We will reply to your message within an hour.
More
18-8 stainless steel screws have good chemical resistance.
More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.
Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.
These steel screws are available with corrosion-resistant finishes.
One-third the weight of steel, aluminum screws resist corrosion in wet environments.
A thick, decorative head provides a finished appearance.
A free-rotating, permanently attached washer distributes holding pressure over a wider area than a flange and remains stationary to prevent scratching the material surface as you tighten the screw.
A flange under the head distributes holding pressure and reduces the risk of crushing thin metal.
These steel screws have a black-oxide finish to resist corrosion in dry environments.
Stronger and more wear resistant than 316 and 18-8 stainless steel, these screws are mildly chemical resistant.
These steel screws are zinc plated to resist corrosion in wet environments.
Made from 18-8 stainless steel, these screws are chemical resistant.
Stronger and more wear resistant than 18-8 stainless steel, these screws are mildly chemical resistant.
Drill a pilot hole, cut threads, and fasten in one motion with these metric-threaded screws. Made of steel, they’re strong and wear resistant.
The extra-wide truss head distributes holding pressure to reduce the risk of crushing thin metal.
A decorative rounded top provides a finished appearance.
These steel screws save you time and effort by drilling their own holes and fastening in a single operation.
With a drilling tip, these metric screws cut their own pilot hole and threads as you fasten them into material.
Made from stainless steel, these screws are more corrosion resistant than steel, and almost as strong.
Also known as roofing screws, these screws are long and made from hardened steel to fasten rigid insulation board to steel decking.
These screws have a free-rotating, permanently attached washer that remains stationary while tightening to prevent bunching while attaching tarps and other fabric to metal.
Beveled under the head for use in countersunk holes.
For a finished appearance that reduces the chance of snags on other material, these screws fit snugly in countersunk holes and have a domed head.
These steel screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws.
Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.
Commonly used with door hinge hardware, these screws cut threads in material such as aluminum and brass.
These metric screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.
Also known as Swageform screws, threads at the tip are designed to grab material for a fast start with low torque in a wide range of materials.
These 18-8 stainless steel screws have good chemical resistance.
These steel screws have alternating high and low threads to minimize cracking and splitting in brittle material such as phenolic and glass-filled plastic.
A point centers the screw in a starter hole and widely spaced threads reduce the risk of cracking plastic.
These 316 stainless steel screws have excellent resistance to chemicals and salt water.
Often used for drawer slides and cabinet hardware, these screws—also known as Euro and Type B screws—create a strong hold in small, shallow holes in wood.
Also known as deck screws, these Phillips screws have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material.
Screws are beveled under the head for use in countersunk holes.
These screws are beveled under the head for use in countersunk holes.
Brass screws are corrosion resistant in wet environments and electrically conductive.
A decorative rounded top provides a finished appearance. These Phillips screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold.
These Phillips head screws have a decorative rounded top that provides a finished appearance.
Attach metal framing to metal studs up to 0.036" thick.
A drill point powers through metal up to 0.105" thick.
Hold sheets of drywall together until glue sets
Attach drywall to metal studs up to 0.036" thick.
Alternating high and low threads minimize driving torque and allow the screw to hold more material between threads for a stronger hold and better strip-resistance than standard drywall screws for wood.
Power through drywall and into metal studs up to 0.105" thick.
Ribs under the head act as a brake to prevent over-tightening and damaging threads.
These screws have a head that's one-third smaller than other drywall screws. Use them to attach drywall to metal studs up to 0.036" thick.
A drill point powers through drywall and into metal studs up to 0.105" thick. Heads are one-third smaller than those of other drywall screws.
Hang drywall to wood framing. These screws have a sharp point that penetrates drywall and a curved neck that sinks in without tearing the paper surface.