Bolt-On Fall-Arrest Anchor Points
Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Material | Connection Type | Dia. | No. of | Fasteners Included | Each | |
Bolt On | |||||||
| 310 | Steel | D-Ring | 9/16" | 2 | No | 00000000 | 000000 |
Stationary I-Beam Fall-Arrest Anchor Points
Mount this anchor to vertical and horizontal I-beams.
For I-Beam Flange | ||||||
|---|---|---|---|---|---|---|
| Wd. | Thick. | Capacity, lbs. | Material | Connection Type | Each | |
Clamp On | ||||||
| 4" to 14" | 1 1/2" | 310 | Stainless Steel | D-Ring | 00000000 | 0000000 |
Webbing Boom Strap Fall-Arrest Anchor Points
Attach to the arm of a bucket truck. The strap has a cinching buckle for a snug, nonslip fit.
| For Max. Dia. | Capacity, lbs. | Material | Construction | Connection Type | Features | Each | |
| 42" | 350 | Polyester | Webbing | D-Ring | Cinching Buckle | 00000000 | 000000 |
Nail-On Fall-Arrest Anchor Points for Roofs
| Capacity, lbs. | Material | Connection Type | Fasteners Included | Each | |
Nail On | |||||
|---|---|---|---|---|---|
| 310 | Steel | D-Ring | No | 00000000 | 000000 |
Push-In Fall-Arrest Anchor Points for Concrete
Wedge this anchor into a drilled mounting hole—it's good for vertical and horizontal concrete applications.
| For Mounting Hole Dia. | Capacity, lbs. | Material | Connection Type | Each | |
Push In | |||||
|---|---|---|---|---|---|
| 5/8" | 400 | Steel | D-Ring | 00000000 | 000000 |
Fall-Arrest Anchor Points with Winch
This system provides support when lowering workers into and retrieving them from tight spaces. Use the hand-operated winch to control lifting and lowering. You supply a harness.
The system comes with an adjustable mast and a separate portable base. For fixed-base installation, use the wall-mount or floor-mount base—weld or bolt the base to a concrete or steel structure and insert the mast into the opening.
| Wire Rope Lg., ft. | Ht. | Arm Lg. | Capacity, lbs. | Material | Snap Hook Material | Wire Rope Material | Features | Specifications Met | Each | |
| 60 | 45" to 62" | 12" to 29" | 310 | Aluminum/Steel | Steel | Galvanized Steel | Portable Base | ANSI Z359.4 | 0000000 | 000000000 |
Shock-Absorbing Fall-Arrest Lanyards
 |  Single Leg |  Dual Leg |
 |
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Dual Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Twist-Locking Carabiners—Not for Lifting
Latch
Position
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.
Zinc-plated steel carabiners are mildly corrosion resistant. Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance. Stainless steel carabiners have excellent resistance to salt water and chemicals.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Each | |
Pull Down/Twist 90°/Push In | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
17-4 PH Stainless Steel | |||||||||||
| 3 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 000000 |
| 4 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1 1/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
| 5 | 11,200 | 7/16" | 1 3/16" | 4 1/16" | 1 3/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | |||||||||||
Zinc-Plated Steel | |||||||||||
| 6 | 5,000 | 7/16" | 13/16" | 3 1/4" | 1 1/4" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 7 | 5,000 | 7/16" | 1" | 4" | 3/8" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 8 | 5,000 | 9/16" | 2 1/4" | 7 1/2" | 1 13/16" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 9 | 5,000 | 9/16" | 1 3/16" | 6 1/8" | 1" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 000000 |
Anodized Aluminum | |||||||||||
| 12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 000000 |
| 17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
420 Stainless Steel | |||||||||||
| 6 | 5,000 | 7/16" | 7/8" | 3 7/16" | 1 1/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |