened	Not Rated	5	0000000	00000

Lubricated 1065 Spring Steel Wire

Heat Treatment: Hardened
Tensile Strength: 195,000 psi
Specifications Met: ASTM A229, MIL-W-21425 Type 1

This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

					1 ft. Lg.			3 ft. Lg.
Dia.	Dia. Tolerance	Heat Treatment	Finish Color	Temperature Range	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Matte
0.047"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	000000	6	0000000	00000
0.054"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	0000
0.063"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	0000
0.072"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	0000
0.08"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	0000
0.092"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	00000
0.105"	-0.002" to 0.002"	Hardened	Black	Not Rated	12	0000000	00000	6	0000000	00000
0.12"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	0000
0.125"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	0000
0.148"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	00000
0.162"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	00000
0.177"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	00000
0.187"	-0.002" to 0.002"	Hardened	Black	Not Rated	6	0000000	00000	3	0000000	00000

Lubricated 1065 Spring Steel Wire Assortments

Tensile Strength: 243,000 psi
Specifications Met: ASTM A229
Heat Treatment: Hardened

Always have the right size wire on hand with a 72-piece assortment. This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.

For technical drawings and 3-D models, click on a part number.

			18" Lg.
Heat Treatment	Finish Color	Includes		Each
Matte
Hardened	Black	12 each of 0.072", 0.080", 0.091" and 0.105" wire 18 each of 0.062" diameter wire 6 each of 0.120" wire	0000000	000000